We supply pink sea garnet 98.5 % purity fresh sea garnet.
Well wash and sieved with chloride content less than 15 ppm,
conductivity less than 25 ms/cm.
Premium for sand blasting in oil pipe, shipyards, steel structure industries.
We have successfully developed a new generation of high-performance alumina powder that can meet the needs of ceramics, refractories and other industries, with high melting point, excellent mechanical strength, hardness, high resistivity and thermal conductivity.
According to different requirements, five series of products have been formed, including dry pressing, hot die casting, refractory, casting and setting, structural ceramic granulator, etc. It can be widely used in electronic equipment, structural ceramics, refractories, wear-resistant materials, polishing materials and other industries.
We strictly controls the production process and always pays attention to the product quality. Strict quality control and precise processing procedures ensure the batch consistency and stability of each specification of products to meet the requirements of different customers.
High alumina ball means alumina ball with aluminium oxide content higher than 90%, high alumina ball is high efficiency grinding media in today industry. The high alumina ball works together with the high alumina mill linings brick will benefits you:
> Less grinding time, doubled productivity.
> Less wear loss of the ball and linings, more clean you final product keep.
> Longer service life, less down time
Physical Properties:
1) Bulk Density : 60mm > 3.65, 50mm > 3.65, 40mm > 3.65, 30mm > 3.65, 20mm > 3.63
2) Self Wearloss (24h) : < 0.04
3) Water absorption : < 0.1%
4) Hardness (M0hs) : 9
5) Service Temp : > 1600 C
6) Color : White
Our company has the domestic advanced production line of silicon carbide particle size sand,
silicon carbide powder production line, silicon carbide ceramic products production line,
Silicon carbide micro - powder channel reactor production line and related core intellectual property
rights to produce different specifications of section sand, mesh sand, fine powder and ultrafine powder.
Can meet the needs of different customers.With anthracite as smelting raw material, silicon carbide
products have low ash content, low sulfur, low phosphorus, high calorific value,
High mechanical strength, high chemical activity, high specific resistance and other characteristics,
is the world's highest quality level of silicon carbide products.The product is widely used in abrasive
products refractory, deoxidizer used in iron and steel bonding anti-slip materials, petrochemical,
dust chemical industry and other industries.In mining metallurgy, metal, furnace, machinery,
iron and steel, energy, environmental protection, electronics, semiconductor, aerospace,
automobile and other industries, silicon carbide new technology in Rico optical materials,
thin film materials, radiation resistance devices, high temperature pressure sensors, ultra-high
pressure detectors and other fields show a wider application prospect.
Shanghai Shineline Abrasives Co.,ltd offer high quality brown fused alumina, white fused alumina powder and grit for abrasives, blasting media, refractories. FEPA grade, JIS grade , special size orders are all accepted.
All orders will be delivered in time.
Product details:
1. Frosted cover board
high temperature resistant, explosion-proof frosted technology, the latest glue filling technology provide workers more safety protection.
2. High temperature calcined emery cloth is a kind of emery cloth with high temperature treatment, used for making flap disc . The grinding rate is sharp. Feel light, spark life is higher than ordinary emery cloth, grinding rate is improved.
3. Application:
The flap disc is used in metal, wood and other industries for grinding and finishing complex surface. It uses vulcanized fiber as basic material, high-grade abrasive cloth as grinding
materials, it is made by special process, builted in angle grinder, use for grinding iron, nonferrous metal, stainless steel ,stone and plastic, weld, and removing burr and flashing in impact parts.
It has the advantages of good elasticity, good self-sharpening, high grinding efficiency, good heat dissipation, low noise and long service life.
Backing: Plastic and fiberglass
Number of sheet: 72 sheet
Packing Details: 10pcs/shrink, 300pcs/ctn
Grit: 50# 60# 80# 120# 150# 180# 240# 320#
Garnet sand is a good abrasive, and a common replacement for silica sand in sand blasting. The garnet, as it is mined and collected, is crushed to finer grains; all pieces which are larger than 60 mesh (250 micrometers) are normally used for sand blasting.
We specialize in manufacturing quality Abrasive Garnet Abrasives, which is widely used in Sand Blasting, surface preparation, Waterjet Cutting and three-way filtration systems. Known for its high specific gravity, which enables heavy filtration, the offered sand is made using sophisticated manufacturing units equipped with cutting edge technology instruments. All our products are made to pass through stringent parameters of quality control for ensuring the delivery of superior grade products to our client and prompt / consistent shipments. Currently we export to UAE, Qatar, Kuwait, Saudi Arabia, Bahrain, Egypt and Europe. We also have stocks and distribution facility in Dubai to cater urgent requirements
We offer grade such as TMC-12-24, TMC-30-60, TMC-20-40, TMC-20-60, TMC-80,
We specialize in manufacturing quality Abrasive Garnet Abrasives, which is widely used in Sand Blasting, surface preparation, Waterjet Cutting and three-way filtration systems. Known for its high specific gravity, which enables heavy filtration, the offered sand is made using sophisticated manufacturing units equipped with cutting edge technology instruments. All our products are made to pass through stringent parameters of quality control for ensuring the delivery of superior grade products to our client and prompt / consistent shipments. Currently we export to UAE, Qatar, Kuwait, Saudi Arabia, Bahrain, Egypt and Europe. We also have stocks and distribution facility in Dubai to cater urgent requirements
We offer grade such as TMC-12-24, TMC-30-60, TMC-20-40, TMC-20-60, TMC-80,
SMM Garnet is one of world's best quality from India used for multiple industries such as blasting, water jet cutting and filtration. Grades range from 14/40, 20/40, 30/60, 50/80, 60, 80, 100, 120 and 200. We possess two manufacturing plant in India and Malaysia. Payment terms: Negotiable. Packaging: 25kg / 1mt Jumbo bag. Custom packaging with client branding available with MOQ. FOB Vizag & Port Klang.
PS Balls are most commonly used as an abrasive for the surface preparation of steel prior to the application of paint coatings. As PS Ball does not contain Free Silica, it is non toxic and in compliance with environmental regulations the world over. Payment terms: Negotiable. Packaging: 1/1.5mt Jumbo Bags. Please contact for best pricing and service.
Melfort Abrasives and Tools has been a leading manufacturer of velcro backing pad and supplier of various other types of abrasives and cutting tools in India. Over the years, we have grown into an enterprise offering a wide range of products across multiple categories. Some of our leading products include Diamond cutting disc, Wood cutting disc, Velcro disc and Sanding fiber disc etc.
