Black fused alumina, also known as low-aluminum corundum, is a gray-black crystal with α-Al2O3 and iron spinel as the main ore phase, which is obtained by melting aluminum bauxite in an electric arc furnace. It is characterized by low Al2O3 content. There is a certain amount of Fe2O3 (about 10%), so it has the characteristics of moderate hardness, high toughness, high temperature resistance and stable thermal performance. It is mostly used for free grinding, such as grinding and rough grinding before electroplating of products. It is mainly used for polishing and sand blasting of stainless steel, metal products, optical glass, bamboo and wood products, and is also a novel abrasive for manufacturing resin grinding wheels, cutting sheets and abrasive cloths.
White fused alumina oxide is manufactured by the fusion of controlled quality pure grade Alumina in an electric arc furnace at temperatures greater than 2000C followed by a slow solidification process.
Strict control over quality of raw materials and fusion parameters ensure products of high purity and high whiteness.
The cooled crude is further crushed, cleaned of magnetic impurities in high intensity magnetic separators and classified into narrow size fractions to suit the end use.
Corn cob powder is made from corn core,it has the advantages of uniform structure, good hardness, good toughness, good water absorption and good abrasion resistance.
It can be applicated cfeed premix, a variety of mold agents, antifungal agents, vitamins.it is also a production of veterinary drugs carrier, carrier is bean cake powder and other alternatives.
YCang flap disc are widely used for surface grinding and edge of oblique angle cleaning. YCang shall provide you with technical guide whenever you want to select grinding wheels.From ordinary manufacture to metal related industry,such as steel,stainless steel,collarde metal and nuclear industry,YCang can always meet your demands.The serial products also include stone material flap disc and cupshaped wheels.
The outer diameter of this product is 180mm, with a thickness of 1.6mm and an inner diameter of 22mm. This product has the sharp, the cutting speed is quick and so on the characteristic
The outer diameter of this product is 180mm, with a thickness of 1.6mm and an inner diameter of 22mm. This product has the sharp, the cutting speed is quick and so on the characteristic
Garnet Abrasive Description: Garnet abrasives use the high quality almandine as raw material,Website:http://www.abrasivesupplier.com, produced after machining and water, magnetic, and screened. With excellent performances such as self-sharpening, proper hardness, good toughness, sharp edges, low loss and longer life etc, garnet is widely used in chemical plants, oil & petrochemical industries, for blasting and water jet cutting in the field of construction & maintenance of ship and containers, and building industries etc. Physical characteristics:Physical ItemsGrainsColorRed BrownToxicityNoneMelting Point1300â??Solubility in WaterNot Soluble in WaterSpecific Gravity3.90-4.10 g/cm3ConductivityLess Than 125us/cmMohs Hardness7.5-8.0Pathological EffectsNoneReactivityNone Average Chemical composition:SiO237.09%Al2O320.11%FeO29.73%Fe2O31.83%TiO20.46%MgO5.26%CaO2.09%MnO1.19% Mineral CompositionAlmandite Garnet>98.0%Ilmenite
Shandong kaitai group co., ltd. Is the largest manufacturer of metal abrasive in asia which integrates with technical research, development and production. Cooperating with material science & engineering college of shandong university and guided by experts and professors of metal abrasive field. The company has developed 8 series including cast steel shot, cast steel grit, steel cut wire shot, stainless steel shot, stainless steel cut wire shot, aluminium shot, zinc shot, copper shot, 80 kinds of abrasive products. The company could produces 250, 000 tons metal abrasive. Based on 300 million yuan (rmb) of fixed assets, with a yearly turnover of 500 million yuan (rmb). Kaitai steel shot abrasive (hongkong) co., ltd. Is in charge of overseas sales of steel shot, steel grit.
The company is advanced & new technology enterprise of shandong province and national blasting & peening standardization technology committee unit. With strong technical force, advanced equipments like intermediate frequency induction furnace, centrifugal blasting machine and so on. The company could produces high strength, strong durability cast steel shot, cast steel grit through double quenching, tempering, screening and so on. The company has perfect quality control system. The company has introduced two ervin test machine from usa. Ervin test machine is mainly used for testing fatigue life of metal abrasive.
Ball mill liner
Three characteristics:
1.High wear and impact resistance
With scientific and reasonable formulation of alloy elements, the high manganese steel liner is multivariate micro-alloying on the basis of the original high-manganese steel, then it has good physical and chemical properties, such as the hardness hrc52-56, the impact toughness value larger than 150j, using life is more than twice as high manganese steel. So it can tolerate a huge impact strength. In a long-term work it can keep lining surface state so ensure a stable increase of more than 5% of production.
2. High strength, high toughness
By using the special quenching medium agent with thermal stability in the quenching process, high manganese steel liners combine high strength, high hardness and high toughness perfectly, which can satisfy high wear resistance and high impact loads process requirements.
3.High cost-effective, strong adaptability
Through the reasonable alloying elements and advanced process of our company, high manganese steel liner has a high quenching hardness, high toughness characteristics. So that it not only has good wear resistance, but also shows excellent price compared with the ordinary liner. It can adapt to mine wet grinding, dry grinding, mixing mill and etc. High manganese steel liners use advanced heat treatment process and change the height of ball mills peak, trough. These all help improve grinding rate of ball mill and increase the 20% of machine-hour capacity.
Rong mao is ball mill liner, high manganese steel ball mill liner, magnetic liner, mill lining manufacturer in china
This band saw blade is suitable for beef, mutton and all kinds of bone. Universal Type:
1.sepcial harding and precision grinding of the tooth tip, so that more rapid sawing;
2.universal design can be easily cut straight line cut all kinds of frozen or fresh meatbone food;
3.the use of a unique of design of the variable tooth, so that cutting noise down to the minimum, saw the plane more flat, less loss;
4.the federal food grade stainless steel products, there is no need to worry about blade corrosion and rust, and the cutting surface is smooth, longer service life.
The sizes of product:
Thickness:055mm
Wide:16-19mm
Ps: Customized for demand.
Saw blades for the metal working industry
1.Hss saw blades from 40 mm up to 600 mm
2.Solid carbide saw blades from 15 mm up to 315 mm
3.Carbide tipped, tct circular saw blades for the steel cutting
4.Special sizes on demand
Saw blades for the metal working industry
1.Hss saw blades from 40 mm up to 600 mm
2.Solid carbide saw blades from 15 mm up to 315 mm
3.Carbide tipped circular saw blades for the steel cutting
4.Special sizes on demand
Saw blades for the metal working industry
1.Hss saw blades from 40 mm up to 600 mm
2.Solid carbide saw blades from 15 mm up to 315 mm
3.Carbide tipped, tct circular saw blades for the steel cutting
4.Special sizes on demand
Saw blades for the metal working industry
1.Hss saw blades from 40 mm up to 600 mm
2.Solid carbide saw blades from 15 mm up to 315 mm
3.Carbide tipped, tct circular saw blades for the steel cutting
4.Special sizes on demand
Saw blades for the metal working industry
1.Hss saw blades from 40 mm up to 600 mm
2.Solid carbide saw blades from 15 mm up to 315 mm
3.Carbide tipped, tct circular saw blades for the steel cutting
4.Special sizes on demand
Saw blades for the metal working industry
1.HSS saw blades from 40 mm up to 600 mm
2.solid carbide saw blades from 15 mm up to 315 mm
3.Carbide tipped, tct circular saw blades for the steel cutting
4.Special sizes on demand
Saw blades for the metal working industry
1.Hss saw blades from 40 mm up to 600 mm
2.Solid carbide saw blades from 15 mm up to 315 mm
3.Carbide tipped, tct circular saw blades for the steel cutting
4.Special sizes on demand
