X-631 wheel aligner
Fast, simple, profitable, the 8-CCD sensor Wheel Aligner from Launch, wireless data transfer with bluetooth technology or 433 MHz radio module.
Professional, Reliable, Affordable
Professionel: 20 degree CCD Camera
6 meter wheel base
8 toe sensors
Fast radio data transfer
Time saving features:
Standard measurement
Fast test, short overview of toe, camber, thrust angle in a second
Additional test, for accident cars
Lower car function, no need for lowering clamps
Customer defined car data base
Reliable: Solid constructions of sensor heads
Water protected
Standard batteries
Standard high quality Pc
Self centring clamps, optional adapters for Aluminium rims available
Cable free measurement, removes hassle for broken cables
Affordable:: Unbeatable price / performance ratio
Designed for long time use
Feature
* Complete test: The X-631 Wheel Aligner can be used to measure the most wheel alignment parameters, such as front wheel toe-in, front wheel camber, caster, Kingpin inclination, rear wheel toe-in, rear wheel camber, thrust angle, wheelbase difference, tread difference, axle offset, front wheel setback and rear wheel setback, etc.
* Complete databank: wheel alignment data of over 10,000 vehicle models is stored in the system. User can also add new data to the databank.
* Kingpin and camber adjustment real time display function.
* HELP information for vehicle adjustment.
* Language operating prompt function.
* Emergency power supply and in-time charging function.
* The probe rods provide LCD display function.
* Electronic level function.
* Black box self-diagnosis function.
* Front and rear probe rods interchangeable.
* Special test for Mercedes-Benz and BMW vehicles.
Features
* Infrared 8-beam and 16-sensor loop measurement, accurate and stable.
* Newly developed CCD signal processing technology, nearly uninfluenced by the strong sunlight.
* Complete system upgrading function.
* Unique voice prompt function and visualized animation, very easy to understand.
* Trustworthy operating system to give more convenient and safe operations.
* Keyboard quick switch operation.
* Both special version and common version are provided for user to select.
* Both normal version and demonstration version are provided to make user's training more convenient and quick.
* Large capacity (4000mAh) Lithium battery with low power consumption and dormancy mode of design.
* Camber, toe-in, battery electricity quantity, charging status and electronic level, etc. can be real-time displayed by LCD.
* In-block type of casting Aluminum alloy probe rods can strongly guarantee the stability and the test precision of the product.
KWA-300 3D Wheel Aligner is a precision measurement instrument designed to measure the wheel alignment parameters and compare them with the specifications provided by vehicle manufacturer. It also gives instructions to the user for performing corresponding adjustments so as to get the best steering performance and reduce tire wear.
Functions and Features
Complete test: The KWA-300 3D Wheel Aligner can be used to measure the most wheel alignment parameters, such as front wheel toe-in, front wheel camber, caster, Kingpin inclination, maximal steering angle, thrust angle, toe-out on turns, rear wheel toe-in, rear wheel camber, thrust angle, wheelbase difference, tread difference, etc.
Brand new 3D computer vision measurement: Automatically test the aligning angles with high performance camera.
Positive targets: There are any electronic elements inside the targets, and no cables between the targets and the main unit, so the targets are easy to be fastened on the wheel clamps.
Provides many kinds of auto test processes and diagram operating interfaces, very simple and clear to operate; The whole test process can be performed automatically, and there are some humanity tips on the corresponding interfaces.
Complete databank: Wheel alignment data of over 20, 000 vehicle models is stored in the system. User can also add new data to the databank.
Automatically record the history data, easy for customer measurement.
Standard printer to print test result.
Provide real-time help with help system.
Characteristics of 3D Wheel Alignment
1.3D cameras alignmentùBased on the car and not influenced by the platform
2.Measurement systemùequipped with double digital cameras and four target disk, supplying revolutionary measurement mode
3.Target diskùThere is no electronic components, so the wheel alignment will not has a component failure problem.
4.Equipment Calibration - once calibration before delivery, workable immediately after installation, no need for periodic calibration
5.Measurement progressùno need to compensate for steel ring , the precise eccentric compensation will be just once pulling or pushing the car back and forth
6.Software systemùùEasy to operate, complete conventional basic parameters within two minutes ,significantly faster than conventional aligners
7.Daily MaintenanceùEasily maintenance , download and upgrade freely for the model data.
Model No.DWB-1
M Max. wheel weight 65kg
Max.wheel dia 900mm
Motor power 0.18kw-0.33kw
Balancing precision í+1g
Balancing speed 230rpm
Rim dia 10úó-24úó
Rim width 1.5úó-20úó
Balancing cycle 7s
Noise ú+65dB.
Sensor diagnosis function
Error message alarm function
Symptom inspection function
Preliminary inspection function
User friendly configuration function
Speedy work stage selection function
Cuntomer vehiclc data management function
Standard rf wireless features provides extended range, high-speed communications
Latest vehicle spec db& advanced date management system
Dimension: 1350*900*1350mm
G.W.: 250kgs
N.W.:210kgs
Export standard packing
Dual hydraulic cylinders design: Each cylinder is designed and manufactured conforming to ANSI standards
Imported oil seal for cylinder.
Overhead safety shut-off device.
Simple, convenient and reliable hydraulic system.
The structure is safe and safe while operating, with low noise.
Specifications
Model: LF-4000FP
Max. Lifting Weight : 4000Kg
Max. Lifting Height : 1800mm
Min. Lifting Height: 130mm
Voltage:220V /380V
Power of Motor : 2.2 Kw
1. High-Resolution 8 sensors CCD (Charge-Coupled Device) Measuring System.
2. DSP High-Speed Processor. Highly integrated microprocessor provides immediate response between changes in actual measurement and displayed values.
3. Cordless XF-Radio technology Provides Extended Range, High-Speed Communication; Cables Connection also provided.
4. Rugged, Lightweight Design. Integrated electronic components enhance reliability. Outer sensor cover is made of special material, light and strong.
5. Cal-Check Toe Calibration. Sensors feature rear toe arms for total around-the-car toe calibration checking. Continuous checking ensures accurate toe measurements.
6. Level Reminder--Electronic level. An on-screen display indicates if sensor leveling is required.
7. Range Finder. Range Finder feature calculates track width and wheelbases up to 210 inches (5334 mm).
8. Continuous Runout Compensation. Each sensor allows for an easy, precise 4-point ROC Technology, which ensures that the sensor will continue to read accurate alignment angles, even if any wheels rotate.
9. Self-Centering Wheel Adaptors cover an extended range of vehicles.
10. Measuring Head is Self-calibrated to maintain accuracy, and can be interchanged freely without re-calibration.
11. Rechargeable Batteries can provide two days of continuous operation; í¦Hot-swappableí¦ operation ensures compensation measurements are not lost in the event of a power outage or if battery power is low.
12. Ultra-low Chassis Measuring Technology.
13. Multi-language: English, Spanish, French, Russian, Portuguese, Arabic etc.
14. Windows XP Operating System.
15. More than 10,000 types of Auto Specifications Database updated to 2009, including latest domestic and oversea auto models.
16. User can add new auto Models to the Database or Upgrade the database through our website.
17. Brand PC of Lenovo or DELL supported, 19" LCD Monitor.
18. User-Friendly Operation Interface, quick, precise measurement readings, easy to Operate.
19. Simple and Reliable Design, Customer own Requirements Welcomed.
1. High-Resolution 8 sensors CCD (Charge-Coupled Device) Measuring System.
2. DSP High-Speed Processor. Highly integrated microprocessor provides immediate response between changes in actual measurement and displayed values.
3. Cordless XF-Radio technology Provides Extended Range, High-Speed Communication; Cables Connection also provided.
4. Rugged, Lightweight Design. Integrated electronic components enhance reliability. Outer sensor cover is made of special material, light and strong.
5. Cal-Check Toe Calibration. Sensors feature rear toe arms for total around-the-car toe calibration checking. Continuous checking ensures accurate toe measurements.
6. Level Reminder--Electronic level. An on-screen display indicates if sensor leveling is required.
7. Range Finder. Range Finder feature calculates track width and wheelbases up to 210 inches (5334 mm).
8. Continuous Runout Compensation. Each sensor allows for an easy, precise 4-point ROC Technology, which ensures that the sensor will continue to read accurate alignment angles, even if any wheels rotate.
9. Self-Centering Wheel Adaptors cover an extended range of vehicles.
10. Measuring Head is Self-calibrated to maintain accuracy, and can be interchanged freely without re-calibration.
11. Rechargeable Batteries can provide two days of continuous operation; í¦Hot-swappableí¦ operation ensures compensation measurements are not lost in the event of a power outage or if battery power is low.
12. Ultra-low Chassis Measuring Technology.
13. Multi-language: English, Spanish, French, Russian, Portuguese, Arabic etc.
14. Windows XP Operating System.
15. More than 10,000 types of Auto Specifications Database updated to 2009, including latest domestic and oversea auto models.
16. User can add new auto Models to the Database or Upgrade the database through our website.
17. Brand PC of Lenovo or DELL supported, 19" LCD Monitor.
18. User-Friendly Operation Interface, quick, precise measurement readings, easy to Operate.
19. Simple and Reliable Design, Customer own Requirements Welcomed.
1. Thin configuration, 115mm height when no lifting, no need base installation, suit for second floor and above or mobile workplace.
2. Extra length system of platform, adjust from 1440mm to 2020mm, suit for all kinds of car repair working.
3. In-phase cylinder, with In-phase system.
4. Lifting height adjust from 115mm to 1870mm, suit for different working height.
5. Aotomatic hydraulic lock system.
6. Imported pump and electronic components which is safe and credibility.
Product - wheel weights .Material-zn, fe.Zn is the no.1 zn according to international standard 4-1. Structure - dia-casting stick-on/clip-on.Product type - 5-60g, 5/10g * 4, 5g*12 and so on.Testing equipment - standard
Quality system -iso9001:2000.
According to weight from 5g-60g.
Unit size (hook-on) normally is : 310x215x190 mm
Wheel balancer
Product code nht 230
Automatic distance and wheel diameter measuring
Self diagnosis
Changeable between gram and ounce
Changeable between millimeter and inch
Protection cover
4alu functions for light alloy wheels
Full screen display for the a.B.D.Reading
Cycle time 8sec.
Maximum wheel weight 120kg
Maximum power absorption 350-500w
Standard power supply 110v/60hz
220v/50hz(1ph)
380v/50hz(3ph)
Balancing speed f_200rpm
Balancing precision f+1g
Rim diameter 10"-28"
Rim width 1.5"-20"
Net weight with cover 230kg
Noise <70db
Work air pressure 7-8mpa
Temperature 0-40fpc
