Incoterm: CIF and FAS MÃ?Ânimum 1,000 MT
Dear sirs We are stablished factory processing algaes from Chile. The 2 formats we can offer are the following: Durvillaea Antarctica: Raw Material Format: fresh frozen Moisture 35 / 50%, Packaged polietilene mesh Weight net / net 6 kilos each Loaded 1x40' reefer HC According to moisture percentage is the capacity of the final tonnage. 35% to 50 % app 7.000 kilos up 65% app 14.000 kilos Durvillaea Antartica as finished product Format: Spaguetti / Tubes and Slices Moisture: 12/15 % Packaged: 15 kilos polipropilene sacks 1x40' hc dry app 7000 kilos
Dear Customer, Below the offer for the anthracite coal I have available: 1. Anthracite Coal: 1. Price FOB Salaverry Port - Peru: $220 / MT MOQ: 500 MT MAX QUANTITY AVAILABLE MONTHLY: 35.000 MT Origin: Peru Delivery Time: To be Established Port of Loading : Salaverry Trujillo ; (Peru ) Details : HUMIDITY (%): 8.00 VOLATILE (%): 3-5% ASHES (%): 12-15% SULFUR (%): 0.7-0.8% FIXED CARBON (%): Min 80% Calorific power: Carbon Range (%) (Kcal/Kg) 6907.11 Any question dont hesitate to contact us:
For the calcined anthracite, fob 320-420usd tianjing port, quotation is valid utill this month, perment term is t/t. But the cost might be different at different purchasing date, so we need to check and update the offer for u again that day when u confirm order date exactly later, please be noted. The calcined anthracite coal is through high temperature treatment and screening, uniform particles, is one of the ideal materials for carburizer and electrode paste. In China, anthracite is usually calcined in electric calciners, rotary kilns and pot furnaces, and the anthracite produced in electric calciners is called as electrically calcined coal (ECA for short) while the anthracite produced in other two calciners is called as gas calcined coal (GCA for short). Electrically calcined anthracite coal, Electrical forging material is made from high-quality anthracite and during calcining, the temperature up to 2000 By calining the high-qualityanthracite, the Coal lattice is hanged Then the anthracite becomes half graphitization. Then the material can meet many demands by changing its physical and chemistry character The specification. Due to it is low in volatile matters, good in thermal and electrical conductivity with the powder resistivity about 600 and mainly used in carbon bricks, electrode pastes and cathode carbon blocks with certain requirements for electrical conductivity. Moreover, the proportion and particle size of ECA in such products vary depending on the situation of different enterprises. The calcination temperature of GCA is about 1200 and its electrical conductivity is far inferior to that of ECA, but the sulfur content of anthracite is usually 0.3-0.5%. GCA is widely used in steel and foundry industry as coal recarburizer by virtue of its higher cost performance. We have established a long-term cooperative relationship with anthracite plants in Vietnam. We also provide calcined anthracite coal and dried anthracite coal from Vietnam: Calcined Anthracite Coal FC 95% ASH 4% S 0.5% FC 92% ASH 6.5% S 0.5% Dried Anthracite Coal FC 85% Ash 11% VM 4% S 1% MO: 5% FC87% Ash7 VM 7% S 0.65 MO:5%
The Electrical Calcined Anthracite is used the best quality anthracite as raw materials through high temperature calcined at over 2000 by the DC electric calciner with results in eliminating the moisture and volatile matter from anthracite efficiently, improving the density and the electric conductivity and strengthening the mechanical strength and anti-oxidation. It has good characteristics with low ash, low resistvity, low sulphur, high carbon and high density. It is the best material for high quality carbon products to production of electrode, and used in cathode blocks for aluminum industry. 1.specification indexes: Fixed carbon 90% Ash 8% Volatile 1.2% Sulfur 0.35% Moisture 0.5% Resistivity 750 2 Fixed carbon 93% Ash 6% Volatile 1.0% Sulfur 0.30% Moisture 0.5% Resistivity 650 3 Fixed carbon 95% Ash 4% Volatile 1.0% Sulfur 0.25% Moisture 0.5% Resistivity 600 2.Real Density:1.80-1.90 G/CM3 min 3.Size:0-20mm,90%min; 1-20mm, 90%min; 1-10mm, 90%min,or at customers option; 4.Packing:In 1200kgs big bag; In 1000kgs big bag; In 25kgs small bag, then into 1000kgs big bag; or 25kgs or 50kgs small bag, then put into containers directly; or at customerâ??s option; 5.Payment:cash, letter of credit. Ningxia carbon valley International Co. Ltd to provide carbon additive, electrode,cold ramming paste, carbon block/brick, graphite block,half of graphite carbon block/brick,self baking carbon block,electrically calcined anthracite coal,electrode paste,silicon carbide,calcinde petrolem coke,The products are sold toJapan, Taiwan, Korea, India, America etc.
Carbon raiser used real Anthracite Coal as material. different material with different price in the market. In fact, the unit cost of carburizer in bituminous(soft) coal production is much higher than that in anthracite production. For example, for steel plants, 300 tons of anthracite carburizer is needed for 200000 tons of steel, but 500 tons of bituminous coal carburizer is needed. Any interesting,please contact us freely. wechat/WhatsAPP numbervis 008613739698406 E-mail ID is sophiawang110609@163.com
We offer 0-3 mm anthracite for barbecue briquette production. Hydroanthracite Total Moisture, (ISO 589) - 0.7 % Ash, (ISO 1171) - 4,4% Volatile Matter, (IS0562) - 2.8% Total Sulfur, (ISO 334) - 0.90% Fixed Carbon, - 92.1% Quantity 1000m / t per month
Product Description Using calcined anthracite coal carburizing agent and cast iron using carburizing agent steel, and other materials are also useful for adding to the carburant carburant is applied, steelmaking, iron carbon materials. High quality carburizing agent is essential to producing high quality steel auxiliary additives. Usage: For 1-5 T furnace: - while a small amount molten iron in the furnace, - or with some molten iron remained, add the carbon additive one-time, - then add the other material. which can make carbon additive fully absorbed. For greater than 5 T furnace: - mix proper carbon additive with charging material as suggested first, - and then along with the increase of charging material gradually, - that is, before the molten metal rising up to about 2/3 height of furnace, - all carbon additive shall be added. It guarantees sufficient melting & absorbing time before molten metal out, and improves the absorption of carbon.
1), High purity - Control the consistency of raw material from the mine resource. - Introduce automatic whole-process equipment to ensure product consistency. 2), Good performance - Increase globular graphite amount in the nodular cast iron significantly to promote the graphitization; - Increase the graphite crystal nucleus of molten iron, refine graphite in the matrix for more uniform distribution; 3), Fine classification - Various product category, to provide customized carbon raising scheme 4), Cost-saving - Reduce the usage amount of iron, increase scrap consumption, and save raw material cost. For 0-5 T furnace use: While a small amount molten iron in the furnace Or with some molten iron remained. add the carbon additive one-time Then add the other material Which can make carbon additive fully absorbed. For greater than 5 T furnace Mix proper carbon additive with charging material as suggested first, And then along with the increase of furnace charge down into the furnace inside gradually. That is, before the molten metal rising up to about 2/3 height of furnace All carbon additive shall be added It guarantees sufficient melting absorbing time before molten metal out, and improves the absorption of carbon.
Model No. CAC-01 CAC-02 CAC-03 CAC-04 CAC-05 Fixed carbon(Min) 90% 92% 93% 94% 95% Ash(Max) 8.50% 6.50% 5.50% 4.50% 3.50% Volaltie matter(Max) 1.50% 1.50% 1.50% 1.50% 1.50% Sulfur(Max) 0.30% 0.30% 0.30% 0.30% 0.30% Moisture(Max) 0.50% 0.50% 0.50% 0.50% 0.50% Size 1-3mm,1-5mm
Anthracite coal, copper cathode, petroleum coke..
Barite for oil drilling, coal bituminous, anthracite coal.
Jet a1, en 590 10ppm, d6, diesel and coal.Construction services in the middle east
Origin Anthracite Coal
F.C :84%-92% Ash :6%-15% max Moisture:3% max Sulphur: 1.0%max V.M: 4.0% max Size: 10-30mm MOQ:50,000MT
Anthracite filter media is a kind of filter used in water treatment. The product has large surface area, and its various indexes all exceed the construction department's standard. Anthracite filter media is especially selected from the deep well minerals, so it can contain the highest percentage of carbon. The raw material is always filter- ed and washed to make sure that the product can have a good effect on water filtration.
the Anthracite Coal catalog PRICES 6000-6500 KCAL (0-50 MM and 0-300MM). TOTAL MOISTURE -10.98 Mass Fraction -0.24 Ash Content -5.57 Ash Content -4.96 Volatile matter-45.77 Volatile matter-38.48 Sulphur-0.35 GAR-7665 NAR-6110
Coal mine for sale. The reserve is comprised of an estimated 70 million tons of in ground semi-anthracite coal under just over 10,000 acres This is probably the largest known coal mine and it has never been mined. Because of semi-anthracite's high fixed carbon content, elsewhere it has found its greatest use for Pulverized Coal Injection (PCI) in which the coal is injected into a blast furnace to substitute for a portion of the significantly more expensive coke. The expected average assay of the coal is as follows: 1) Ash: 6 to 9%; 2) Moisture: 60. With conventional preparation, this coal should be acceptable in the PCI market. If, however, this coal is processed through a special proprietary refinery, the assay of the coal is projected to be as follows (with a strong tendency to be the better number in each case): 1) Ash: 2.2 to 7.6%; 2) Moisture: 1 to 3%; 3) Volatile Matter: 9 to 11%; 4) Sulfur: 0.6 to 0.8% 5) Heating Value: 12,500 to 13,500 BTU/lb; 6) Fixed Carbon 80 to 90%; 7) FSI: 9. So processed, this biorefined coal is perfect for any of the uses of metallurgical coal. Price is negotiable
Anthracite is a type of coal with the best quality. The use of anthracite coal in steam power plants is classified as High Grade and Ultra High Grade coal. However, the supply is still very limited, which is as much as 1% of the total coal mining.
Ningxia Biyuan Activated Carbon Co., Ltd. sells carbon additive for sale anthracite coal for metallurgy carbon additive carbon, which is finished by series production process. The appearance of black, granular, with developed pores, good adsorption properties, high strength, economic advantages, product features and application range: high fixed carbon content, low sulfur content, stable oil effect, high carbon absorption rate, degree of graphitization The best is to increase the nucleation of molten iron, which is mainly used for smelting cast steel and cast iron. Ningxia Biyuan Activated Carbon Co., Ltd. is a professional manufacturer and has about eight years of different filter media production and domestic historical trade. Now we are committed to developing our international trade. We adhere to the principle of "integrity management, quality service". Our employees are professional and sincere, and our prices are fair. Look forward to working with you.
