Descriptions
Aluminium wafer is widely used in many industries including electronics cosmetics pharmaceuticals education auto parts electrical appliances insulation machinery manufacture vehicle space military mould construction printing etc. Cookware such as non-stick pans and pressure cookers hardware such as lamp shades and water heater shell are the largest consumers of aluminium alloy plate and coil.
Performance of Aluminum Circle
1. high corrosion resistance,electrical conductivity and thermal conductivity,its small density,good plasticity,through pressure processing can produce all kinds of aluminum;
2. the intensity is low, but has good ductility, formability and weldability;
3. to further improve the corrosion resistance after anodic oxidation, obtain and beautiful surface at the same time;
Descriptions
Aluminium wafer is widely used in many industries including electronics cosmetics pharmaceuticals education auto parts electrical appliances insulation machinery manufacture vehicle space military mould construction printing etc. Cookware such as non-stick pans and pressure cookers hardware such as lamp shades and water heater shell are the largest consumers of aluminium alloy plate and coil.
Performance of Aluminum Circle
1. high corrosion resistance,electrical conductivity and thermal conductivity,its small density,good plasticity,through pressure processing can produce all kinds of aluminum;
2. the intensity is low, but has good ductility, formability and weldability;
3. to further improve the corrosion resistance after anodic oxidation, obtain and beautiful surface at the same time;
ts of Aluminum Magnesium-Silicon alloy wires stranded in successive layers in opposite direction and the outer layer is right hand direction Z. Natural grease may be applied between the layers of AAAC except the outer layer.
STAQNDARD
Construction as per ASTM B399, DIN 48201, BS EN 50182, IEC 61089, CSA C49.
APPLICATION:
AAAC bare conductors are used for primay and secondary overhead power transmission lines having long spans and high resistance to corrosion.
Detailed Product Description
AAAC (All Aluminum Alloy Conductor) referred to have higher strength but lower conductivity than pure aluminum. Being lighter, alloy conductors can sometimes be used to advantage in place of the more conventional ACSR; Having lower breaking loads than the latter, their use becomes particularly favourable when ice and win loadings are low.
We can supply this conductor according to different recognized standards, such as BS EN50182, IEC61089, ASTM B399DIN 48, customer special specification also can be satisfied.
Body material: aluminium
Membrane: ePTFE
Sealing ring: silicone ring
Structure: with nut
Spec. M12x1.5-10,M5X0.8-10,M6X1.0-10,M10X1.0-10,
application:Outdoor lighting lamps, automobile electronic product, communication equipment, sports apparatus and equipment, LED, solar energy and other industries
The dimensions of cold forging heat sink,
1. Outside Diameter: as your request
2. Total Height: as your request
3. Base Thickness: as your request
4. Pin Height: as your request
5. Color: silver, gold, black, red, as your request
GLARY has an extensive range of options to provide the optimal cooling solution for your LED application.
Our precision forge process provides unique advantages for LED cooling.
Forging can produce round and other non-linear shapes that are preferred for LED applications.
The forge process uses high pressure to form the material and provides control over the grain structure to provide superior thermal performance.
LED`s are generally convection cooled and our forged pin fin arrays provide the best possible thermal performance in ambient environments.
Heat sinks can be forged in either aluminum or copper.
Sizes range from 40 mm diameter to 350mm and shapes can be almost any shape you need.
Standard or modified standard solutions
We can provide a solution from our standard product line and model it to ensure that it will provide adequate cooling for your application.
Custom design services
Our engineers can also work with you to design and model a custom solution optimized to meet the needs of your application.
Note:
All machined parts are just for your reference, machined parts can not be provided to you, but the original design can be provided. The machined part is belong to the customer who provide the original machined design.
The dimensions of cold forging heat sink,
1. Outside Diameter: as your request
2. Total Height: as your request
3. Base Thickness: as your request
4. Pin Height: as your request
5. Color: silver, gold, black, red, as your request
GLARY has an extensive range of options to provide the optimal cooling solution for your LED application.
Our precision forge process provides unique advantages for LED cooling.
Forging can produce round and other non-linear shapes that are preferred for LED applications.
The forge process uses high pressure to form the material and provides control over the grain structure to provide superior thermal performance.
LED`s are generally convection cooled and our forged pin fin arrays provide the best possible thermal performance in ambient environments.
Heat sinks can be forged in either aluminum or copper.
Sizes range from 40 mm diameter to 350mm and shapes can be almost any shape you need.
Standard or modified standard solutions
We can provide a solution from our standard product line and model it to ensure that it will provide adequate cooling for your application.
Custom design services
Our engineers can also work with you to design and model a custom solution optimized to meet the needs of your application.
Note:
All machined parts are just for your reference, machined parts can not be provided to you, but the original design can be provided. The machined part is belong to the customer who provide the original machined design.
Wanxie Power Technolog Co., Ltd Product Range
ABC insulation piercing Connectors
ABC strain clamp/ ABC Tension Clamp/Gun type Dead end clamps
JLC series C type clamps
PG parallel groove clamps
Cable Copper lug/Aluminium terminal lug/ Bi-Metallic Lugs
H type clamp
BLMT series torque terminals
Quick connector
Wedge grounding clamp
High voltage cable cleat
Transformer clamps/Equipment clamps
YZ clamps for hot line work
ABC Suspension clamps
Anchor NY-G strain clamp for steel wire
U type Shackle/Ball-eyes/Ball link
Yoke plate/Clevise
Shockproof dampers
Rod Composite tension insulator/Lighting Arrester
Contact
Mike Yang
International Trade Department
Email: Mike@wanxie.cc
Skype: wanxiepower
Web: www.wanxie.cc
Web: https://wanxie.en.alibaba.com
Tel: 0086-577-61661881
Fax:0086-577-62698355
Mobile&Whatsapp: 0086-15158533113
Wanxie Power Technology Co., Ltd
Address: No.128 Jingwu Rd, Economic Development Zone, Yueqing, Zhejiang, China
Aluminum panels are lightweight and durable Sizes of Metal Board 12x18 inches
A perfect medium for displaying artwork and photography in various applications from residential to commercial usage.
The sheet has a thin transparent film that must be removed before sublimation. Initially, it may seem that the sheet is scratched or stained, but in reality, what is stained is this thin film that protects the aluminum sheet.
Time: 1 Minute 30 Seconds
Temperature: 400 F (204 Celsius)
Pressure: Heavy
ACP sheet work
ACP sheet service and repairing work
Polycarbonate sheet
HPL sheet service work
Shera board wall cladding sheet
Shera board work
Birla aerocon sheet
Profile sheet work
G i sheet work
ACP sheet elevation
Home designing work
Exterior designing work
Interior designing work
Home construction
House construction
Aluminium louvers work
ACP sheet louvers
A to z all work
Welcome to our premium aluminum composite panels, where style and durability converge to redefine your spaces. Crafted with precision and innovation, our panels offer a seamless fusion of elegance and resilience, perfect for a variety of applications.
Key Features:
Superior Materials, Stylish Design, Easy Installation, Fire Safety, Low Maintenance, Eco-Friendly: Manufactured with eco-friendly processes and recyclable materials, our panels contribute to a sustainable future.
Applications:
Architectural Cladding, Interior Decoration, Signage and Branding, Furniture and Fixture
Experience the perfect blend of style and durability with our premium aluminum composite panels. Explore our range today and transform your spaces with confidence and ease.
We are the manufacturer of the below products:
1. Brucite Mg(OH)2 (use in ACP as Flame Retardant additives, fertilizer, flue gas desulfurization, waste water treatment, etc ) with MgO53%-64% ,
2. Magnesium oxide 80%-96% ï¼?used in flue gas desulfurization, fertilizer, animal feeds,etc), it is also called Caustic Calcined Magnesite ,
with own brucite and magnesite mine with lower SIO2 and Fe2O3 content.
Brucite Mg(OH)2 can be used in Alumium composite panel as flame retardant additive.
Magnesium hydroxide environmental protection halogen-free flame retardant is a common flame retardant, in addition to flame retardant and smoke elimination performance, and high dehydration temperature, suitable for processing high temperature PP and other polymer flame retardant modification, but also make flame retardant plastic easy to reuse.
Representatives of the application of inorganic flame retardant type magnesium hydroxide by chemical decomposition heat absorption and put hot water dilution mass fraction of oxygen in the air, forming insulating layer on the surface of a polymer flame retardant effect of magnesium oxide play are formed by decomposition with non-toxic, smoke, and decomposition product inhibition (aluminum oxide, magnesium oxide) series of chemical stability, so do not produce secondary damage.
Aluminum-plastic composite board, referred to as aluminum-plastic board, refers to a 3-layer composite board with plastic as the core layer and aluminum on both sides, and the surface of the product is covered with decorative and protective coating or film (otherwise known as coating) as the decorative surface of the product. Selecting flame retardant core material, the combustion performance of the product reaches the non-combustible grade (B1) or non-combustible grade (A); At the same time, other performance indicators must meet the technical requirements of aluminum - plastic board. So brucite (natural magnesium hydroxide) is the best flame retardant additive.
We are Bangladesh based ship recycling firm engaged in environment friendly scrap ship demolition. We can supply all kind of marine items like steel plate, scrap iron, brass, copper,stainless steel, zinc, electric cable, propeller, generator, cranes etc.
Please let us know your requirements. We shall be happy to work with you.
Hi. Dear customer I'm Azamat Saidalin the CEO of LLP SAZH-2014. I'm glad to introduce you our products we can supply. It's all about aluminium and copper. We can provide aluminium and cupper on CIF and Fob terms.
Please send your requests and offers. We are ready to for successful collaboration. Thank you in advance.
