Some senior engineers in the Custom Solid Aluminum Panel industry who are engaged in design or installation know that there are many places that can save the cost of the curtain wall aluminum veneer without affecting the building's effect.
So, we can talk about, how to do it can save cost?
1. When designing the keel diagram of the aluminum veneer, try not to be extra wide. As we all know, the raw materials of aluminum veneers are produced by aluminum ingots. Due to the influence of machinery and equipment, the common specifications of ordinary aluminum plates will not exceed 1500mm. Only under special requirements, the specifications of aluminum plates can be produced up to 2000mm. Of course, the cost will increase. Quite a lot.
2, to avoid the fancy design, should pay attention to the integrity of the production of aluminum veneer. Unrealistic design is not a manifestation of individuality, but does not conform to the rules of installation and production. Designers should pay attention to the practical performance of products and the rationality of production.
3, try to control the shape of the aluminum veneer, within the common shape of the Solid Aluminum Panel Manufacturer . The more complicated the aluminum veneer is, the more difficult it is to produce. The difficulty of producing the double-curved aluminum veneer is far more than that of the ordinary flat corner plate.
4, aluminum panels of different colors, try to separate the order, do not want to design easy, multi-color spray. The difficulty of spraying multi-color aluminum veneers is far greater than that of monochromatic aluminum veneers. Designers should pay attention to the simplicity of coveting design and neglect the difficulty of spraying aluminum veneers.
Curtain wall Solid Aluminum Panel and honeycomb aluminum plate are the hot materials in the current decoration and decoration market. They have many similar places, such as fire performance, quiet performance, etc., breaking the inherent mode of traditional decorative materials, breaking through the limits in practicality and beauty. Combine and become the hottest and preferred choice in the market.
So, what are the differences between curtain wall aluminum veneers and honeycomb aluminum panels?
1. Compared to the curtain wall aluminum veneer, because the honeycomb aluminum plate is a composite material, the inner aluminum honeycomb ensures that the plate itself can fully bear its own weight, so it does not need to add any reinforcing ribs. For ordinary curtain wall aluminum veneers with a width greater than 600 mm, it is necessary to weld stiffeners on the back side of the plate.
2. Because the curtain wall aluminum veneer is a single-layer product, it can be processed relatively easily, and has a strong styling ability; and the aluminum honeycomb panel as a composite product is less advanced in shape due to the processing constraints of its own products. Aluminum veneer.
3, honeycomb aluminum plate uses a buckle cover system, you can choose to hide the two systems of glue joints and glue joints exposed, because these two systems take into account the effects of thermal expansion and contraction, so the board surface can be free in four directions The expansion and contraction greatly reduces the influence of temperature stress on the flatness of the board surface; the surface of the ordinary single-layer aluminum board is easily warped because it is a system in which the glue joint is exposed.
4, the curtain wall aluminum veneer adopts the spraying process, through the link of the high temperature oven, the color selection is more diversified; and the honeycomb aluminum plate adopts the roller coating process, which is slightly inferior to the aluminum veneer in the variable performance of the color.
Curtain wall Custom Solid Aluminum Panel and honeycomb aluminum plate have their own advantages. Consumers should choose the right product according to the difference of their own construction environment, which is the rational consumption.
Techniques and methods for edge folding and grooving of Aluminum Composite Panel
Aluminum Composite Panel is widely used, most of the time have to fold, today as the old xingda aluminum workers xiaobian to explain how to better under the aluminum plate folding.
First of all, we all know that the premise of aluminum-plastic plate folding aluminum foil is thick enough, the thicker the aluminum skin, the better the frilled edge, before the aluminum-plastic plate folding, first we must from the back of aluminum-plastic plate with slot machine, trimming machine), open a groove, otherwise can't frilled edge, the depth of the slot is according to the thickness of the aluminous model to adjust, the tool bit shorter, first try, slowly until seemed dew aluminum skin not dew, deep cause ruffled fracture easily scratch the aluminum skin, light the bad side of easy to crack.
Solid Aluminum Panel Manufacturer, Custom Solid Aluminum Panel
The façade of a building plays an integral part in determining the visual uniqueness and durability of a building. The use of aluminium as the cladding material can create the colour, shape and sustainability of a building façade.
SEVEN SAP (Solid Aluminium Panel) can satisfy the desire of the most distinguished building designers. Pre-fabricated from aluminium sheet from 2.0mm to 6.0mm thick, Sevenbond SAP comes in either flat or with intricate in-fill design of your choice. For a lasting outstanding finish, PVDF lacquer paint is applied on the surface in our in-house spray coating line.SEVEN SAP can also be printed with UV ink for that special effect print. This is what many interior designers have been yearning to have and which we can now fulfil their wishes.
UNIQUE FEATURES OF SEVEN SAP:
Made to order , with a wide array of colour , shapes and in-fill designCorrosion and weather resistance as only high quality coating and aluminium alloy is used
Long service life and incombustible to fire.
UV printing for special effect for interior cladding
Environmental friendly as it is 100% recyclable
Specifications of SEVEN SAP
Thickness 2.0mm - 6.0mm
Alloy AA1100 or AA3003
Max Size 1500mm x 4000mm
Coating PVDF (PPG, Akzo Nobel, Nippon)
Combustability Incombustible (BS 476 part 4)
Solid Aluminum Panel in Double-Curve
Custom Solid Aluminum Panel, Solid Aluminum Panel, SAP For Exterior Decoration Projects
Application field: interior and exterior aluminum veneer decoration project of high grade business building, stadium, theater, school, airport, station, subway station, museum and so on.
1. light weight, good rigidity, weather ability and corrosion resistance, not easy to fade, good processing performance
2. strong stereo sense and vivid image can be machined into various geometric shapes, such as arc, surface and so on
3. construction site does not need to be cut, fixed on the skeleton. Low maintenance cost, long service life, environmental protection
Application field: interior and exterior aluminum veneer decoration project of high grade business building, stadium, theater, school, airport, station, subway station, museum and so on.
More information you can view here.
SEVEN AEP (Aluminum Expanded Panel)
Aluminum Expanded Panel Supplier, China Aluminum Expanded Panel Manufacturer,
Expanded metal has long been admired by architects and designers for its compelling aesthetics, as a result we have continued to provide a range of architectural patterns each as unique as the last. It has a diverse range of properties, which makes it so versatile and appealing for many for that unique architectural effect.
FEATURES & BENEFITS
RUST PROOF
Aluminium expanded metal does not rust.
EFFICIENT PROCESS
There is very little waste when manufacturing and processing
aluminium expanded panel.
ATTRACTIVE
Available in a wide array of colours and design.
COST-EFFECTIVE
A small quantity of metal can be stretched into a large piece.
ALLOWS CIRCULATION
Aluminium expanded panel allows air and light to move freely.
LIGHTWEIGHT
Aluminium expanded metal is a light weight material.
GENERAL PROPERTIES
Thickness (MM) 2.0, 2.5, 3.0
Standard Size (MM²) 1250 x 2400
Max. Width (MM) 2000
Max. Length (MM) 4000
Alloy AA 1060*
Coating PVDF Coating or Anodized
Unit Weight (KG/M²) for 2MM Panel 2.7
ItemAluminum punching panel
BrandQi.Alum.
MaterialAl1100 series,Al3003series
Thickess1.0mm,1.5mm,2.0mm,2.5mm,3.0mm
ColorAny colors from RAL or Pantone color chart
Dimension1000*2000mm,1500*3000mm,1200*2440mmm and other customized size
Metal processCutting,bending,welding,polishing,curving
Surface treatmentPowder coating,PEcoating,PVDF coating,wooden finish,stone finish
Coating materials brandInternational brand:Akzo Nobel,PPG,Jotun
National Brand:KOFLUX and KGE
DesignCustomized
Perforation10%~70% all is available
ApplicationExterior and interior wall,facade,curtain wall,cladding,hotel,and so on
Technical support please welcome mail us your drawings, we will offer you the professional solution.
Here are our contract way:
- High durability with aluminum surface coated with NANO technology - anti-dust and minimize water retention, as well as any impact of the environment.
- Thickness range from 2mm to 7mm
- Safe with fireproof material inside
- Flexible, high bending, and also ensure the hardness to meet the specific requirements of each project
- Rich in color, diversified in types of patterns with many types of wood, stone texture helps to replace natural materials.
- Easy to install and install under all conditions
We imported the technics to produce the aluminum mushroom growing shelf/shelves, and after several years of export, our aluminum mushroom shelves have been exported to Netherland, Ireland, UK, Poland, USA, Mexico, Canada, Australia, Japan, Thailand etc.
There are some features of our shelves:
Material: we use 6005 and 6063A aluminum alloy, which could give a high hardness: 6005 above HW14, and 6063A above HW12. This could give the whole shelves a better firmness and weight load. While the aluminum has a good Corrosion resistance.
Anodizing: we anodizing some parts of the shelves: legs, sideboard, endboards to make it have a better Corrosion resistance. Other parts could also be anodized as per you choice.
Load weight: the shelves could load at least 150kgs/M2
Aluminum composite panel is widely used in indoor or outdoor wall decoration. Foshan Beauty East Decoration Materials Co., Ltd. is a professional manufacturer of aluminum composite panel since 2001.
The standard size of aluminum composite panel is 1220*2440MM, other sizes can be customized. The panel thickness can be 3MM,3.5MM,4MM,4.5MM, 5MM. Aluminum thickness can be 0.18MM, 0.21MM, 0.25MM, 0.3MM, 0.35MM, 0.40MM, 0.45MM, 0.5MM. For outdoor usage, we may advice 3*0.21MM.
There are various colors that you can choose. Such as metallic color, glossy color, brushed color and so on.
Aluminum ceiling tile is widely used as wall decoration. Foshan Beauty East Decoration Materials Co., Ltd. is a professional manufacturer of aluminum composite panel since 2001. The size of aluminum ceiling tile can be 600*600MM, 300*300MM, 600*1200MM. The panel thickness can be 0.40MM, 0.5MM, 0.6MM, 0.7MM, 0.8MM, 0.9MM, 1.0MM. The color is usually in white, but we also have wooden color or other colors.
Skc-130 portable aluminum composite panel slotting machine
Features:
1. Skc-130 is used for slotting and cutting composited material, such as aluminum composite panel, aluminum sheet, wooden plate, etc.One machine, two functions.
2. Skc-130 acp grooving machine is small and light, convenient to work in factory or construction site.
3. Adopting germany motor, strong power, high efficiency slotted , it can slott thousands of square meters per day
4. Grooving depth can be adjusted, slotting precision less than 0.1mm
Aluminum composite panel production line
Stable technology
Easy operation and maintenance
Wide application
Ce certificat
The speed is depends on the thickness of acp.
This is the 5th type of vacuum exhaust production lines, which developed from our years of actual experience with the latest technology both in china and abroad. We have sold more than 400 lines over the world.
Performance of the line has reached the criterion of imported equipment, even exceeded in some parts. Characteristics of the line are one-time composition, easy operation, good stability, and good quality.
We are arab german foundation , one of the leading company for import & export aluminum composite panel since 1995 moreover we have been now the only agent in egyptian
Market of (alcomex & alcobond). Alcomex is an korean material . Alcobond is an american material which have different varieties .
They are used for designs and decoration works at banks , hospitals, administrative buildings , malls and go on ...
These our two brands was the highest quality and lowest price than any acp brand in egyptian .
Market with 20 year guarantee plus iso . Certificate that we have from our supplier .
As a light composite material consisting of two aluminium cover sheets (up to h19 aluminum) and an aluminum core, the versatile alumcanbond ® product is a material also preferred in areas other than architecture, such as image-building corporate design, and is widely used in industry and transportation.
Numerous international prizes have been awarded for this successful product. With more than 120 million sq.M of alumcanbond ® sold, it has proved to be one of the most successful materials world-wide.
