Hot Selling Aluminium Ingot A7 99.7% & A8 99.8% best Price Aluminium Ingot A7 99.7% And A8 99.8%. Once the aluminum scrap is collected and sorted, it is placed into a melting furnace and turned into molten aluminum at temperatures ranging from 1300 to 1400 degrees Fahrenheit. This molten aluminum cast into large slabs called ingots or billets. And since aluminum never loses its performance or strength during the recycling process, the same piece of aluminum can enter the secondary production process time and time again, multiplying the cost savings and environmental benefits. Not only does secondary aluminum production use less energy, it reduces landfill waste, contributes much lower greenhouse gas emissions and greatly reduces costly international transportation.
Top Quality Pure 99.9% Aluminium Ubc Scrap Beverage Can Scraps Aluminum can Scrap (UBC) - Aluminium Used Beverage Cans Scraps This is an aluminium cans scrap which is generated from beverage cans. The cans are free from dirts, dusts, water and oil. This is ongoing supply and we are capable of meeting your qauntity requirements. If you are interested in our product, Please write us with your email and phone number for more information, product pictures and fast reply. USED BEVERAGE CANS ALUMINIUM SCRAP FOR REMELTING.99,5% AVERAGE ALUMINIUM CONTENT. Bundles must be banded with a minimum of 16mm (width) x 0,80mm (thickness) Polyester straps. The integrity of the bundles must be as safe as they can be stacked for storage, and bundle height must not exceed 1.50 meter. UBC scrap Specification 1. Mainly used for melting ingot 2. Discontinuous melting with scrap 3. Easy control and operation 4. Fast melting 5. Energy saving This Scrap Aluminium is produced in the production of industrial waste. Such as: Scrap Aluminium Wire, Scrap Aluminium block and so on 6. It mainly used for drawing back non-ferrous metal typical material is: Wasted copper, aluminum, cable, aluminum stuff, wasted auto spare part, non-ferrous metal scrap, dross for printing, broken glass contains non-ferroous, electronic waste etc.
Top Quality Pure 99.9% Aluminium Ubc Scrap Beverage Can Scraps Aluminum can Scrap (UBC) - Aluminium Used Beverage Cans Scraps This is an aluminium cans scrap which is generated from beverage cans. The cans are free from dirts, dusts, water and oil. This is ongoing supply and we are capable of meeting your qauntity requirements. If you are interested in our product, Please write us with your email and phone number for more information, product pictures and fast reply. USED BEVERAGE CANS ALUMINIUM SCRAP FOR REMELTING.99,5% AVERAGE ALUMINIUM CONTENT. Bundles must be banded with a minimum of 16mm (width) x 0,80mm (thickness) Polyester straps. The integrity of the bundles must be as safe as they can be stacked for storage, and bundle height must not exceed 1.50 meter. UBC scrap Specification 1. Mainly used for melting ingot 2. Discontinuous melting with scrap 3. Easy control and operation 4. Fast melting 5. Energy saving This Scrap Aluminium is produced in the production of industrial waste. Such as: Scrap Aluminium Wire, Scrap Aluminium block and so on 6. It mainly used for drawing back non-ferrous metal typical material is: Wasted copper, aluminum, cable, aluminum stuff, wasted auto spare part, non-ferrous metal scrap, dross for printing, broken glass contains non-ferroous, electronic waste etc.
GerardJOSEPH llc is an American company specializing in international supply of Consumers goods. We are a family business that is delivering the highest quality of consumer goods to buyers all over the world. We own shares of companies through the USA that do the production for us. High quality of products are guaranteed thanks to careful, detailed and research. Thanks to the policy followed by the company, we are conceived in the market as a reliable, honest and business like partner, the one that guarantees the highest standard of products. Name: Aluminium Wheel Scrap Purity (%): 99.99 USA scrap origin
GerardJOSEPH llc is an American company specializing in international supply of Consumers goods. We are a family business that is delivering the highest quality of consumer goods to buyers all over the world. We own shares of companies through the USA that do the production for us. High quality of products are guaranteed thanks to careful, detailed and research. Thanks to the policy followed by the company, we are conceived in the market as a reliable, honest and business like partner, the one that guarantees the highest standard of products. Product name: Pure Aluminum Extrusion Scrap 6063 Series: 6063 Al Content (%): 99.9% Material: Alloy 6063 Color: Silver White Tensile strength: 145MPa
GerardJOSEPH llc is an American company specializing in international supply of Consumers goods. We are a family business that is delivering the highest quality of consumer goods to buyers all over the world. We own shares of companies through the USA that do the production for us. High quality of products are guaranteed thanks to careful, detailed and research. Thanks to the policy followed by the company, we are conceived in the market as a reliable, honest and business like partner, the one that guarantees the highest standard of products. Product name: Aluminum Ingot A00 A7 99.7% Series: A7 Al Content (%): 99.99% Material: Alloy Ingot Color: Silver White
We have Aluminum Tense Scrap in stock, we also have Aluminum Radiator scrap, Aluminum Wheel Scrap, Aluminum Extrusion and Aluminum Ingots Scrap. Contact us for more.
Factory cheap 99.99% purity bulk aluminum wire scrap for sale Key Specifications/Special Features: Aluminum Scrap Density: 2.702g/cm Melting point: 660.37'C Boiling point: 2467.0C Color: silver white ITEM VALUE RESULT(%) Al Margin 98.32%
ACP Sheet
Aluminium Pipe & Sheets
Introducing Type A-7 Aluminum: The Perfect Choice for Your Industrial Needs! Looking for high-quality aluminum ingots? Look no further! We proudly present Type A-7 ALUMINUM, the finest commodity with a purity and quality level of 99.70%. Sourced directly from Kazakhstan, our product guarantees excellence. With a flexible CIF delivery option to your chosen port, we ensure convenience and hassle-free transactions. Our prices are negotiable, catering to your unique requirements and budget. You can rely on our reliable and sustainable supply. We offer an annual sales contract, with a minimum order quantity of 1,000 metric tons. Plus, our production capacity ranges to 100,000 Metric Tons per month, ensuring we meet your demands promptly. Rest assured, quality is our priority. Payment is made easy with our convenient methods: SBLC; DLC or LC. All payments are made and discounted against SGS of the cargo. Don't miss this opportunity to partner with us! Contact us today to secure your supply of Type A-7 ALUMINUM and experience unmatched quality and service. Classification: Type A-7 ALUMINUM Commodity: Aluminum ingots Purity and Quality Level: 99.70% Terms of delivery: CIF, in the Port of Destination. Price: Negotiable. Place of production: Origin Kazakhstan. Duration of Contract: Contract for 1 years, renewable. Minimum amount: 1,000 metric tons Total / Contract Quantity: Annual sales contract, we have production capacity to 100,000 Metric Tons per month, we have mineral Reserves and stockpiles to meet scheduled deliveries annually. Inspection: Fresh SGS / port access during Laycan assignment SGS every 5.000mt for quality assurance. Insurance: TBD Payment Condition: FOB, at the port of shipment or departure. Payment method: SBLC, DL or LC. Delivery Documents: All Product Certificates, Lot Numbers, Fresh SGS, Delivery Schedule
1. Reasonable price and high purity 2. Puritys: 95% 99.7% Specification of Aluminum scrap 6063 Si: 0.2-0.6% Fe: 0.35% Cu: 0.1% Mn: 0.1% Mg: 0.45-0.9% Cr: 0.1% Zn: 0.1% Packaging Detail: 1.Compressed into rectangular block 2. 50kgs/bag, 1000kgs/bag 3.50kgs/bale, 50kgs/bundle 4. 20mt/20'fcl, 25mt/40'fcl
One of the largest integrated primary producer of aluminium in Asia. With a pan-Indian presence that encompasses the entire gamut of operations, from bauxite mining, alumina refining, aluminium smelting to downstream rolling, extrusions and recycling, Hindalco enjoys a leadership position in aluminium and downstream value-added products in India. Our Indian aluminium operations are integrated and consist of bauxite mining, alumina refining, smelting and converting primary metal into value-added products. We have dedicated sources for critical raw materials such as bauxite, power and coal. We also have committed supply sources for auxiliary chemicals. Our finished products include alumina, primary aluminium in the form of ingots, billets and wire rods, value-added products such as rolled products, extrusions and foils. Metallurgical alumina is used for our own captive needs. Chemical alumina and hydrates are used in range of industries including water treatment, fillers in cables and plastics, refractories and ceramics, glass among others. Our facilities are in regions close to raw material sources, low cost and available labour and demand markets. This helps in reducing costs and improving profit margins. The technology upgrade has resulted in higher utilisation rates at our plants and improved efficiency. We believe implementation of superior technology not only reduces costs but also provides superior and customised products, thus, improving our sales. Hindalcoâ??s integrated complex at Renukoot, in Uttar Pradesh, India, houses an alumina refinery, an aluminium smelter and facilities for the production of semi-fabricated products. Power is sourced from our Renusagar power plant, located about 45km from Renukoot. Our facilities also include an aluminium smelter and an aluminium FRP facility (for rolled products, extrusions products and wire rods) at Hirakud (Odisha) with a captive power plant and coal mine, and alumina refinery at Muri (Jharkhand). Our Chemical grade alumina plant is located at Belagavi (Karnataka), and rolling mills at Belur (West Bengal), Taloja near Mumbai and Mouda near Nagpur (Maharashtra). Foil rolling facility is situated at Mouda near Nagpur (Maharashtra) and our extrusion plant at Alupuram (Kerala). Hindalco's new age smelters at Aditya (Odisha) and Mahan (Madhya Pradesh), operating on state-of-the-art AP36 technology, have not only resulted in expansion of our capacities but also improved cost-efficiency of our operations. These smelters have their own captive power plants and source alumina from Utkal, our 100% subsidiary. Utkal Alumina (Odisha) is a world class refinery with one of the lowest cost structure in the world. The bauxite for Utkal is sourced from Baphlimali mines by a 18 kilometer long conveyor, one of its kind in the world.
Aluminium is used extensively in the transport industry due to its high strength to weight ratio and its excellent impact absorption qualities. Western countries use an average of 140kg of aluminium per vehicle, whereas it stands at 40kg per vehicle in India. Hindalco's high-quality aluminium is preferred for its superior alloy composition and metallurgical properties that meet stringent performance parameters. Our expertise is backed by the superior Wagstaff AirSlip casting technology. From brakes to ignition, transmission to suspension, cooling and exhaust systems to windows and structurals, ornamentals to accessories, automobile heat exchangers and registration plates, Hindalcoâ??s superior aluminium material is for making the most precise automobile components.
Products Name: Pure Aluminum A7 Ingot 99.9% Chemical Composition: Al Weight: 20/25kg Al (Min): 99%-99.9% Appearance: silvery white Aluminum ingot for remelting is produced by molten salt electrolysis method using alumina and cryolite. Products meet the national standard GB/T1196-2002. The surface of ingot is clean and smooth. Item: A7 Aluminum ingot 99.7 high quality Standard: GB/T 3190-2008 JIS H4040:2006 JIS H4001:2006 ASTM B221M:2006 ASTM B209M:2006 ISO 209:2007(E) EN 573-3:2003 etc. Material: 1000 Series Size: Thickness:0.1-200mm,or as requiredWidth:0.1-2000mm,or as required Size can be customized according to customer needs Surface Bright, polished, hair line, brush, sand blast, checkered, embossed, etching, etc. Application: mainly used for melting ingot; discontinuous melting with scrap; easy control and operation; fast melting; Used for industry such as automobile, pinning and weaving, electron broadly and so on . Export to: Worldwide etc. Package Standard airworthy export packaging: wooden pallets with plastic protection or according to customer requirements Packaging Details: Packing 25KG/INGOT, 1000KG or 1050KG/bundle, or as your requirement AL Fe Si Cu Ga Mg Zn others Total 99.9 0.07 0.05 0.005 0.02 0.01 0.025 0.016 0.01 99.85 0.12 0.08 0.005 0.03 0.02 0.03 0.015 0.15 99.7 0.2 0.1 0.01 0.03 0.02 0.03 0.03 0.3 99.7 0.2 0.12 0.01 0.03 0.03 0.03 0.03 0.3 99.6 0.25 0.16 0.01 0.03 0.02 0.03 0.03 0.49 99.5 0.3 0.22 0.02 0.03 0.05 0.05 0.03 0.5 99 0.5 0.42 0.02 0.05 0.05 0.05 0.05 1
Dear buyer, Thanks for the interest in our quality Aluminium Ingots 99.97% We can supply you on a consistent basis. ORIGIN: EUROPE LOADING PORT: MONTHLY & TRIAL ORDER: 5000 TONS -10,000 TONS PACKAGING: BULK INCOTERM: CIF DESTINATION PORT:AWSP TRANS-SHIPMENT IS ALLOWED INSPECTION:BY SGS ATH THE SELLER\'S EXPENSE AT PORT OF LOADING. CIF RATE: LME rate Minus 15( fifteen percent) PAYMENT TERM: IRREVOCABLE CONFIRMED & TRANSFERABLE LETTER OF CREDIT ISSUED UNDER MT700 *** We do not offer 2% performance bond because we are sole responsible for the product delivery to your destination port and ONLY then is the payment release. If you require a 2% PB, you will have to make a deposit payment of 5% of the shipment,and 95% payment will be be at destination port. Kindly issue an ICPO + CIS + POF
Introducing our high-quality A7 Aluminum Ingots, sourced directly from South Africa, ideal for various industrial applications. With a purity level of 99.7%, our aluminum ingots meet the highest standards for manufacturing and construction needs. Produced through advanced manufacturing processes, these ingots ensure excellent performance, durability, and consistency, meeting the stringent requirements of the global market.
- Commodity: Aluminium Taint Tabor Scrap 2% attachment - Quantity: 150 MT monthly - Payment terms: 100% irrevocable LC at sight or T.T - POL: Asia ports (Vietnam, Indonesia, etc.) - Looking for genuine buyer from Asia - Welcome to visit� our� office
- Commodity: Remelted Aluminium Ingot 80-98% - FTA: Included - Quantity: 350 MT monthly - Payment terms: 100% irrevocable LC at sight or T.T - POL: Asia ports (Vietnam, Indonesia, etc.) - Looking for genuine buyer from Asia
- Commodity: Aluminium Alloy Ingot ADC12 Standard/ Near Standard/ Offgrade - FTA: Included - Quantity: 350 MT monthly - Payment terms: 100% irrevocable LC at sight or T.T - POL: Asia ports (Vietnam, Indonesia, etc.) - Looking for genuine buyer from Asia - Welcome to visit our office
