We, Seller xxxxxxxxxxxxxxxxxxxxxxxx, as the Seller, State and Represent withfull legal and corporate responsibility that we are ready, willing and able tosupply the following commodity as per specification and quantity and forthe price and terms of payment as specified in the terms and condition asstatic below as agreed between the Seller and the
buyer and issue in thisSoft Corporate Offer as follows:
2. Quantity: 50000 MT to be delivered in one lot or in any sub-lots asagreed between the Buyer and the Seller to complete 50000 MT.
3. Annual Quantity: as decided between the Buyer and the Seller from time to time.
4. Packaging: Palletized, Aluminum bands.
5. Amount to Pay for the 50000 MT X 1500USD
6. Amount to Pay per Annum: to be decided by both Buyer and Seller.
7. Specifications: Grade A Aluminum A7 Ingot 99.97% Purity given below.
8. Delivery Size & Schedule: 600000 MT to be delivered in different monthsas agreed between the Buyer and the Seller at prices given in this FCO.
9. Terms of delivery: CIF INCOTERMS 2010.
10. Payment Terms: 100% irrevocable, SBLC(MT760). (Buyer's bank within top 50 prime banks list
11. This has to be 7 days max after signing the contract
12. USD 1500 per Metric Ton
13. Commission: Included
14. Delivery: CIF
14. Shipment: the loading starts after receiving the 100% SBLC irrevocable, Confirmed and from 50 premium Banks by the Bank of the Seller.
15. inspection: inspected by International Inspection by SGS at the
Seller's Expense in the port of loading.
16. Specifications:
Al % Si % Cu % Mg % Fe % Mg % Zn % Ga % Others Others total
99.7 0.10 0.010 0.020 0.20 0.02 0.030 0.03 0.03 0.30
17. Shipment documents: Seller will provide the following shipment documents:
A. Export Permit;
B. Certificate of ownership; C.
Certificate of origin;
D.Packing List Certificate;
E. Bill of Lading;
F. Proforma invoice;
G. Three original commercial invoices to Buyer; H.
Packing list Certificate;
I. SGS inspection Certificate;
Country Of Origin: China
Port of loading: Tianjin, China
Goods Descriptions & Specification: Aluminum A7, ingot (99,7 Al %),
UNIT PRICE (for trial order; the price for next orders will be determined each month):
FOB Tianjin port, China: 1900 USD
PAYMENT TERM: 100% L/C (Irrevocable, Transferable/Non-Transferrable, Divisible,
Confirmed Letter of Credit) - releasing of a letter of credit and payment under L/C in favor of the
Seller at the loading port (Tianjin, China) under the contract shall be made against submission of the
bill of lading and upon SGS (or similar reliable company) inspection for quantity and quality.
Aluminum A7
From Russian Federadion, the volume - 20/30 thousand tons LME-160 $.
The volume can be taken at once and in the batches.
Primary aluminium with impurities no greater than the chemical composition of one of the registered designations.
We can supply LME registered Aluminum Ingots A7. Origin Russia.
SPECIFICATIONS: Al-purity is 99.70 %.
PACKING: palletized banded by Aluminum bands.
PACKAGE: packed with Aluminum band in bundles.
NET WEIGHT OF EACH BUNDLE: 1000-1200 kg (+/-1%)
MINIMUM WEIGHT IN EACH CONTAINER: 25 MT approximately.
GROSS WEIGHT OF EACH CONTAINER: 25.2 MT approximately
We have a Brazilian mine/manufacturer offering A7 - 99.7% purity level ingots, SGS or equivalent inspection at port of loading at Seller expense. CIF ASWP. 10,000 MT x 12 months contract required upto 50,000 MT per month. Non Transferable, irrevocable DLC for full order value, with payment release against shipping documents. Revolving DLC considered. 1st shipment within 45 days from receipt of DLC, all other shipments 30 days thereafter. CIF PRICE USD $1860 PER MT as of Oct 21.
Product Description -
Base Aluminum P1020, Purity% 99,97 until 99,99%
Price of product (USD) -
"Russian Aluminum ingots:
Annual contracts for quantities
100,000 tons at a price of $ 1,590 per tonne cif
3000 tons at $ 1900 cif.
Saudi Aluminum ingots:
5 thousand tons at $ 1,866 per ton, cif price.
Large quantities are priced at $ 1733.
The higher the quantity, the lower the price.
Seller requires solvency with the loi letter. "
Product origin -
Russian / Saudi ingots aluminum
Key Specifications/Special Features -
Base Aluminum p1020, Purity% 99,97 until 99,99%
Minimum Order Size and Packaging details -
"Russian Aluminum ingots:
Minimum order quantity is 3000 tons
Saudi Aluminum ingots:
Minimum quantity of 5 thousand tons"
Aluminum ingot for remelting is produced by molten salt electrolysis method using alumina and cryolite. Products meet the national standard GB/T1196-2002. The surface of ingot is clean and smooth.
Introduction
Aluminum is a silver-white metal that ranks third in the earth's crust after oxygen and silicon.Aluminum is less dense, only 34.61% of iron and 30.33% of copper, so it is also called light metal.Aluminum is the world's output and usage are second only to steel non-ferrous metals.The density of aluminium is only 2.7103g/cm3, about a third of that of steel, copper or brass.Because of its light weight, aluminum is often used in the manufacture of vehicles, trains, subways, ships, airplanes, rockets, airships and other land, sea and air vehicles to reduce the dead weight and increase the loading capacity.
In our daily industrial raw materials called aluminum ingots, according to the national standard (GB/T 1196-2008) should be called "remelting with aluminum ingots", but we are used to "aluminum ingots".It is produced by electrolysis with alumina - cryolite.There are two kinds of aluminum ingots after they enter into industrial application: cast aluminum alloy and deformed aluminum alloy.Casting aluminum and aluminum alloys are castings of aluminum produced by casting method;Deformable aluminium and aluminium alloys are manufactured by means of pressure processing: plates, belts, foils, tubes, rods, moulds, wires and forgings.According to the national standard, "aluminum ingots for remelting are divided into 8 grades according to chemical composition, namely Al99.90, Al99.85, Al99.70, Al99.60, Al99.50, Al99.00, al99.7e, al99.6e" (note: the number after Al is the aluminum content).
Aluminum ingot for remelting is produced by molten salt electrolysis method using alumina and cryolite. Products meet the national standard GB/T1196-2002. The surface of ingot is clean and smooth.
Introduction
Aluminum is a silver-white metal that ranks third in the earth's crust after oxygen and silicon.Aluminum is less dense, only 34.61% of iron and 30.33% of copper, so it is also called light metal.Aluminum is the world's output and usage are second only to steel non-ferrous metals.The density of aluminium is only 2.7103g/cm3, about a third of that of steel, copper or brass.Because of its light weight, aluminum is often used in the manufacture of vehicles, trains, subways, ships, airplanes, rockets, airships and other land, sea and air vehicles to reduce the dead weight and increase the loading capacity.
In our daily industrial raw materials called aluminum ingots, according to the national standard (GB/T 1196-2008) should be called "remelting with aluminum ingots", but we are used to "aluminum ingots".It is produced by electrolysis with alumina - cryolite.There are two kinds of aluminum ingots after they enter into industrial application: cast aluminum alloy and deformed aluminum alloy.Casting aluminum and aluminum alloys are castings of aluminum produced by casting method;Deformable aluminium and aluminium alloys are manufactured by means of pressure processing: plates, belts, foils, tubes, rods, moulds, wires and forgings.According to the national standard, "aluminum ingots for remelting are divided into 8 grades according to chemical composition, namely Al99.90, Al99.85, Al99.70, Al99.60, Al99.50, Al99.00, al99.7e, al99.6e" (note: the number after Al is the aluminum content).
Our company produces aluminum ingots by processing used aluminum materials, such as beverage cans, used aluminum foil, medicine and food wrappers, aluminum machining scraps, etc.
We sell according to what is like the sample to be sent. We cannot confirm the exact composition because we produce from recycled raw materials, but our product prices are much cheaper than our competitors. The aluminum we produce is indeed suitable for use as raw material for the aluminum industry, for reprocessing.
Product Details
Chemical Composition: Al
Weight: 20/25kg
Al (Min): 99.7%-99.9%
Place of Origin: China
Appearance: silvery white
Aluminum ingot for remelting is produced by molten salt electrolysis method using alumina and cryolite. Products meet the national standard GB/T1196-2002. The surface of ingot is clean and smooth.
1. mainly used for melting ingot
2. discontinuous melting with scrap
3. easy control and operation
4. fast melting
5. Used for industry such as automobile,pinning and weaving,electron broadly and so on
The main models are as follows: AL99.90, AL99.85, AL99.70A, AL99.70, AL99.60, AL99.50, AL99.00.
Free samples below 1 kg are provided. For specific operation, please contact us
1.)Alloy:1070
 2 Temper: HO
3. Thickness: 2mm-40mm
4. Diameters:6mm-500mm
5. Package: Nylon bags or Cartons
The slugs are widely used for the manufacturing of electrolytic capacitors, aluminum containers or Collapsible Aluminium tubes for cosmetics, pharmaceutical, beverage containers, and many other packaging solutions.
CHONGQING EXCEED METAL CO.,LTD supplies aluminium discs in a wide variety of sizes and alloys. Two state-of-the-art disc blanking presses combined with open throat shear processing enable our facilities to supply a diverse range of markets.
1.)Alloy: 1100,1050,1060, 1070, 1200, 3003, 3004, 3105, 5052, 6061, 8011
2.) Temper:Â HO H12 H14 H16 H18 H22 H24 H26 H32 T6
3.)� Thickness: 0.3mm  6.0mm
4. Diameters : 80mm - 1100mm
5.) Package:Â wooden pallet, wooden case
Aluminium discs are specialized products that are mostly used in the production of cookwares, utensils, traffic signals, lighting lampshade, stock pots, kettles etc. Our metallurgical processes ensure availability of deep drawing and spinning quality specifications that match these demanding applications.
