Aluminum A7 From Russian Federadion, the volume - 20/30 thousand tons LME-160 $. The volume can be taken at once and in the batches. Primary aluminium with impurities no greater than the chemical composition of one of the registered designations.
We can supply LME registered Aluminum Ingots A7. Origin Russia. SPECIFICATIONS: Al-purity is 99.70 %. PACKING: palletized banded by Aluminum bands. PACKAGE: packed with Aluminum band in bundles. NET WEIGHT OF EACH BUNDLE: 1000-1200 kg (+/-1%) MINIMUM WEIGHT IN EACH CONTAINER: 25 MT approximately. GROSS WEIGHT OF EACH CONTAINER: 25.2 MT approximately
Aluminum ingot for remelting is produced by molten salt electrolysis method using alumina and cryolite. Products meet the national standard GB/T1196-2002. The surface of ingot is clean and smooth. Introduction Aluminum is a silver-white metal that ranks third in the earth's crust after oxygen and silicon.Aluminum is less dense, only 34.61% of iron and 30.33% of copper, so it is also called light metal.Aluminum is the world's output and usage are second only to steel non-ferrous metals.The density of aluminium is only 2.7103g/cm3, about a third of that of steel, copper or brass.Because of its light weight, aluminum is often used in the manufacture of vehicles, trains, subways, ships, airplanes, rockets, airships and other land, sea and air vehicles to reduce the dead weight and increase the loading capacity. In our daily industrial raw materials called aluminum ingots, according to the national standard (GB/T 1196-2008) should be called "remelting with aluminum ingots", but we are used to "aluminum ingots".It is produced by electrolysis with alumina - cryolite.There are two kinds of aluminum ingots after they enter into industrial application: cast aluminum alloy and deformed aluminum alloy.Casting aluminum and aluminum alloys are castings of aluminum produced by casting method;Deformable aluminium and aluminium alloys are manufactured by means of pressure processing: plates, belts, foils, tubes, rods, moulds, wires and forgings.According to the national standard, "aluminum ingots for remelting are divided into 8 grades according to chemical composition, namely Al99.90, Al99.85, Al99.70, Al99.60, Al99.50, Al99.00, al99.7e, al99.6e" (note: the number after Al is the aluminum content).
Aluminum ingot for remelting is produced by molten salt electrolysis method using alumina and cryolite. Products meet the national standard GB/T1196-2002. The surface of ingot is clean and smooth. Introduction Aluminum is a silver-white metal that ranks third in the earth's crust after oxygen and silicon.Aluminum is less dense, only 34.61% of iron and 30.33% of copper, so it is also called light metal.Aluminum is the world's output and usage are second only to steel non-ferrous metals.The density of aluminium is only 2.7103g/cm3, about a third of that of steel, copper or brass.Because of its light weight, aluminum is often used in the manufacture of vehicles, trains, subways, ships, airplanes, rockets, airships and other land, sea and air vehicles to reduce the dead weight and increase the loading capacity. In our daily industrial raw materials called aluminum ingots, according to the national standard (GB/T 1196-2008) should be called "remelting with aluminum ingots", but we are used to "aluminum ingots".It is produced by electrolysis with alumina - cryolite.There are two kinds of aluminum ingots after they enter into industrial application: cast aluminum alloy and deformed aluminum alloy.Casting aluminum and aluminum alloys are castings of aluminum produced by casting method;Deformable aluminium and aluminium alloys are manufactured by means of pressure processing: plates, belts, foils, tubes, rods, moulds, wires and forgings.According to the national standard, "aluminum ingots for remelting are divided into 8 grades according to chemical composition, namely Al99.90, Al99.85, Al99.70, Al99.60, Al99.50, Al99.00, al99.7e, al99.6e" (note: the number after Al is the aluminum content).
Our company produces aluminum ingots by processing used aluminum materials, such as beverage cans, used aluminum foil, medicine and food wrappers, aluminum machining scraps, etc. We sell according to what is like the sample to be sent. We cannot confirm the exact composition because we produce from recycled raw materials, but our product prices are much cheaper than our competitors. The aluminum we produce is indeed suitable for use as raw material for the aluminum industry, for reprocessing.
Aluminum Ingost for export, origin from Thailand.
We are international trading company We are supplyer of adc12 ingots Orgin jordan  and India Whit high quality bets price and 100% lc CIF terms soo pls for more details WHATSAPP.
We are one of the leading wholesale Aluminium Ingots manufacturers and suppliers. Our Aluminium Ingots are produced through a smelting process in which various shapes of ingots are produced, used in a wide range of industries. Aluminum Ingots processed further for utilization in automotive industry, household appliances and lightning. We value suggestions from our customers and accordingly we improvise our products to suit the requirements of our clients. Color : Metallic Surface Finishing : Polished Weight : 1-100kg Condition : New Purity : 99.99% Size : 20x3inch
Antimony ingot, commonly known as refined antimony. Use ANTIMONY INGOT supplier is mainly used as the hardener of alloy for metallurgy, storage battery and military industry, as well as the raw material for producing antimony oxide. Antimony ingot is also used in movable type printing industry, lead material, cable sheath, solder and sliding bearing. Antimony products are primarily refined antimony and antimony compounds, namely antimony trioxide, etc.The primary role of antimony in alloys is to add hardness, often referred to as metal or alloy hardener.Antimony and antimony compounds are used in wear - resistant alloys, printing type alloys and ordnance industries.With the development of science and technology, antimony is now widely used in the production of a variety of flame retardants, enamel, glass, rubber, paint, pigment, ceramics, plastics, semiconductor components, fireworks, medicine and chemical industry and other occupations.� Reserves and distribution Refined Antimony content in the earth's crust is 0.0001%, and according to 2014 data from the U.S. geological survey, global antimony reserves are about 1.8 million tons.There are as many as 120 antimony minerals known, but only 10 antimony minerals with industrial value and containing more than 20% antimony are known.
Use of ALUMINUM ALLOY INGOT All kinds of aircraft use aluminum alloy as the main structural material.The skins, beams, ribs, trusses, compartments and landing gear of aircraft can all be made of aluminum.The amount of aluminum used in an aircraft varies, depending on its purpose.The aluminum alloy used in Boeing 767 passenger plane accounts for about 81% of the body structure weight.For example, the f-15 high performance fighter with a maximum flight speed of Mach 2.5 only USES 35.5% aluminum alloy.Some aluminum alloys have good low temperature performance, at -183 ~ -253[2oc] is not cold and brittle, can work in liquid hydrogen and liquid oxygen environment, it does not react with concentrated nitric acid and partial dimethylhydrazine, has good welding performance, therefore it is a good material for making liquid rockets.The fuel tanks, oxidizer tanks, intertank, interstage, tail and instrument compartments of the Saturn 5 launch vehicle that launched the Apollo spacecraft were all made of ALUMINUM ALLOY INGOT. The crew compartment, forward fuselage, middle fuselage, aft fuselage, vertical tail, flaps, elevons, and horizontal tail are all made of aluminum.The main structural material of various man-made earth satellites and space probes is also aluminum.
Use of ALUMINUM ALLOY INGOT All kinds of aircraft use aluminum alloy as the main structural material.The skins, beams, ribs, trusses, compartments and landing gear of aircraft can all be made of aluminum.The amount of aluminum used in an aircraft varies, depending on its purpose.The aluminum alloy used in Boeing 767 passenger plane accounts for about 81% of the body structure weight.For example, the f-15 high performance fighter with a maximum flight speed of Mach 2.5 only USES 35.5% aluminum alloy.Some aluminum alloys have good low temperature performance, at -183 ~ -253[2oc] is not cold and brittle, can work in liquid hydrogen and liquid oxygen environment, it does not react with concentrated nitric acid and partial dimethylhydrazine, has good welding performance, therefore it is a good material for making liquid rockets.The fuel tanks, oxidizer tanks, intertank, interstage, tail and instrument compartments of the Saturn 5 launch vehicle that launched the Apollo spacecraft were all made of ALUMINUM ALLOY INGOT. The crew compartment, forward fuselage, middle fuselage, aft fuselage, vertical tail, flaps, elevons, and horizontal tail are all made of aluminum.The main structural material of various man-made earth satellites and space probes is also aluminum.
Aluminum Ingot A7 - Cif Price UNDER CONSULT Seller And Product From Brazil, India, Mexico Sblc Non-transferable From Top Prime Bank, Payable At Loading Port Seller Issues Pb2% Moq 1,000mt
Aluminium Eyelets With High Finished Product. High-quality durable material Lightweight, practical, versatile, simple operation, easy to carry Perfect for crafts, costume design, kids clothing, boutique accessories, costume decorating etc Colour: Silver, Size - Height - 6.5 mm, ID - 6 mm, OD - 6.5 mm All Tolerance - 0.2mm
Aluminum Ingots 97% with specifications : FE from ( 0.9 to 0.5) %
ALUMINUM CLOTHESLINE - 3 DESINGS: - 9-string traditional clothesline./ - 14-string double clothesline. / - 6-string balcony clothesline. *** The price can be negotiable, depending on the quantity *** The price starts at $38,10 *IMPORTANT: Product made and shipped from Brazil.
Our company mainly manufactures aluminium ingots. We could also customize as per special request from client. You can contact me:
Grade:1000 Series, 1000 Series Alloy Or Not:Non-alloy Secondary Or Not:Non-secondary Chemical Composition:Si,Cu,Mg,Fe..., 91% - 98% Al (Min):91% - 98% Place of Origin:CN Brand Name:Jinzhong Model Number:Pure aluminum ingots Product name:Aluminum ingot Delivery port:Tianjin Port Color:Silver Gray Package:Pallets Supply Ability:800 Ton/Tons per Day
Grade:1000 Series, 1000 Series Alloy Or Not:Non-alloy Secondary Or Not:Non-secondary Chemical Composition:Si,Cu,Mg,Fe..., 91% - 98% Al (Min):91% - 98% Place of Origin:CN Brand Name:Jinzhong Model Number:Pure aluminum ingots Product name:Aluminum ingot Delivery port:Tianjin Port Color:Silver Gray Package:Pallets Supply Ability:800 Ton/Tons per Day
Grade:1000 Series, 1000 Series Alloy Or Not:Non-alloy Secondary Or Not:Non-secondary Chemical Composition:Si,Cu,Mg,Fe..., 91% - 98% Al (Min):91% - 98% Place of Origin:CN Brand Name:Jinzhong Model Number:Pure aluminum ingots Product name:Aluminum ingot Delivery port:Tianjin Port Color:Silver Gray Package:Pallets Supply Ability:800 Ton/Tons per Day
Product name: aluminum silicon alloy ingot Place of origin: China Application: refine grain Shape: ingot Chemical Composition:AlSi20 AlSi30 AlSi35 AlSi50 AlSi30A AlSi35A Color: Grey/Sliver Packing:standard export packing Purity: high purity Supply Ability: 100 Ton/Tons per Month Port of shipment:Xiamen.China Lead Time :20days
