5A06 H28 Angle aluminum belongs to the Al-Mg series alloy, which has a wide range of applications, especially the construction industry is inseparable from this alloy, and is the most promising alloy. Good corrosion resistance, excellent weldability, good cold workability, and medium strength.
AL-MG series alloy is the most widely used anti-rust aluminum. This alloy has high strength, especially fatigue resistance: high plasticity and corrosion resistance, and cannot be strengthened by heat treatment. Plasticity in semi-cold work hardening Still good, low plasticity during cold work hardening, good corrosion resistance, good weldability, poor machinability, and can be polished. Mainly used for low-load parts that require high plasticity and good weldability, working in liquid or gaseous media, such as fuel tanks, gasoline or lubricating oil conduits, various liquid containers and other small-load parts made by deep drawing: The wire is used to make rivets.
Alloy grade
Silicon Si
Iron Fe
Copper Cu
Manganese Mn
Magnesium Mg
Chromium Cr
Zinc Zn
Titanium Ti
Zirconium Zr
other
Aluminum AL
new grade
old grade
0.40
0.40
0.10
0.5-0.8
5.8-6.8
0.20
0.02-0.10
each total
5A06
LF6
0.05
0.15
margi
5A06 H28 Angle aluminum belongs to the Al-Mg series alloy, which has a wide range of applications, especially the construction industry is inseparable from this alloy, and is the most promising alloy. Good corrosion resistance, excellent weldability, good cold workability, and medium strength.
AL-MG series alloy is the most widely used anti-rust aluminum. This alloy has high strength, especially fatigue resistance: high plasticity and corrosion resistance, and cannot be strengthened by heat treatment. Plasticity in semi-cold work hardening Still good, low plasticity during cold work hardening, good corrosion resistance, good weldability, poor machinability, and can be polished. Mainly used for low-load parts that require high plasticity and good weldability, working in liquid or gaseous media, such as fuel tanks, gasoline or lubricating oil conduits, various liquid containers and other small-load parts made by deep drawing: The wire is used to make rivets.
Alloy grade
Silicon Si
Iron Fe
Copper Cu
Manganese Mn
Magnesium Mg
Chromium Cr
Zinc Zn
Titanium Ti
Zirconium Zr
other
Aluminum AL
new grade
old grade
0.40
0.40
0.10
0.5-0.8
5.8-6.8
0.20
0.02-0.10
each
total
5A06
LF6
0.05
0.15
margi
3168 Aluminum Hardwares Suppliers
Short on time? Let Aluminum Hardwares sellers contact you.
Aluminum H-shaped steel is one of the most widely used non-ferrous structural materials in industry. It has been widely used in aviation, aerospace, automobile, machinery manufacturing, shipbuilding and chemical industry. With the rapid development of science and technology and industrial economy in recent years, the demand for aluminum tube and aluminum tube is increasing day by day. The production process of aluminum tube generally adopts the production process of ingot heating - extrusion - finishing. For aluminum alloy materials that can be strengthened by heat treatment, quenching and aging treatment should also be carried out. Hard alloy and high magnesium aluminum alloy pipes generally adopt the production process of cold rolling extruded tube billet first, and then stretching out finished products.
Parameter
Product Name
Aluminum H-shaped steel
Price range
$1000-$2000 Discounts are available for large orders
Minimum order quantity
1 ton
Specifications
Thickness 1-50mm, External diameter3-900mm,or according to requirements
We are a leading supplier of electroplating chemicals, industrial polishing and welding consumables, water treatment, powder coating, fertilizers. We stock and carry an extensive range of ready to use chemicals. We deal with so many different chemicals and we would like you to contact us for more information about our different chemicals and products.
Product:Aluminium
Brand:Renaissance Pipe Fitting Inc.
Sizes:Refer the specification
Condition:New
Rating:4.4, based on 65 reviews
price:Start from 20 USD
RFP India is India's leading manufacturer of aluminium, which are made from high standard quality hot rolled bars or plates. Our production proficiency comprises an absolute variety of aluminium butt weld fittings, aluminium pipe bends and aluminium seamless extruded pipes in accord with ANSI/ASME and DIN standards. At RFP, aluminium products are made up from rolled aluminium bars and plates, and not from cast aluminium, making it most appropriate for special applications. Aluminium is often supplied devoid of any surface treatment, for the reason that the aluminium oxide layer formed on the surface of it shows
RFP India is India's leading manufacturer of aluminium, which are made from high standard quality hot rolled bars or plates. Our production proficiency comprises an absolute variety of aluminium butt weld fittings, aluminium pipe bends and aluminium seamless extruded pipes in accord with ANSI/ASME and DIN standards. At RFP, aluminium products are made up from rolled aluminium bars and plates, and not from cast aluminium, making it most appropriate for special applications. Aluminium is often supplied devoid of any surface treatment, for the reason that the aluminium oxide layer formed on the surface of it shows enough resistance to corrosion in usual atmosphere. Meanwhile, Aluminium elbows and bends are in general made up from 6000 series aluminium pipes that meet the needs for strength, anodizing and welding.
With our expertise and trustworthiness, we are engaged in offering an optimum quality range of Aluminum Forgings Part. We Manufacture Customised Aluminum Forgings.
Material Aluminium
Usage / Application Industrial, Automotive and Defence
Brand Elpar
Thickness 10 mm to 100mm
Country of Origin Made in India
Packaging Type Box
Item code 140571738
Production Capacity 20000
Delivery Time 30 Days
Our range of Aluminum Fasteners is manufactured using high grades of Aluminum which provides strong resistance to corrosion. Further, the use of Aluminum as MOC also ensures excellent formability of most aluminum material parts that makes producing of the product even in complex specifications also easy.
We provide Standard and High-Quality Brass and MS (Mild Steel) Fastener with variety of types. Generally, Fasteners are hardware components that mechanically joins two or more elements together. Brass and MS Fasteners are easily removable without any damages the joining components. They are made from brass, mild steel and other material composition. Brass and MS Fasteners are defined various types such as Screw, Washer, Anchor, Nuts, Rivets, Inserts, Bolts and many more. Brass and MS fasteners are widely used in various industrial sectors including Electrical, Mechanical, Construction, Automotive, Automobile, Oil and Gas, Petrochemical and more. Brass and MS Fasteners are widely available in different size, shapes, grades, configuration and specification. We provide Fasteners as per DIN, ANSI, JIS, GB, GOST and other international standards. We customise size and dimension as per customer's requirements and specification.
Kindly note that we Supply and Manufacture items in all kinds of Aluminium Material's Extrusion Profiles 6063 and its accessories such as Fastening Elements (Pre-set Nut, T Bolt), Hole reducer bolt, Anti-torsion Subsequent Nut, Subsequent Nut, Connecting elements, Dia cast Bracket.
In another part we supply and Manufacture all kinds of ABS pipes and their Fittings such as T Clamps, L Clamps, Nuts, End Caps, Etc,,.
Application of our products are Workstation and Benches, Display Units, Machine Guarding, Machine Frames, Safety Fencing. We are supporting the Industries that are Manufacturing Industries, Electronics Manufacturing Industries, Medical Equipment, Pharmaceutical, Rubber and Plastics, Packing, Chemical and Allied Products, Semiconductor, Etc,.
We are Specialists to Manufacture Items as per Drawing. Presently we are supplying material to leading Indian and Foreign companies.
We look forward to having the Opportunity to hopefully work with you. If you have any query then please feel free to contact us.
CNC Aluminum Cutting Machine� LJ2AS-500*4200
1. The imported digital control system ensures the precise cutting size
2. The imported ball screw rod drives the machine to move horizontally with precise repeat orientation.
3. You can set a series of data to realize the continuous cutting according to the preset programme.
4. Adopt imported carbide saw blade and cutting feed motion guide rail is imported linear guide rail pair.
5. The blade feed is powered by the hydraulic damping cylinder.
6. Wide cutting range max length up to 4200mm three cutting angle 90/45.
Our steel roofing tiles are creative, strong and versatile in function. Radi Chinar Super Gold and Radi are our flagship brands in steel roofing tiles segment. Radiant roofing tiles are the perfect blend of tradition with technology. they are made with advance modern technology and raw material made by international standards and yet do not sacrifice the traditional look of the roof .Our roofing tiles have design benefits and are tested for hard weather conditions
Various kind of aluminum profile.
1. one-stop service, inlcuding extruding, machining, surface treating and assemblying as well.
2. ISO 9001 & IATF16949 certificate
3168 Aluminum Hardwares Suppliers
Short on time? Let Aluminum Hardwares sellers contact you.
