Find Verified Scientific Instruments Suppliers, Manufacturers and Wholesalers

Swift MFL portable instrument with a large, premium-quality multi-touch display. Incl.2 batt., power supp., manual, rugged case.

Highlights :

Fast, reliable corrosion screening even in service
Portable, battery-operated, sealed, large bright display
Simple to learn and operate, offers a high PoD

SPECS :

Acquisition modes Internal Clk, Encoder
Array connectors 1x IPEX
Batteries - typical life 6-8 hours
Cooling Sealed with internal fan
Data storage SSD, 100 GB
Display resolution 1024 768
Display size 26.4 cm (10.4)
Display type Capacitive multi-touch, with 3 mm (1/8 in), chemically strengthened glass cover. Non-reflective (AR coating), anti-fingerprint (oleophobic coating), optically bonded LCD and touchscreen. Passive backlight enhancement
Full recordable data for mapping Yes
High temperature inspections Yes
Highly portable easy to use system Yes
Multitouch control Yes
Nb. of input channels 8
Nb. of receiving elements Up to 128
Paperless Reporting Yes
Precision active steering No
Probability of detection 2mm diameter 20% loss
Probe type MFL
Rapid Coverage Yes
Rope access applications Yes
Setup creation/management Yes
Umbilical length 5m, 10m and 15m
Acquisition rate Up to 50 kHz
Automatic screenshot with defect entry Yes
Batteries - type 2x li-ion, rechargeable, DOT compliant
Compliance EN 61010-1, CE, WEEE, FCC, Part 15B, ICES-003, RoHS
Defect table (for reporting) Yes
Digitizing 16-bit resolution
Encoders and I/O connectors 1x 12-pin Fischer
Inspection workflows Optimized, with hard buttons
MFL receiver gain 23 - 64 dB
Programmable alarms Yes
Recordable UT data sets Yes
RFT/NFT/MFL connector Yes
Harness available Yes
Full screen mode Yes
Connectivity Gigabit Ethernet, Wi-Fi, HDMI, USB 2.0 (x3)
Dimensions (W x D x H) 355 288 127 mm (14.0 11.3 5.0 in)
Encoder inputs 3-axis Quadrature / Step /Dir, TTL 5V
IP rating IP65
Operating humidity 95%, non-condensing
Operating temperature 0 C to 40 C (32 F to 104 F)
Power supply/requirements Battery Operated
Programmable outputs Yes
Supported Technologies/Techniques MFL
Storage temperature 0 C to 40 C (32 F to 104 F)
Volume 13L (793.31 in3)
Weight (without batteries) 5.7 kg (12.5 lb)
Video output HDMI
Weight (with batteries) 6.6 kg (14.5 lb)

SPD-V010 Handheld Roll Gap Checker


Overview



The handheld roll gap checker is specially used to measure the length between spherical surface, arc surface and plane (or spherical surface). It is specially suitable for the opening adjustment of the roll gap of the metallurgical continuous casters in various specifications, because the roll gap checker has the advantages of high resolution, accurate measurement, stable data and easy to use. Because the opening accuracy of the roll gap checker will directly affect the quality of the casting block, this roll gap checker is an indispensable testing equipment in the continuous casting equipment, which can fully meet the needs of on-site installation testing and use process verification. When the hand-held roll gap meter smoothly passes through the gap between the guide rolls of the continuous casting machine, the upper measuring contact of the hand-held roll gap checker contacts the inner arc roll and the lower measuring contact touches the outer arc roll. The handheld roll gap checker is used in perpendicular to the roll diameter direction, during the pushing process, when the hand-held roll gap meter is in the tangent plane of the upper and lower rolls, the measured value is the smallest at this time, and this value is the roll gap measurement value. The design of the hand-held roll gap gauge ensures that the upper and lower contacts of the roll gap checker can smoothly pass the measured roll along a straight line during measurement.

During the measurement process, the roll gap measuring instrument automatically compares the measured values, and displays the minimum measured value on the instrument display interface, which is the current measured roll gap value.


The technical parameters

1. Measuring range of instrument type handheld roll gap checker: 180mm - 400mm (the range can be customized)

2. Measuring range of digital hand-held roll gap checker: 120mm - 400mm (the range can be customized)

3. Measuring range of hand-held thin slab roll checker : 60mm - 150mm (the range can be customized)

4. Measurement accuracy: 0.01mm

5. Working temperature: 25 85

6. Battery capacity: 5000mAh

7. Charger specification: 12V

Product description

Insulation resistance tester with absorption ratio embedded real-time industrial microcomputer operating system, ultra-thin wire-shaped sheets header with the perfect combination of dot matrix liquid crystal display, the instrument is with a variety of voltage output level (250V,500V,1000V,2500V,5000V,10000V), high capacity, strong anti-interference, the pointer and digital synchronous display, AC-DC dual-use, simple operation, automatic calculation of various insulation index (absorption ratio, polarization index), all measured characteristics with the anti-power-down function .



Technical index

Measuring range and accuracy

(Temperature, humidity: 235, 45 75%RH)

Model

BC2305

Rated

Voltage

250V

500V

1000V

2500V

5000V

Measuring Range

0.099.9M

Overview

Light digital relay protection tester characteristics; 4/6/8 pairs of 100M Optical Fiber Communication Ethernet interface, can send and receive the sampling value of the IEC61850-9-1 / 2 frame format, Goose, IEEE-1588 packets; more support 24 sets of SV packets +64 groups of Goose packets simultaneously; 3/5 pairs of 2 ~ 10M fiber serial port, can send and receive IEC60044-7 / 8 FT3, national network expansion FT3, Xu Ji privately owned FT3 frame format sampling value " 12 road simulation small signal output, provides testing of protection devices input for small signals;



Technical parameter:

Fiber Ethernet port
4/6/8 pairs 100 Mbits / S, ST, Mode, 1310nm;

IEC61850-9-1 / 2 / Le, Goose, IEEE-1588;

Send dispersion:

Frequency conversion series resonance test device is designed and manufactured for alternating-current withstand voltage test of Possessing a wider application scope, it is the ideal withstand voltage equipment for prefecture-level, municipal-level and county-level high-voltage test departements as well as power installation and repair & testing engineering units.

Frequency Conversion Series Resonance Test Device

(I) Technical index

1. Rated voltage:

2. Quality factor under full load in test of fire power generator: Q10 (relating to load)

3. Quality factor under full load in cable test: Q 30 (relating to load)

4. Quality factor under full load in test of main transformer: Q 30 (relating to load)

5. GIS, the quality factor under full load in switch test and other tests: Q 50 (relating to load)

6. Input power supply: single phase of 380V

7. Frequency adjustment range: 20Hz 300Hz

8. Accuracy of system measurement: 1.5

9. The unit possesses protective functions, such as over voltage, over current and zero start.



(II) Description for main configuration and technical data of equipment:

1. One set of variable-frequency power supply:

Rated power: 10kVA;

Input voltage: single phrase of 220V or three phase of 380V 10% and 45 65Hz

Output voltage: 0 400V adjustable

Output voltage frequency: 30 300Hz

0.1Hz adjustable stepping

Instability degree of frequency 0.02%

Output current: 0 25A

2. High-voltage resonane reactor (4sets in all): 27kV/1A

Rated working voltage: 27kV

Rated working current: 1A

Rated inductance value: 120H

Continuous working time: 60min

Temperature rise should be less than 60

Working frequency: 30- 300Hz

3. One set of exciting transformer:

Rated capacity: 10kVA

Input voltage: 400V

Output voltage: 1.2kV/3kV/5kV