Emic vibration test system : Model: f-600bm/a-e90 Sine force: 600 kgf peak Random force: 420 kgf rms Frequency range: 5hz to 2300hz Max.Stroke: 30 mm peak to peak at no load Max. Acceleration: 70g at no load Max. Velocity: 150cm/s Max. Payload wt: 200 kg Max. Bare table acc: 70.5 peak Aramature weight: 8.5kg
Sunkiss matherm was the inventor of the thermal reactor and the first manufacturer who designed an innovating technology for ir radiation, adapting excellently to the requirements of drying, fusing and polymerizing of paints and varnishes. Sunkiss matherm, inventor of the thermoreactor®, was the first manufacturer to create and perfect infrared radiation technology that is particularly suitable for drying, fusion and polymerization. Today sunkiss matherm designs and builds installations for many industrial manufacturers who are looking for savings in time and space, better product finish, energy savings and more flexible operation. Commercial advantages: Atex ec certification: Ce type examination certification by validation of equipment and protective systems intended for use in potentially explosive atmospheres directive 94/9/ec. Time saving: Drying time is always one third to one eighth of the normal time because of the rapid rise in temperature and acceleration of evaporation, fusion and polymerization processes. Space saving: This saving always results in a more compact and shorter tunnel, which favours installation where space is limited. Quality: Improved finished appearance and paint film hardness occur because of core drying, solvent or water evaporation from inside to outside, and also because of the very quick fusion of powder paint. Freedom from dust: Dust contamination is avoided by rapid drying. Solvent vapor removal: The solvents (vocs) in contact with the thermoreactor® during the drying phase are destroyed by flameless oxidation. Energy savings: The reduction in energy consumption, which can be more than 50 per cent, can be explained by the direct transfer of energy from the thermoreactor® to the organic coatings. Productivity: Faster throughput resulting in minimal numbers of paint sprayed items queing for thermoreactor® treatment. Rapidity: The start-up for a tunnel with a thermoreactor® system is only ten minutes.
Espec temperature & humidity chamber: Model: pr -3sp Temp range : -20 degree c to +100 degree c Humidity range: : 20% to 98% rh Inside dim:w600 x h850 x d800mm
Stirring type reactor.
Baisc Ordering Data: Rated Voltage: 6~10.5 KV Rated Current: 1500~3000A Reactance Ratio: 6%~10% Other Special Requirment For more in formation pls refer to our website 3w hslec com Also u can add my MSN adazq at live cn to get more information.
Type: CKSC Standard JB5346 GB10299 IEC289 Basic ordering data: Rated Capacity: 12~960kvar Rated Voltage: 6~10KV Rated Reactance: 0.44~36.29ª+ Weight: 150~3970kg Rated curren and Max. continuous current Cooling Methodú¿AN or AFú¬ For more information pls refer to our website 3w hslec com Also u can add my MSN adazq at live cn to get more information.
Standard: GB10229 IEC289 Basic ordering data: Rated Voltage: 10KV Rated Current: 100~1350A Rated Reactance: 0.35~17.0 Weight: 300~2290KG Each start running timeú¼Continuous operation time Starting and Cooling Period For more in formation pls refer to our website 3w hslec com And also you can send Email to adazq at live cn to get more information .
Qksgk dry-type air core starting reactor connected in series with ac electromotor, it is used for limiting the starting current of electromotor, reactor will be cut off after electromotor is running. Two ends of three-phase of starting reactor is rated reactance value, and its auxiliary tap is 85% of rated value. Type qksgk Standard: gb10229 iec289 Basic ordering data: Rated voltage: 10kv Rated reactance: 0.35~17.0ª+ Rated current: 100~1350a Signle-phase weight: 230~550kg Each start running timeú¼continuous operation time Operation site(indoor or outdoor) For more in formation pls refer to our website 3w hslec com And you can also send email to me to get exactly informations adazq at live cn
The glass-lined equipment is made by coating the high silicon content enamel onto the surface of metal body and then firing them at high temperature ( ~ 900℃ ) in order to achieve a high adhesive strength of the enamel on the steel basic body. The glass-lined equipment, therefore, has high mechanical features and corrosion resistance. Substituting stainless steel and nonferrous metal equipment, the glass-lined equipment is widely used in fine chemical, pharmaceutical, dyestuff, pesticide, metallurgical and food industries. Corrosion resistance stability: very high corrosion resistance against inorganic acid, organic acid, organic solvent with different concentration and weak base, but not applicable to alkali, hydrofluoric acid, fluoride-bearing medium and phosphoric acid with concentration above 30% at temperature over 180℃. Thermal shock resistance: resistance to sudden cooling 110℃, resistance to sudden heating insulation performance: the enamel surface should be strictly tested at 20kv.
2be series water ring vacuum pumps and compressors are the high efficiency energy saving products of our company. It is produced on the foundation of scientific research achievements and production experience for many years, and combined with the advanced technology of import products. It is usually used to pump the gases without small solid granules, and gases that doesn't dissolve in water, and noncorrosive gases, so as to form the vacuum and pressure in the closed container. By changing the structural material, it is also available in aspirating corrosive gas or using the corrosive liquid as the operating liquid. So it is used extensively in many trades such as papermaking, chemical industry, petrol chemical industry, light industry, pharmacy, foodstuff, metallurgy and construction materials, stone implement, coal washing, ore dressing and chemical fertilizer etc.. This series pump is single stage and single acting. It is simply structured and convenient to maintain. It is energy saving and can run stably.Compared with the widely used sk, 2sk and sz series water ring vacuum pump in china, the 2be series pump possesses the notable merits such as the high vacuum degree and the low power consumption etc.. And it is the ideal replacement product of sk, 2sk and sz series water ring type vacuum pump. 2be series water ring vacuum pump assembles with gas-water seperator and is easy to install, operate and maintain. 2.The meaning of model number Take 2bec-303-0 for example 2bec refers to single stage water ring vacuum pump series. 30 tells the the nominal semidiameter of the impeller is 30cm. 3 is the ratio code of the impeller width and diameter. We can easily see that the ratio is 1 according to the formula below. 1----b/d=0.5 2----b/d=0.75 3----b/d=1 5----b/d=1.2 The last number 0 stands for the min suction pressure is 33mbar.(when the number is 1, it refers to the min suction pressure is 160mbar)
Glass lined storage tank Glass lined storage tank 100l--50, 000l Glass-lined reactor Glass-lined plate type condenser Graphite heat-exchanger Glass-lined double cone vacuum dryer By standard container or lcl
The in-line reactor can be scaled up to any power and size for different production capacity. Each reactor can be connected in series to achieve the designated power. In-line reactor can increase the chemical activity during at cavitation process. General Specification : 1) Output power : 1200W 2) Operating Frequency : 20KHz / 25KHz 3) Maximum fluid temperature : 100C 4) Maximum operating pressure : 5 bar 5) Maximum flow rate : 700L/hr/unit
Glass-lined reactors Zibo zhuoxin pump industry co., ltd, including zibo zhuoxin industrial enamel plant, is a well-known manufacturer of vacuum pumps and glass-lined reactors in china. It consists of 38 professional technical staff as well as modern equipment and complete quality testing system. Now we've obtained patents for many techniques, especially the noise reducer for 2bvc series water ring vacuum pump and compressor, which can not only improve the pump's functional performance and service life, but also delete the cavitation and noise. So it is very popular both in the domestic and international market. Our principle: live on quality, develop on unity. Our goal: guarantee the quality and give an absolute satisfaction to clients. We believe: success=credit+quality+service
Bk-300 biodiesel reactor Models BK-300-SS is a semi-automatic and high tech processor that delivers high quality biodiesel that can meet all international specifications such as ASTM D-6751 and EN 14214 set for biodiesel. This unit is electrically heated, has an advance mixing system and come equipped with a 5 micron industrial filter. Temperature controls are provided. All components are standard, as design philosophy calls for global materials and parts availability. Construction is build following the CE standards for industrial and ambient safety. Mixers and pumps are build ATEX. Process temperature controls are mounted on the control panel; a thermostat and an analogue thermometer are provided. This unique, high performance biodiesel plant process waste and virgin vegetable oils such as: Soybean oil , Palm oil, Rapeseed oil, Sunflower oil, Corn oil, Peanut oil, Canola oil, Cottonseed oil, Algae oil etc. Even animal fats are NO problem! The special by Engineers designed reactor and methoxide pre-mix tanks, together with special designed mixers, gives a 37 % better mixing result than what you normally get with the old model round cone-bottom tanks. BK-300 reactor (big and small reactor go on one pallet): Length: 120 cm Width: 87 cm Height: 206 Weight: 167 kg
Reactor Iec60289 standards. As the most famous brand in the field of dry-type transformer in china. It has the advantages of fire retardant, damp-proof, and good radiating ability. And it can go into the center of the load, such as the high-rise buildings, airports, wharfs, electricity plants, residential areas and whole-set substations and other places .Our product's features are as follows: 1.Low losses, low noise, low temperature rise 2. Better overload capacity 3. Intergrated intellectual interface is equipped. Normal conditions:1) altitude: 1, 000m (must be for indoor or outdoor use)2) highest ambient temperature: +40pc3) highest annual temperature per day: +30pc4) highest annual average temperature: +20pc 5) lowest temperature: -5pc6) we can also provide transformers according to customers' requirementsstandards:1) gb6450-86 dry type power transformer2) gb/t10228-1997 technical terms and requirements of dry type power transformer. Iec
Reactors are designed, manufactured and supplied in accordance with GOST R 52630 : 2006, OST 26.291â??94 and/or EN 13445 4:2002, ASME Section VIII Div.1&2. Criteria for selection of materials for manufacturing of reactor shells and piping are based on rich practical experience of AEM specialists in the sphere of oil refining, chemical and power units. Vessel designs may be complemented with other elements depending on input technical requirements and process parameters as defined at design stage Types ofreactors Hydrotreate rs Reformers Isomerization reactors, Technical specifications Diameter: up to 5000 mm Nominal pressure: up to 20 MPa Wall thickness : up to 300 mm Design fluid temperature: up to 550C Material: single metal plated with corrosion resistant material, type 08�¥18�?10�¢, 0813, or other as required by technical design Internals UOP, AXENS, RIFING, etc. Service life : 30 years
Brief Introduction of the Jacket Glass Reactor The series of reactor kettles is my company according to the actual requirements of customers and the standard production of new double glass reactor with cylindrical glass reactor body, which absorb the international and domestic advantages of similar products, while bold and innovative, not only easy to use (one can easily move, , And the structure of innovative and practical, beautiful appearance generous, leading domestic; for modern chemistry, fine chemicals, bio-pharmaceuticals, new materials, such as the synthesis of experimental and production of the ideal equipment. Specific specifications from 1L to 200L optional. The working principle of the series reactor: double-layer glass reactor inside the reaction material, but also can be vacuum to do the stirring reaction; sandwich can be connected to heat (water, water or hot oil or electric sets) to do heating or cooling; The reaction solution was controlled to evaporate and reflux. Main Features of the Jacket Glass Reactor 1, The use of borosilicate glass (GG17 material), has excellent physical and chemical properties. 2, Speed mixing, smooth and reliable operation, torque, no spark. 3, PTFE components mechanical seal, proprietary technology, can maintain the market similar products, high vacuum (-0.095mpa or so), the leading domestic. 4, PTEE discharge valve, kettle body and lid are also customized according to customer requirements. 5, The reaction of the sandwich heating (cooling) solution can be completely removed after the reaction, no solution. 6, Regardless of refrigeration or heating, can be produced according to customer requirements matching products. 7, The overall structure of science, novel, practical, beautiful, leading domestic.
Jacket Glass reactor principle is two parts, in the inner glass,the mix bar is continous stirring to make mixing or evaporating reaction under negative vacuum pressue. The stirring is under speed controlling. The jacketed glass could supply heating or cooling material to help the chemical reaction. Recently glass reactors has been widely used in chemical, biological and pharmaceutical experiment and prodcuction. Brief Introduction of the Jacket Glass Reactor The series of reactor kettles is my company according to the actual requirements of customers and the standard production of new double glass reactor with cylindrical glass reactor body, which absorb the international and domestic advantages of similar products, while bold and innovative, not only easy to use (one can easily move, , And the structure of innovative and practical, beautiful appearance generous, leading domestic; for modern chemistry, fine chemicals, bio-pharmaceuticals, new materials, such as the synthesis of experimental and production of the ideal equipment. Specific specifications from 1L to 200L optional. The working principle of the series reactor: double-layer glass reactor inside the reaction material, but also can be vacuum to do the stirring reaction; sandwich can be connected to heat (water, water or hot oil or electric sets) to do heating or cooling; The reaction solution was controlled to evaporate and reflux.
Brief Introduction of the Single Glass Reactor 1. Single glass reactor using borosilicate glass, has excellent physical and chemical properties, bottles and transparent, visible reaction liquid material 2. Stirring tetrafluoroethylene, used in a variety of solvents stirring 3. Motor running smooth, torque, no spark 4. PTFE sealing components, high vacuum 5. Heated oil / water bath with precise control 6. Deconstruction is compact, easy to operate Function feature of the Single Glass Reactor 1. Distillation, reflux can be achieved simultaneously 2. Special long-term agitation seal 3. GG17 glass and PTFE materials and contacts, no cross-contamination. 4. Digital speed and high and low temperature display, easy operation
Features 1. Reaction kettle can be lift up and down. It is convenient to feed materials and take the blocky crystals out of the kettle. 2. Reaction kettle can be rotated for 120 degree, it is convenient to use and clean. Technical Data Glass reaction vessel: 10L; Jacket capacity: 3L; High borosilicate glass 3.3; Kettle body tolerable temperature: -80 to +200 degree; Kettle body resistance to temperature difference: 90 degree; Motor power: 90W; Stirring speed: 50 to 500rpm; Operating pressure(MPa): Vacuum or normal pressure.
