Steel billets result from the second stage of the steel production process. They are hot-rolled or forged from an ingot or strand cast.
steel billets from 45 x 45 mm to 150x150 mm, and round steel billets from 120 mm to 270 mm in diameter. Length : Specifiable up to 12 m Quality : In various internationally well known standards including afnor (nf), aisi, astm, bs, din, euronorm, gost, jis, iso, sae, si, ts, uni, etc. (eg. Astm a 615 gr 40 or 60, bst 420 s, din 488, st 37.2 din 17100, nfa 35015 and 16, bs 4449 (gr 250 or 460), jis g 3112 (sd 30, 35, 40), si 739 s 400, si 739 s 400 w, feb 44 k, 3 sp/ps or 5 sp/ps gost 380 88, 35 gs or 25 g2s, gost 5781-82, etc) Other grades available according to customer's request
STEEL BILLETS 3SP AND 5SP
ORIGIN : SAUDI ARABIA, QATAR, TANZANIA, INDIA, CHINA, MUSCAT
Steel billets of various dimensions available.
These are available in the following sizes (mm): 100X100 ; 120x120; 125x125; 130x130 ; 150x150S
Standard : JIS G3141, ASTM A653, GB, Ghos 380, BS 4449, EN 10025
Steel billets result from the second stage of the steel production process. They are hot-rolled or forged from an ingot or strand cast. Smaller and longer than a bloom, billets are usually a square cross-section less than 36 square inches.
They are used for the manufacture of all ‘long’ steel products such as bars, rods, pipes, tubes, wire and wire products.
Steel Billet, also called bar stock, is technically a semi-finished casting product that needs further processing before becoming a finished material. Actually, since billet is grained in its structure as a metal it processes very intricately.
Steel Billet is, in fact, a length of metal with a square or round cross-section.
It is used in general and structural purposes.
Pipes and wires are 2 of the main products made with billets. Billets are also used as raw materials or feedstock in forging, rolling and other metal-processing operations. The range of semi-finished products above 155 mm x 155 mm is called blooms. Blooms have rectangular cross-sections. The name Bloom comes from Bloomery. Another condition for a bloom is that the cross-section must be greater than 36 sq. inches. We in Arij supply high-quality Cast Square Billets of varied lengths and cross-sections. However, standards for steel billets vary and each must feature the chemical composition necessary for producing the desired product. We provide international specifications including BS, ASTM, EN, etc. or any other tailor-made requirements of our clients.
different grades:
5Sp
3sp
different cross sections:
150*150 mm
130*130 mm
125*125 mm
A billet is a length of metal that has a round or square cross-section, with an area less than 36 in2 (230 cm2). Billets are created directly via continuous casting or extrusion or indirectly via hot rolling an ingot or bloom. Billets are further processed via profile rolling and drawing. Final products include bar stock and wire.
Centrifugal casting is also used to produce short circular tubes as billets, usually to achieve a precise metallurgical structure. They are commonly used as cylinder sleeves where the inner and outer diameters are ground and machined to length. Because their size is not modified significantly, they are not always classified as semi-finished casting products.
A billet is a length of metal that has a round or square cross-section, with an area less than 36 in2 (230 cm2). Billets are created directly via continuous casting or extrusion or indirectly via hot rolling an ingot or bloom. Billets are further processed via profile rolling and drawing. Final products include bar stock and wire.
Centrifugal casting is also used to produce short circular tubes as billets, usually to achieve a precise metallurgical structure. They are commonly used as cylinder sleeves where the inner and outer diameters are ground and machined to length. Because their size is not modified significantly, they are not always classified as semi-finished casting products.
A billet is a length of metal that has a round or square cross-section, with an area less than 36 in2 (230 cm2). Billets are created directly via continuous casting or extrusion or indirectly via hot rolling an ingot or bloom. Billets are further processed via profile rolling and drawing. Final products include bar stock and wire.
Centrifugal casting is also used to produce short circular tubes as billets, usually to achieve a precise metallurgical structure. They are commonly used as cylinder sleeves where the inner and outer diameters are ground and machined to length. Because their size is not modified significantly, they are not always classified as semi-finished casting products.
Please find here below our spot Steel Billets lot offer,
Turkish Origin 3SP and 5SP
FOB-Mersin Port
Fob Mersin : 365USD
Payment : %25 AGAINST PROFORMA + %75 after loading against SGS and BL
Quantity : 2.500MT (not more not less)
Size : 150x150x12M or 150x150x6M
Grade : 3SP
Loading : 5-8bdays after prepayment
FOB-Mersin Port
Fob Mersin : 365USD
Payment : %25 AGAINST PROFORMA + %75 after loading against SGS and BL
Quantity : 2.500MT (not more not less)
Size : 150x150x12M or 150x150x6M
Grade : 5SP
Loading : 5-8bdays after prepayment
Goods : Steel billet
Origin : RUSSIA
Quantity : 50.000MT (not-more, not-less) X 12MONTHS
Grade : 3SP OR 5SP
Size : 130x130x12000
Price : $385 FOR EUROPE AND MEDSEA / REST OF WORLD 395USD PER TON
Payment : After Loading against SGS and BL and rest of shipping documents
Instrument : buyer bank will issue attached Payment Guarantee Letter
and
Goods : Steel billet
Origin : USA
Quantity : 50.000MT (not-more, not-less) X 12 MONTHS
Grade : ASTM GRADE 40 OR 60
Size : 130x130x12000 OR 150X150X12M
Loading : 5 - 7B DAYS after pre-payment
Price : $380 FOR EUROPE AND MEDSEA / REST OF WORLD 390USD PER TON
Payment : After Loading against SGS and BL and rest of shipping documents
Instrument : Buyer bank will issue attached Payment Guarantee Letter
Sales steps:
1-) Buyer FULL details required.
2-) Seller issue proforma invoice
3-) Buyer bank issue attached Payment Guarantee for 12 Months validity and send original to seller address
4-) Upon received Payment Guarantee seller will start loading
5-) When the loading completed seller send SGS, BL and rest of shipping documents the buyer and Buyer will pay total amount by swift transfer.
Commission: 5USD per ton.
1040 Steel Billets Suppliers
Short on time? Let Steel Billets sellers contact you.
