- High Quality Coverall - Manufactured in South Korea *FDA Approved
Code 52110: For surgical wound drainage Features Nature rubber formation. Non-sterile. Smooth tubing wall, both outside & inside. X-ray opaque, ready to implant. Peel apart package. Length : 18(12 is also available) Diameter: 1/4, 3/8, 1/2, 5/8, 3/4, 1
Code 85750: Anchor wound dressings on fragile or at-risk skin Features Anchors wound dressings on fragile or at-risk skin. Secures tubing and devices. Gentle yet secure, waterproof and snug fit. Color: Flesh Tear type: Easy-tear or normal Size: 2.50 cm x 150 cm 5.00 cm x 150 cm
Code 85300: Made of polyethylene with acrylic coating. Features Made of polyethylene with acrylic coating. Hypoallergenic adhesive, leaves little or no residue. Porous and breathable. Perforated for easy tearing by hand. Thin, flexible and strong adhesive Material: Polyethylene Size: 1.25 cm x 9.14 M (1/2''x10yds) 2.50 cm x 9.14 M (1''x10yds) 5.00 cm x 9.14 M (2''x10yds) 7.50 cm x 9.14 M (3''x10yds)
Code 82700: Moisturizes, lightens the scar, hypoallergenic Features 1. Flesh color silicone sheeting with hypoallergenic adhesive. 2. Snug-fitting, washable and reusable for more than 15 times. 3. Pain-free and easy removal. Size: 1 cm x 10 cm x 1 sheet Material: PU, silicone gel
Code 89300: Adhesive transparent PU film for wound protection from water, dirt & germs Features: 1. Transparent PU film, coated with hypoallergenic adhesive. 2. Strong adhesion yet easy to remove that leaves little or no residue. 3. Waterproof but air permeable, it shields out water Material: PU Shape: Round-cut or angle-cut Size: 4 x 4 cm (1.6''x1.6'') 6 x 7 cm (2.4''x2.8'') 10 x 12 cm (4''x4.8'')
Code 89300: Adhesive transparent PU film for wound protection from water, dirt & germs Features: 1. Transparent PU film, coated with hypoallergenic adhesive. 2. Strong adhesion yet easy to remove that leaves little or no residue. 3. Waterproof but air permeable, it shields out water Material: PU Shape: Round-cut or angle-cut Size: 4 x 4 cm (1.6''x1.6'') 6 x 7 cm (2.4''x2.8'') 10 x 12 cm (4''x4.8'')
Code 89600: Adhesive transparent PU film for wound protection from water, dirt & germs Features: 1. Transparent PU film, coated with hypoallergenic adhesive. 2. Strong adhesion yet easy to remove that leaves little or no residue. 3. Waterproof but air permeable, it shields out water, Materialï¼? PU film Size: 6 x 7 cm (2.4''x2.8'') 10 x 13 cm (4''x5.1'')
Code 81100: Non-adherent absorbent pad Features 1. Porous non-adherent film on both side with absorbent pad in the middle . 2. Absorbent pad absorbs drainage away from wound. 3. Non-adherent film will prevent absorbent pad sticking to wound Color: White Size: 5 x 5 cm (2''x2'') 7.5 x 7.5 cm (3''x3'') 10 x 10 cm (4''x4'')
Code 82220: Non-woven adhesive dressing with absorbent pad Features 1. Non-woven fabric laminated with released paper. 2. Designed for thumbs,toes, finertips and finger joints where bandages do not hold well. 3. Individually wrapped and gamma sterilized. Color: White Size: 4.5 x 5 cm (1.8''x2'') 3.8 x 7.6 cm (1.5''x3'')
SpO2 cables are specifically designed to connect the SpO2 sensor, typically placed on a patient's finger or earlobe, to the monitoring device. These cables transmit the optical signals captured by the sensor to the monitor, where the data is processed and displayed as oxygen saturation levels.
Medical cable assembly for electrosurgical pencil
Medical grade PET, PETG blister, tray and HDPE cleancut card for medical device packaging.
The Hem-o-lok Ligating Clip System, produced by Teleflex under the Weck brand, is a medical device used in surgical procedures for the ligation (closing off) of vessels or tissue structures. The Hem-o-lok clips are commonly utilized in laparoscopic and robotic surgeries. Key features and aspects of the Teleflex Weck Hem-o-lok Ligating Clip System include: Material: The clips are typically made from a polymer material, providing a secure and reliable closure when applied to vessels or tissues. Design: Hem-o-lok clips are designed to be easy to use, with a simple mechanism for application. They are available in various sizes to accommodate different surgical needs. Application: Surgeons use Hem-o-lok clips to occlude or ligate blood vessels or other structures during surgery. These clips are widely used in minimally invasive procedures, such as laparoscopic and robotic surgeries. Secure Closure: The design of the clips aims to provide a secure closure, preventing bleeding or leakage from the ligated structures. Color Coding: The clips are often color-coded according to size for easy identification during surgery, allowing surgeons to choose the appropriate clip for the vessel or tissue being ligated.
Biosensors is a medical device company known for its innovations in interventional cardiology, particularly in the field of coronary stents. The BioMatrix platform includes a range of drug-eluting stents (DES) designed to be used in the treatment of coronary artery disease. Key features of the BioMatrix stent platform, which may extend to the NeoFlex model if it's a part of the series, may include: Drug-Eluting Stent: The stents in the BioMatrix platform are drug-eluting, meaning they are coated with a medication (such as an anti-restenotic drug) designed to inhibit the regrowth of tissue inside the treated blood vessel. Biodegradable Polymer: Some versions of the BioMatrix stent use a biodegradable polymer to deliver the drug to the target site. The polymer gradually dissolves over time, leaving only the metallic stent behind. Flexible Design: The stents are designed to be flexible, allowing for easier navigation and deployment in the coronary arteries. Thin-Strut Technology: Thin struts can contribute to improved deliverability and conformability of the stent to the vessel wall. Various Sizes: The BioMatrix stent platform typically offers stents in various sizes to accommodate different patient anatomies and lesion characteristics.
The EV3 SpiderFX is commonly associated with the SpiderFX Embolic Protection Device, which is used in the field of interventional cardiology. The device is designed to capture and remove embolic debris that may be released during certain vascular procedures, particularly during carotid artery stenting. Key features of the EV3 SpiderFX Embolic Protection Device may include: Embolic Protection: The primary function of the device is to provide protection against embolic debris dislodged during the intervention. It helps prevent these debris from reaching and potentially blocking smaller blood vessels. Flexible Design: The SpiderFX typically has a flexible design that allows it to navigate through blood vessels, facilitating the deployment and retrieval process. Distal Protection: The device is designed to be positioned distal to the treatment site, capturing any embolic debris before it can travel downstream. Capture Basket: The device often includes a capture basket that traps and retains embolic debris, preventing it from causing harm in the circulation. Compatibility: The SpiderFX device is designed for compatibility with various catheters and guide wires commonly used in interventional procedures.
Key features and characteristics of the Bard Denali DL950F Vena Cava Filter may include: Retrievable Design: The Bard Denali DL950F is often designed to be retrievable, allowing for potential removal when the risk of pulmonary embolism has decreased. Cone Design: Vena cava filters typically have a cone-shaped design that helps to trap and prevent blood clots from traveling to the pulmonary arteries. Biocompatible Materials: The filter is typically made of biocompatible materials suitable for long-term implantation. Ease of Deployment: The deployment mechanism is designed for ease of use during the implantation procedure. Radiopaque Markers: Radiopaque markers are often incorporated into the design to aid in accurate placement under fluoroscopy or other imaging modalities. Compatibility with Imaging: The device is designed to be compatible with various imaging technologies, allowing healthcare professionals to monitor its position and effectiveness.
An endobronchial tube is a medical device designed for use in the respiratory system, specifically within the bronchial tubes. These tubes are used in various medical procedures, such as bronchoscopy, endobronchial intubation, and lung surgery. The primary purpose of an endobronchial tube is to maintain an open airway and facilitate the delivery of oxygen or anesthesia to the patient's lungs during surgical or diagnostic procedures. Key features and uses of endobronchial tubes include: Bronchoscopy: Endobronchial tubes are often used in bronchoscopy procedures, allowing physicians to visually examine the bronchial tree and perform diagnostic or therapeutic interventions. Lung Surgery: During certain lung surgeries, endobronchial tubes may be employed to isolate and collapse one lung, providing a clear field of view for the surgeon. Ventilation: Endobronchial tubes can be used for selective lung ventilation. They can be positioned to direct ventilation to a specific lung, allowing the other lung to be collapsed or isolated. Anesthesia: In some cases, endobronchial tubes are used for delivering anesthesia during thoracic surgeries or procedures.
I can provide some general information: PTFE Guide Wire: PTFE stands for polytetrafluoroethylene, which is a synthetic fluoropolymer of tetrafluoroethylene. It is known for its low friction properties and is often used in medical applications. Medtronic: Medtronic is a global healthcare company that produces a wide range of medical devices and technologies. This includes products used in cardiology, neurology, diabetes, and other medical specialties.
For medical gases, Argon is commonly used in various medical applications, including surgical procedures, where it can be employed for tissue coagulation or as a cryogen. The specific details of a product, such as its pressure, purity, and intended use, would be provided by the manufacturer or supplier.
