MATERIAL: PC natural 100% pure pc without any coating
CATEGORY: PC
TYPE: Natural
SPECIFICATION: Separate 25 kg bag and Mark per month 78 mt 100% pure pc without any coating ,post Industrial materials
Origin: Bangladesh
LOADING WEIGHT: 24 Ton
FOB (USD/Ton): 1450$ - 1700$
Packaging: Jumbo Bag
Est. Shipping Time: 15, 30, 45 days
Our Commitment
We are committed to delivering in accordance with the quality given, source and licensed in the field of scrap transportation.
2Lians always for the purpose of satisfying customers on the criteria of sustainability and fairness through high work efficiency
PP8000SH
POLYESTER PUTTY - HEAVY
A combination of a special unsaturated polyester resin with a selected quick setting for subsequent coats for the complete Ritver paints system.
PP8004
POLYESTER PUTTY - LIGHT
A lightweight two-component Polyester based putty, formulated to exhibit very good adhesion and high elasticity.
This product is suitable for large surface areas; is easy to apply and provides excellent sandability.
ARP329
Body Guard Undercoating is a premium undercoating material with corrosion protection, excellent spray pattern, coverage and adhesion; protects underbody parts from rust and stone chipping.
DATA SHEET FOR EPOXY EPOXY COATING :- INTRODUCTION - EPOXY COATING (HYB) is a two part high solids solvent free epoxy phenolic resin based coating system designed for hard wearing, smooth surface finish for floors, walls and on steel structures. Nonskid surface finish can be achieved on floor, if required. FEATURES: 1) Hard Wearing 2) Non Dusting 3) Excellent Surface Finish 4) Non Smelling 5) Good Aesthetics 6) Highly Chemical Resistant APPLICATION: 1.Stir well before mixing Part A and Part B and mix in the prescribed ratio. 2.Apply one coat of EPOXY primer on the clean and dry surface. 3.EPOXY COATING (HYB) should be applied on the surface by brush or roller within 24 hrs. After application of primer coat it should be allowed to air dry for min. 4 hrs. Preferable in a dust free atmosphere. 4.Apply min. 2 coats with the intercoat interval of 6-8 hrs. PRODUCT SPECIFICATIONS: Application - Brush, Roller Mixing Ratio - As Directed on Packing Port Life - 30 Mins. Drying Time - Touch Dry- 30 Min, Hard Dry 6 Hrs. - Intercoat Interval 6-8 Hrs. Min. - Dry Film Thickness 125-150 Microns/per coat - depending on porosity Covering Capacity - 6-8 sq.met/kg per coat depending on porosity, roughness & method of application. Color Shades - All Standard Shades RECOMMENDED USES: 1) Food & Pharmaceutical 2) Work Shop 3) Clean Room Application 4) Chemical Resistant Coating for Concrete& Steel 5) Petrochemical, Fertilizer plants METHOD OF APPLICATION: SURFACE PREPARATION The long-term durability of the applied Epoxy coating (HYB) epoxy coating is dependent on the adhesion between sub-base and coating material. It is most important therefore, that the substrate surfaces are correctly prepared prior to application. 1.Before application of the Epoxy coating (HYB) surface should be free from loose partials, rust, oils, grease or earlier coatings and should be totally dry. 2.New concrete or cementations surface should be placed at least 28 days and have a moisture content of less than 5% before application of Epoxy coating (HYB) 3.After surface is dry, all repair work like sealing of joints, cracks filling of cavities and crevices should be carried out. HEALTH & SAFETY - Keep the containers tightly closed when not in use. Avoid contact with skin & eyes. It comes in contact with the body, wash affected parts with plenty of water and contact a doctor. Other known sector for Epoxy floor lining, Epoxy garage floor lining, Concrete epoxy lining, Concrete floor epoxy lining, Epoxy pipe lining, Marine epoxy lining, Sub marine epoxy lining, Basement lining epoxy floor shield, Louisiana, Oregon, Chip lining color epoxy floor, Aviation lining epoxy interior.
BARILAC barrier coatings are the most suited sustainable solution to replace polycoated laminated board,
waxcoated, PVDC coated etc all non sustainable alternatives. Barilac barrier coat is recommended for
paper cup, trays, foodtrays, pizza boxes, ice cream cartons etc.
The special product features are.
- Low COBB
- Good oil and grease resistance
- Good Moisture Vapour Transmission rate
- Good heat sealing performance
- Good water resistance
- Low odour
- FDA compliance
PP8001SH
FIBER POLYESTER PUTTY
A fiber reinforced high-build polyester putty specially formulated to offer excellent adhesion, strength and ease of application on fiber parts, metal and steel.
Our Wood Coating is one of the best seller products. Based in Mumbai, Maharashtra we offer a huge variety of 15 natural stains that have been especially specially formulated with the superior quality solvent based fast drying stains that aid in accentuating the natural beauty of the wood grains. Wipe and fill the surface and further smooth sand the surface with a 180 grit paper. Next, apply stain with muslin cloths in addition to the grains. Further let the surface dry for about 30 minutes before the application of the finish coat. You can mix the stains with the NC/ melamine finishes approximately 20% by volume, if required. Never mix the stains woody or PU finishes. We are the leading exporter, supplier and manufacturer of Wood Coatings.
FEATURES
Excellent Gloss & Gloss retention, excellent color / non yellowing characteristics
High viscosity, medium Tg and high molecular weight / good drying and forms hard and moderately
flexible film
Excellent pigment wet ability and good resistance to detergents and soaps.
APPLICATIONS
As a decorative and quick drying paints. Industrial quality quick drying paints / as acrylic topcoat for
textured paints. Road marking paints / for pavements / kerb stones / pathways.
clear lacquers for PVC leather cloth / over lacquering and Metallizing / coatings for electronic equipment like TV / video and similar items. Scratch resistant protective coats and polycarbonate glazing.
CHARACTERISTICS
Type of Resin A composition of solution polymerization
Solvent Xylene
Solids 60 +/- 1%
Viscosity(Gardner Tube @25o
C) Z2 - Z4
Acid Value < 10 mg KOH
Color (Gardner) Water white (0.1 max in Gardner)
Clarity Clear
COMPATIBILITY DATA
Long Oil / Medium Oil / Styrenated Alkyd Incompatible
polyols Limited
Cellulose esters Good
Chlorinated rubber Good
Vinyl resin Good
SOLUBILITY DATA
Hydrocarbons Xylene / Toluene: Soluble
Mineral Spirits Limited
Alcohols Soluble
Esters Soluble
Ketones Limited
Long Oil / Medium Oil / Styrenated Alkyd Incompatible
DELIVERY FORM DETAILS (50% XYLENE)
Packing: 190 Kgs / net: 200 Lit Mild Steel Drums
SHELF LIFE
Minimum 12 months when stored under ambient storage conditions.
Two component, acrylic aliphatic polyurethane coating. Offers excellent gloss and colour retention. It is used for subtracts as steel, aluminum, glass-fiber, plywood etc.
2023 Ladies Formal Business Wear Collection available for Private Label with low MOQ requirements. Our High-End collection is available for Private label (your brand) and hang tag with individual plastic packaging. Usual delivery time is 10-14 days upon order confirmation. We have a complete Ladies line please email to inquire.
2023 Men's Formal Business Wear Collection available for Private Label with low MOQ requirements. Our High-End collection is available for Private label (your brand) and hang tag with individual plastic packaging. Usual delivery time is 10-14 days upon order confirmation. We have a complete Men's line please email to inquire.
2023 Men's Business Casual Wear Collection available for Private Label with low MOQ requirements. Our collection is available for Private label (your brand) and hang tag with individual plastic bag packaging. Usual delivery time is 10-14 days upon order confirmation. We have a complete Men's line please email to inquire for catalog.
Product Details:
Product Type Blazer
Material Cotton
Gender/Age Group Men
Season Summer, Winter, Spring, Rainy
Pattern Plain
Supply Ability : 1000 Piece Per Day
Price And Quantity:
Price Range 100.00 - 350.00 INR/Piece
Minimum Order Quantity 60 Piece
Product Specifications:
Gender/Age Group Men
Season Summer, Winter, Spring, Rainy
Material Cotton
Pattern Plain
Product Type Blazer
Trade Information:
Supply Ability 1000 Piece Per Day
Delivery Time 3-7 Days
