Addition cure silicone can be used for cake, candy food grade products mold making, addition cure silicone features low shrinkage.(features for low viscotity , good operation. Excellent performance.
It is one-part acetoxy silicone sealant. It is fast curing and permanently flexible, waterproof and outstanding weather resistant. It is suitable for sealing, repairing, glazing and mending of glass, aquarium, auto windscreen, glazing for window panels and other metal frameworks bonding.
Where to use
They are widely used in industry, building, automotive, packaging, and business, advertisement, and family decoration.They are mainly used in joints adhesion and seal among the glass, tiles, ceramics, aluminum, and fiber glass, power-coated and non-oily wood.
Characteristic
1.One-part,acetoxy room temperature cure, easy to apply.
2.Excellent contact-change ability, no seasonal limited use.
3.Excellent adhesion to most building materials.
4.Outstanding weatherproofing ability, with service life of tens of years.
5.Medium or low modulus, eccellent tensile and compression restoring ability.
Application
1.Clean with solvents such as toluene or acetone to keep the substrate surfaces completely clean and dry.
2.For better appearance cover outside of joint areas with masking taps before application.
3.Cut nozzle to desired size and extrudes sealant to joint areas.
4.Tool immediately after sealant application and remove masking tape before sealant skins.
Limitations
1.Don't use to the joints,which is hidden in earth for long time.
2.Don't use in areas where no moisture has.
3.Don't use in places where have permeated grease,plasticizer or solvent such as wood permeated oil,uncured or half-cured resins,etc.
4.The surfaces coated with paint are unsuitable for sealant.
5.The products have poor adhesion to concrete,marble,mirror-glass,Zn-plated materials because of corrosion produced by acetoxy sealant.In this case,please select neutral silicone sealant.
Silicone rubber for pad printing features description
Pad printing silicone rubber with highprint times and abrasion resistance, without any impurities, with good printingeffects, permanent and durable, we can provide all kinds of colors and ourcatalyst is free charged.
Applications：
The pad printing silicone rubber is mainly use for printing irregular patterns of plastic toys, electroplating toys, trade makers .Silicone pad printing is a carrier which transfer printing the patterns on the steel plate onto the toys products surface.
Silicone rubber for pad printing instructions
Pad printing silicone rubber istwo-component silicone, part a is the liquid silicone rubber, part b is thecatalyst. The usual mixing ratio for silicone rubber and catalyst is100 : 2-3, eg. We take 100grams of liquid silicone rubber, then weadd 2-3 grams catalyst, mix then evenly and pour it to your mold.Then after 2-4 hours, you will obtain a printing pad.
Features
1.Non-exothermic
2.Mold-releasability
3.Dimensional stability
4.Excellent flowability
5.Heat & chemical resistance
Shoe mold silicone rubber
A. Mainly used for shoe soles mold making
B. Two-component silicone rubber with tin-catalyst
C. Cured under room temperature
D. Low shrinkage
E. Excellent fexibility & easy demould
Shoe mold silicone rubber applications
Shoe mold silicone rubber is mainly used for shoe molds, sand casting, sole sampling, plaster models, simple products, products with non-complex patterns, as well as product models with stable size and non-deformation.
Shoe mold silicone rubber features:
A.Two-component silicone rubber with tin-catalyst
B.Cured under room temperature
C.Low shrinkage
D.Excellent fexibility & easy demould
Shoe mold silicone rubber using instruction:
The component a of shoe mold silicone rubber is white flowing liquid and the component b is the curing agent. For example, take silicone rubber of 100g and add 2% curing agent for mixing evenly. After the silicone rubber and the curing agent are completely mixed, put the silicon into a vacuum machine for deairing to remove the bubbles. After deaired, pouring the liquid silicone rubber into the product to be duplicated or into the mold frame.
Notes:
Shoe mold silicone rubber is used for pouring or brushing technique. That is to say, fix the product or sole model to be duplicated onto a plane plate, then enclose the plane frame with wooden plates to prevent the leakage of the silicon , mix the silicone rubber and the curing agent evenly according to the mixing ratio of 100 : 2 and pour them onto the sole model, then brush evenly with a wooden plate or a brush, and fill up the mold frame with gypsum after the silicone rubber is dried
JS-607 catalogue
Characteristics of product:
1. Js-607 acid silicone glass sealant is single component, acetic acid type it easily solidified at room temperature and convenient to use and has solidification rate.
2. Good weatger-agin resistance.
3. Good cementation ability for various building materials.
Major application:
1.Installtion of diversified doors and windows.
2. Cementation and sealing for glass decoration indoor.
3. Suitable for professional persons to use for general joint filling and sealing.
MPS-31, defoamer is water-dilutable silicone emulsion containing silicone 30% active defoamer. Silicone mps-31 defoamer, it is formulated with carefully selected ingredients, which, at the prescribed level, are suitable for use in all industry 31 defoamer has excellent emulsion stability. Even diluted emulsions need only an occasional stirring to remain dispersed.
It is a kind of fast acetic curing( based on polysiloxane), anti-fungi silicone sealant, which cures with atmospheric moisture to foam a high strength rubber seal with excellent adhesion to many surface such as glass, glazed surfaces, metals, most plastics, tiles, wood, concrete etc. GORVIA silicone sealant has excellent physical properties that are designed to provide outstanding durability and excellent UV resistant and weather resistant performance, multi-purpose and ready-to-use.
It is based on moisture curing polyurethane, containing safety propellant, is used to seal gaps and crevices with very high expansion yield UP TO 65 LITERS, the post-expansion is quite low to prevent deformation. The foam that dispenses from aerosol can is moisture cured and draws humidity from the air for pipes, windows and doorframes. Foam can be cut once fully cured, provides excellent bond to lumber, plywood, concrete, metals, masonry and other substrates.
GS-Series N302R is a Neutral Cure GS-Series N302R (non-acid, based on polysiloxane), single component silicone sealant with High tensile strength, high modulus, it is sag resistant and rainwater accessories and will not corrode zinc or zinc/aluminum galvanized steel. It has excellent physical properties that are designed to provide outstanding durability and excellent UV resistant and weather resistant performance, multi-purpose and ready-to-use.
We can supply A grade 156 mm Mono and Multi crystalline silicon solar cells (3.8W-4.0W,efficiency 16.6%) with high quality and best price for large quantity.For specifications,price and futher information,please freely contact us through email.
We can supply 156 mm Mono and Multi crystalline silicon solar wafers (A grade) with high quality and best price for large quantity.For specifications,price and further information,please freely contact us through email.
Withstand temperature up to 650F(34C)
The surface drying time is 2-5mintues
Suitable for all vehicles & make any gasket instantly
Low volatile & valve covers
Intake manifold
Oil pump flanger
Transmission
Water pump.
25gm, 50gm, 70gm 85gm, 100gm, alum blister tube.
15gm, 32gm, 50gm, 70gm, 85gm, 100gm, 300ml tube with box or tube with blister card.
All the shapes of rubber seals can be able to be extruded,including D section,P sections,E section, L section,U- channel,bubble section,key-hole section,triangle sections,etc ,or custom rubber seal.
Material could be in EPDM Rubber,Silicone rubber,Viton Rubber,Foam rubber,PVC,TPE,etc.Co-extruded rubber seals can be available.
Superior adhesion on glass, vitrified surfaces, ceramic tiles, most woods, many plastics, most paints and for Do-It-Yourself applications (car, boat, caravan, house etc.).
Ready gunnability at low (+5ªC) and high (+40ªC) temperatures
Superior flexibility at low (-50ªC) and high (+100ªC) temperatures
Colors Available :Grey, white, black and clear.
Product Data (Uncured)
Density at 25ªC (Method - ISO 1183-1 A) - 0.98~1.05g/ml
Skin forming time at 23ªC/50% r.h. v 25 minutes
Consistency (Method - ISO 7390, Profile U 20) v Non-sag
Extrusion rate at 23ªC (Method - PV 08127) v 800 ml/min.
Product Data (Cured) after 4 weeks¦ storage at 23ªC/50% r.h.
Tensile strength (Method - ISO 8339) v 0.6N/mm2
Hardness shore A (Method - ISO 868) v 18
Elongation at break (Method - ISO 8339) v 200%
Modulus at 100% elongation (Method - ISO 8339) v 0.36 N/mm2
Tear strength (Method - ISO 34, method C) v 4.0 N/mm.
24 cartridges in one box.
1 x 20' will accommodate 2000 cartons.
G1200 Silicone Sealant is a one-component sealant of high modulus, moisture curing, weatherproof, waterproof, low temperature resistant and anti-aging properties. It can be used for assemble and replacement of windshield glass, back window glass and side window glass for automobiles.
The brand KNG 995 structural silicone sealant is mostly used for bond and seal of structural device for glass curtain wall, aluminum curtain wall, stone curtain wall, lighting top and metal constructional engineering. It can be used for the second seal for hollow glass and seal for industry.
The brand kng 995 structural silicone sealant is mostly used for bond and seal of structural device for glass curtain wall, aluminum curtain wall, stone curtain wall, lighting top and metal constructional engineering. It can be used for the second seal for hollow glass and seal for industry.
KNG+ 7132 is an acetoxy curing 100% silicone sealant, which has perfect adhesion with glass and has been especially formulated for glazing and aquarium construction. It can be widely used on windows frames, glass aquariums, repairs gaskets in dryers, ovens, refrigerators and washing machines and repairs rips in awnings.It will not adhere to concrete, cement products, zinc or copper containing metals, marble, limestone or lead and can not be painted over. It is also not suitable for use on oily woods such as cypress, teak or cedar and not suitable for use on roofs and gutters as it will cause corrosion. when used on polyethylene, polypropylene or Teflon, Pre-test plastics is necessary.
Features:
Superior adhesion on glass and glazing surfaces
UV and weather resistant remaining flexible, not shrinking, cracking or drying out
High-Temperature resistance - approximately -40+C +120+C
Superior flexibility +25% joint movement capability & up to 600% Ultimate elongation.
