F600 Power Amplifier Key Feature:
* 2/3U high, heavy duty steel chassis
* Modular construction for easy servicing
* Symmetrical layout for even weight distribution
* High efficiency toroidal power transformer
* Oversized, high energy, linear power supply
* 3 steps, Class H Audio topology
* Stereo, parallel or bridged operation
* Twin balanced inputs (Neutrik XLR connectors)
* Dual Speakon and Binding posts outputs
* High quality components used throughout
* Dual, continuously variable speed fans
* Efficient two sides cooling, the efficiency is better than back to front cooling
* Active, signal, protect and critical indicators
* Duraluminium, 8mm thick front-panel
* Unobtrusive carrying handles
* Voltage Gain: 35 or 40 dB .
Specification:
8ohms Stereo Power(RMS): 2X300W
4ohms Stereo Power(RMS): 2X462W
8ohms Bridged Power(RMS): 968W
Frequency Response(+o/-0.3dB, 1W/8ohms: 20Hz-20kHz, -3dB@135kHz
Power Bandwidth(rated power at 4ohms 1%THD+N): 20Hz-20kHz, -. 1.1dB/+0dB
TourClass Protection: ACL, IGM, AutoRamp, short circuit, DC voltage, turn-on/off transient, current inrush, sub/ultrasonic input
THD+N (1kHz 1W ): -60dB
Voltage Gain (rated power @ 8Ic): X35dB
Input Sensitivity (rated power at 8Ic): 0.97V
Input Impedance (balanced/unbalanced): 20KIc/10KIc
S/N Ratio ("A"weighted, full power at 4ohms): 99dB
Crosstalk ("A"weighted, full power@4ohms): >-63dB
Class: 3 Step H
Input Connectors (per channel): Female XLR (pin 2+, configurable for pin 3+). TRS (tip+)
Output Connectors (per channel): 5-way binding posts or Speakon connectors (market dependent)
Supply Power: 1320W
Power Supply (factory configured): AC220V/230V, 50-60Hz
Cooling: Two side panel variable speed DC fans, better than conventional cooling
Controls: Front panel: 2 attenuators, power switch; Rear panel: Signal ground lift & mode switches.
LED Indicators (per channel): Signal, Protect, Active, Critical
Construction: Steel chassis, 16 gauge. Casting Aluminum front panel.
Dimensions (HXWXD): 88X483X480mm (2U)
Net Weight: 19.2kg
Gross Weight: 23kg.
Features:
High power round transformer, low work noise, Low magnetic leakage, high efficiency Device infixed to prevent front thunder and over voltage
Automatic over current and short circuit Automatic reset circuit. Sound Light alarm Inside power Plug-in and tree- way feed output
Ranging from 3Amps to 10Amps.
Technology Parameter
Item UnitForwardRemark
FrequencyMHZ5-1000
Input voltageAC220í+10%
Output voltageAC60v í+ 10%
Plugging lossDB< or =0.5
Return lossDB>15
Return timeS5 í+5
Max output current Sum of all output current must be under the MAX current
VolumeMn270mn*195
Dimensionsmm268*212*197
WeightKGS6.7.
Covering wide frequency range163;187;low phase noise163;187;good frequency strucm163;187;wide working temperature range163;187;universal sma rf out and in interface
Application
Used in microwave measuring instruments, frequency synthesizer, broad band radar recivers and ew systems
Description
Covering frequency range 8ghz161;162;8161;171;10ghz, etc163;172; low noise design contributes to the excellent low phase noise output)163;187;all the products can be offered both indenpendently and combining with special analog
Detailedú¦
1. SMD electronic hardware,SMT technologyical maintain high quality.
2. Corrar clip transmitter,high sensitivity,prevent howling,clear timbre.
3. Quartz surge circuitry,steady frequency without disturbance.
4. 65 group VHF 180-265MHz.no disturbance in frequency,have large scope for selection.
5. Two kind of power to choose:built-in rechargeable battery,external 12V DC.
6. When use the DC sudden power off,embedded storage battery auto-work.
7. Wire and wireless microphone loadspeaker.
8. With digital reverberation.
9. Collar clip microphone and handhoid microphone for your choice.
DVD function.
Output Power:2X75W(8ª+)
2X90W (4I)
Frenquency Response:20Hz-20KHzí+3dB
Input Sensitivity:250mv
SNR:85dB
Distortion: <0.5%
Power Voltage: 220-240V/50-60Hz
Height X With X Depth: 150 X 430 X 325mm
Weight: 8kg
Introduction
C-mark ga500 digital mini amplifier, powered by built-in integrative digital power amplifier, features light weight, high efficiency, best sound, safe protection, incredible compatibility of electromagnetism and open choices of 110vac&220vac power supply.
Features
1. Plug & play, user-friendly, clear indication, easy manipulating for nonprofessionals.
2. The digital power amplifier features best sound, high efficiency and high reliability.
3. Complete protection from short circuit, over surge current, over heat, over voltage, power limiting, over temperature frees users from worry of malfunction.
4. The amplifier can be configured three output modes, stereo, mono and bridged. Signal input/output adopts ª)6.35 stereo interface for balance signal transmission.
5. Suitable for many applications like commercial, company, entertainment, school and army etc.
Specifications
Output power
8ª+: 300w x 2 (1khz)
4ª+: 600w x 2 (1khz)
Bridged
8ª+: 1000w (1khz)
Free power combination from 1pcs to 7pcs in a standard rack as you like, if 7 pcs combined, max power can reach 8ª+ 300w x 14=4200w;4ª+ 600w x 14=8400w;8ª+ bridged 1000w x 7 =7000w channel.
Input sensitivity: 0db
Professional sound box
Type of this modelapplication to karaoke object, ballroom, other assistant+outdoor
Frequency response 50hz-18khz(3db)
Recommendatory input power 300w
P.M.P.O 400w
Sensitivity 97db(1-1m)
Impedance 8
Speaker unit Low-15"-1 horn
other
Polar pattern 90ph-40pv
Color ruby-red /black
Amplifier at optionAk-180
N.W. 26 kgs / 57.3 lbs
G.W. 29 kgs / 63.9 lbs
L - w - h, box 16.1"-16.1"-25.6" / 410x410x650 mm
L - w - h, package 18.5"-18.5"-28.0" / 470x470x710 mm
777 Amplifiers Suppliers
Short on time? Let Amplifiers sellers contact you.