Foods and raw food materials, earth friendly greases, lubricants, chemicals, rust inhibitors, fuel saving products, agricultural and water probiotics..
Biological, chemical and physical characteristics related to food safety Benz(a)pyrene content is not more than 0,002 mg/kg
Foreign additives none
Mineral oil none
Transparency transparent without sediments
Smell and taste odorless, impersonal taste
Color number, mg of iodium not more than 10
Acid number, mg KON/g not more than 0.40
Mass fraction of non-fat impurities, % none
Mass fraction of phosphorus containing substances, % not more than:
In terms of stearooleolecethin 0,60
In terms
Soap (quality test) none
Mass fraction of moisture and volatile substances, % not more than 0,10
Peroxide number, mol of active oxygen/kg not more than 10,0
Cold test passed
Shelf life and storage conditions 18 months (from production date). Store in covered dark room (places) away from heat and light, store closed
Packaging Bulk sunflower oil is transported in railway tanks equipped with a bottom
discharge, in tank trucks with tightly closed hatches and other covered vehicles
Free Fatty Acids % 0,10 max ISO 660
Peroxide Value meqO2/kg 1,0 max ISO 3960
Taste/Odour Neutral/Bland
Phosphorus ppm 5,0 max ICP
Colour, red Lovibond 51 4 1,2 max AOCS Cc 13e-92
ADDITIONAL INFORMATION
Size Typical Ranges
Relative Density (20C) g/cm3 0,919 0,925
Refractive Index (40C) - 1,466 - 1,470
Smoke point C >200
Iodine Value gI2/100g 124- 139
We are an international manufacturing and trading company based in India.
Our vast network of resources across the regions allows us to offer a wide range of commodities across the sectors.
We are a leading producer and exporter of pure ghee, renowned for its superior quality and deep flavor. Our ghee's nutritious value and purity are guaranteed by its traditional production processes. We provide outstanding items that satisfy a range of culinary needs to both domestic and foreign markets.
If there is a requirement, perhaps we could discuss more, or you may send us a request.
Turmeric powder specifications can vary depending on the industry (food, pharmaceutical, or cosmetic) and the country of origin. However, here are the general specifications for food-grade turmeric powder:
Physical Properties
Appearance: Fine powder
Color: Yellow to orange
Odor: Characteristic earthy, slightly bitter
Taste: Bitter, slightly pungent
Chemical Composition
Curcumin Content: Typically 2-5% (higher grades can go up to 8-10%)
Red chilli powder specifications can vary based on quality, processing, and industry standards (food, pharmaceutical, or industrial). Below are the general specifications for red chilli powder:
Physical Properties:
Appearance: Fine, free-flowing powder
Color: Bright red to deep red (depends on variety and processing)
Odor & Taste: Characteristic pungent smell and spicy taste
Particle Size:
40 Mesh (Coarse)
60 Mesh (Medium)
80-100 Mesh (Fine)
Moisture Content: Max 8-12%
Bulk Density: 0.40 - 0.80 g/ml
Extraneous Matter: Max 1%
Chemical Properties:
Capsaicin Content: 0.2% - 2% (depends on variety)
ASTA Color Value: 80-200 (higher value indicates better color)
Total Ash: Max 8%
Acid Insoluble Ash: Max 1.5%
Crude Fiber: Max 30%
Non-Volatile Ether Extract (Oleoresin): 12-18%
Pungency (Scoville Heat Units - SHU):
Low Pungency: 500 - 5,000 SHU
Medium Pungency: 5,000 - 15,000 SHU
High Pungency: 15,000 - 100,000+ SHU
Microbiological Standards:
Total Plate Count: Max 100,000 CFU/g
Yeast & Mold: Max 1,000 CFU/g
Coliforms: <10 CFU/g
E. Coli: Absent
Salmonella: Absent
Aflatoxins:
B1: Max 5 ppb
Total (B1, B2, G1, G2): Max 10 ppb
Contaminants & Adulterants:
Pesticide Residues: As per country-specific regulations (FSSAI, EU, FDA)
Heavy Metals: Below permissible limits (Pb < 2 ppm, Cd < 1 ppm, As < 1 ppm)
Artificial Colors/Dyes (Sudan I-IV, Rhodamine B, etc.): Must be absent
Jaggery is an unrefined natural sweetener made from sugarcane juice or palm sap. It is widely used in food, confectionery, pharmaceuticals, and traditional medicine. Below are the general specifications for jaggery:
Physical Properties:
Appearance: Solid blocks, cubes, granules, or powder
Color: Golden yellow to dark brown (varies based on processing and raw material)
Odor & Taste: Sweet, characteristic aroma, free from off-odors or fermentation
Texture: Hard or semi-soft, depending on moisture content
Moisture Content: Max 5-8% (for solid jaggery), Max 10% (for powdered jaggery)
Jaggery powder is a finely ground, unrefined natural sweetener made from sugarcane juice or palm sap. It is widely used in food, confectionery, beverages, and pharmaceutical applications. Below are the general specifications for jaggery powder:
Physical Properties:
Appearance: Fine, free-flowing powder
Color: Light golden yellow to dark brown (depends on processing and raw material)
Odor & Taste: Sweet, characteristic jaggery aroma, free from off-odors or fermentation
Groundnut oil, also known as peanut oil, is an edible vegetable oil extracted from peanuts. It is widely used in cooking, food processing, pharmaceuticals, and cosmetics. Below are the general specifications for groundnut oil:
Physical Properties:
Appearance: Clear, bright, and transparent liquid
Color: Light yellow to golden yellow
Odor & Taste: Mild peanut aroma and taste, free from rancidity
Texture: Smooth, free from impurities
Moisture & Volatile Matter: Max 0.1%
Refractive Index (at 40C): 1.460 - 1.470
Density (at 20C): 0.910 - 0.920 g/ml
Chemical Properties:
Free Fatty Acid (FFA) (as Oleic Acid): Max 0.2-1.0% (depending on grade)
Peroxide Value: Max 10 meq/kg
Iodine Value: 85 - 100 (indicates degree of unsaturation)
Saponification Value: 185 - 195 mg KOH/g
Unsaponifiable Matter: Max 1.0%
Acid Value: Max 2.0 mg KOH/g
Phosphorus Content: Max 10 ppm
Fatty Acid Composition (% by weight):
Saturated Fatty Acids:
Palmitic Acid (C16:0): 8-14%
Stearic Acid (C18:0): 1-4%
Monounsaturated Fatty Acids (MUFA):
Oleic Acid (C18:1): 35-72%
Polyunsaturated Fatty Acids (PUFA):
Linoleic Acid (C18:2): 13-45%
Contaminants & Adulterants:
Pesticide Residues: As per country-specific regulations (FSSAI, EU, FDA)
Heavy Metals:
Lead (Pb): <0.1 ppm
Cadmium (Cd): <0.05 ppm
Arsenic (As): <0.1 ppm
Mercury (Hg): <0.02 ppm
Aflatoxins (B1, B2, G1, G2): Max 10 ppb
Trans Fatty Acids: Must be absent
Artificial Additives & Preservatives: Must be absent
Ginger powder is a finely ground product obtained from dried ginger rhizomes (Zingiber officinale). It is widely used in food, beverages, pharmaceuticals, and cosmetics. Below are the general specifications for ginger powder:
Physical Properties:
Appearance: Fine, free-flowing powder
Color: Light yellow to pale brown (varies based on drying method and origin)
Odor & Taste: Strong, characteristic ginger aroma with a pungent, spicy taste
Texture: Smooth, free from lumps and foreign matter
Moisture Content: Max 8-10%
Particle Size: 80-100 mesh (customizable based on requirements)
Solubility: Partially soluble in water
Chemical Properties:
Total Ash Content: Max 6%
Acid Insoluble Ash: Max 1.0%
Volatile Oil Content: Min 1.5-2.5% (responsible for aroma and flavor)
Crude Fiber: Max 5%
Starch Content: 40-50%
pH (5% solution): 4.5 - 6.0
Pungency (as Gingerol Content): Min 0.8-2.0%
Microbiological Standards:
Total Plate Count: Max 100,000 CFU/g
Yeast & Mold: Max 1,000 CFU/g
Coliforms: <10 CFU/g
E. Coli: Absent
Salmonella: Absent
Aflatoxins (B1, B2, G1, G2): Max 10 ppb
Contaminants & Adulterants:
Pesticide Residues: As per country-specific regulations (FSSAI, EU, FDA)
Heavy Metals:
Lead (Pb): <0.2 ppm
Cadmium (Cd): <0.1 ppm
Arsenic (As): <0.1 ppm
Mercury (Hg): <0.05 ppm
Artificial Additives & Preservatives: Must be absent
Foreign Matter: Max 0.5%
Applications of Ginger Powder:
Food Industry: Used in spice blends, soups, sauces, bakery products, and confectionery
Beverages: Used in herbal teas, masala chai, ginger ale, and health drinks
Pharmaceuticals & Ayurveda: Used in digestive aids, pain relief, and immune-boosting formulations
Cosmetics & Personal Care: Used in skincare, haircare, and aromatherapy products
Industrial Use: Used in herbal extracts, flavoring agents, and medicinal syrups
Pepper, also known as crushed red pepper, are derived from dried red chili peppers (Capsicum annuum or Capsicum frutescens) and are widely used as a seasoning in the food and spice industry. Below are the general specifications for chilli flakes:
Physical Properties:
Appearance: Coarse, crushed dried red chili flakes with visible seeds
Color: Bright red to dark red with yellowish-white seeds
Odor & Taste: Strong, pungent aroma with a hot, spicy taste
