High grade clean diesel for aricultute and tranport use Liters
EN590-10PPM Minimum Quantity: 25,000 Metric Tons per Month Maximum Quantity: 300,000 Metric Tons per Month CIF Price: Gross USD $400.00MT / Net USD $390.00MT FOB Price: Gross USD $380.00MT / Net USD $370.00MT
COMPONENT UNIT MIN MAX Density@ 20 deg C Kg/m3 0,840 Colour 1.10 Flash point, PMCC deg C ( C ) 66 69.0 Kinematics viscosity @20 degC C ST 3,0 6,0 Pour point deg C ( C ) (*) -10,0 Cloud point deg C ( C ) (*) -5,0 Mercaptan sulphur 0,004 Acidity, mg / 1000 cm3 5 Iodine number g/100g 6 Ash %wt 0.01 Total Sulphur %wt 0,005 0,02 Copper corrosion3 hrs@50 deg C (typical) 1 A CCR on 10% Residues %wt 0.20 Cetane index 45 Distillation range : 50% Recovered Volume deg C ( C ) 280 90% Recovered Volume deg C ( C ) 365.7 Bacteria MB Fibre / it 500 -Bacteria CFU Fibre / it 1000
TRANSACTION TERMS AND CONDITIONS: DELIVERY: CIF AWSP (Any World Safe Port). PAYMENT TERM: As stated on procedure PRODUCTS ORIGIN: RUSSIAN (but can be sold with non-Russian origin document) Inspection: SGS, CCIC, CIQ or Similar. Trial Shipments: Trial Shipments are obligatory for new clients. Payment: - As Stated on the Procedure Commissions: All Commissions are paid by seller and shared equally between buyer side and seller side intermediaries. DIESEL GAS Eastern Siberian Pacific Crude Oil (ESPO) Quantity: SPOT AND CONTRACT BASIS Price CIF Per Barrel Minimum Maximum 500,000 barrels 2,000,000 barrels USD$70 GROSS USD$65 NET LIGHT CYCLE OIL (LCO) Quantity: SPOT AND CONTRACT BASIS Price CIF Per MT Minimum Maximum 500,000 MT 2,000,000 MT USD$370 GROSS USD$350 NET DIESEL GAS ULTRA LOW SULFUR DIESEL EN590 10PPM Quantity: SPOT AND CONTRACT BASIS Price CIF Per Metric Tons Minimum Maximum 5,000 metric tons 100,000 metric tons USD$440 GROSS USD$420 NET DIESEL GAS Russian Petroleum Coke Quantity: SPOT AND CONTRACT BASIS Price CIF Per Metric Tons Minimum Maximum 10,000 metric tons 100,000 metric tons USD$180 GROSS USD$170 NET DIESEL GAS Russian Diesel 5000PPM Quantity: SPOT AND CONTRACT BASIS Price CIF Per Metric Tons Minimum Maximum 5,000 metric tons 100,000 metric tons USD$430 GROSS USD$420 NET AVIATION KEROSENSE GRADE 54 (JP54) Quantity: SPOT AND CONTRACT BASIS Price CIF Per Barrel Minimum Maximum 500,000 barrels 2,000,000 barrels USD$70 GROSS USD$65 NET DIESEL AVAITION FUEL GRADE A1 (JET A1) Quantity: SPOT AND CONTRACT BASIS Price CIF Per Barrel Minimum Maximum 500,000 barrels 2,000,000 barrels USD$70 GROSS USD$65 NET Russian VIRGIN FUEL D6 Quantity: SPOT AND CONTRACT BASIS Price CIF Per Gallon Minimum Maximum 1,000,000 Gallons 500,000,000 Gallons USD$0.85 GROSS USD$0.80 NET Russian Automotive Gas Oil (AGO) DIESEL GAS Quantity: SPOT AND CONTRACT BASIS Price CIF Per Metric Ton Minimum Maximum 5,000 MT 100,000 MT USD$480 GROSS USD$460 NET
En590 10ppm Non Sanctioned MOQ: 50K MT CIF or FOB
DIESEL EN 590 10 ppm Quantity: MINIMUM 20.000 MT MAXIMUM 200.000 MT X 12 MONTHS Price - $240 / 230USD Gross/Net ,per MT CIF ASWP Price - USD 220 / 210 $ per MT On FOB Basis : Novorossiysk/Vladivostok/Rotterdam/ Primorsk
DIESEL-GAS OIL L0.2-62 GOST 305-82 (Diesel D2) Origin Rusian Quantity MINIMUM 20.000MT MAXIMUM 2,000.000MT x 12 months Price - $ 260-250USD Gross/ Net per MT CIF ASWP Price: $ 210-200USD Gross/ Net per MT FOB: Rotterdam/ Novorossiysk/Vladivostok Price: $ 230-220USD Gross/ Net per MT FOB: Houston/ PRICE:20$/10 Minus NWE Platts NWE discount /only FOB NWE (Northwest European) Buyer Review Sellers SCO And Issues ICPO Along With Company Profile.
D2 diesel, also called Gasoil, is a fuel oil that is the second distillate derived from crude oil. D2 diesel products contain different levels of sulfur and require no reformers or additives to produce. The GOST variant (Russia) for Gasoil is 305-82 specifying the sulphur content of 0.02% max. D6 is also known as Residual Fuel Oil and is of high-viscosity. This particular fuel oil requires preheating to 220 - 260 Degrees Fahrenheit. D6 is mostly used for generators. D6 is a type of residual fuel, mainly used in power plants and larger ships. Mazut is a heavy, low quality fuel oil, used in generating plants and similar applications. ... is manufactured to GOST specifications, and has four level of sulphur , very low sulfur M100, low sulfur M100 , normal and high sulphur. and range of 0.005 and 0.035 sulfur, ISO Standard.
Biodiesel b100 FAME
BIODIESEL-100 We are offering Biodiesel-100, applied as additive to gas oil for yielding 20% Biodiesel, 80% gas oil mixture for optimum sustainability, safety and economic convenient burning. Moreover, we are also offering flexible and attractive delivery. Specifications (Meeting EN 14214 European Specifications): PropertyLimitsUnits Flash point, Closed up120 minDegrees C Water and Sediment0.05% volume Kinematic Viscosity, 40 degrees C1.9 - 6.0mm2/s Sulfated Ash0.02wt% Total Sulphur0.05wt% Copper Strip CorrosionNo. 3 max Cetane Number47 min Carbon Residue0.05 maxwt % Acid Number0.8 maxmg KOH/g Free glycerin0.02wt% Total Glycerin0.24wt% Phosphorus0.001wt% Vacuum Distillation End-point360 Degrres C max at T-90% distilled -
DIESEL ENGINE OIL SAE 40 & SAE 50 Description High performance heavy duty engine lubricants to be used by all diesel engines, based on a blend of high quality solvent refined mineral oils. We offer attractive INCO delivery and an advanced additive package meeting our standards. SAE 40 Physical Characteristics PropertyTest methodSAE 40 Density @ 15oC, g/cm3ASTM D 12980.8 0.98 Viscosity @ 100oC, cStASTM D 44512.5 16.2 Viscosity IndexASTM D 227090 min. Flash Point COC, oCASTM D 92190 min. SAE 50 Physical Characteristics PropertyTest methodSAE 50 Density @ 15oC, g/cm3ASTM D 12980.8 0.98 Viscosity @ 100oC, cStASTM D 44516.3-21.8 Viscosity IndexASTM D 227090 min. Flash Point COC, oCASTM D 92190 min. Packing 16 Liter, 20 Liter, or 200 Liter Containers Award ISO 9001/2008 Handling and Precaution Temperature should not exceed 50oC for long-term storage. -
We Supply EN590 10PPM , FOB price Payment 100% DLC/SBLC/TT, PB2%.
D2 & Gasoil : Product - D2 Total Contract Quantity- To Be Determined By The Buyer Origin - Russian Federation Inspection -by Sgs Or Equivalent At Loading Port At Sellers Cost Terms Of Delivery -cif-any Safe Port- Destination -as Per Contract Payment Term- Mt760/mt103 Final Payment Due Deligence-at The Expense Of Buyer Quantity-minimum 50 000 Mt/spot Or Contract Price- $-360 Usd Gross- $ 350 Usd Net Commission -seller Side : Us$5 ; Buyer Side: Us$5
(AMT AL) TTM in Malaysia Procedure Origin: Kazakhstan PRICE: EN 590: $540 per MT Jet A1: $84 per BBL TIER 1 TANKS PROCEDURE: For Vopak, VTTI, Kinder Morgan, and other top-tier tank storage facilities. We have readily available stock of EN590 10 PPM and Jet A1 on an FOB basis at Rotterdam, Houston, and Jurong. A face-to-face meeting can be arranged in Malaysia, contingent upon the approval of the following buyer documentation: 1. ICPO (Irrevocable Corporate Purchase Order) 2. CIS (Client Information Sheet) 3. ATV (Authority to Verify) for the Vopak Account Holder annual contract and spot deal are both doable Transaction Procedures FOB (VOPAK) 1. Buyer sends ICPO, Company profile, and ATV (REFINERY SOCAR, TCO, KSK) 2. The seller verifies buyerâ??s storage facility 3. Upon successful verification of buyer's storage facility, seller issues POP to buyer. 4. Buyer conducts dip test (Optional, at buyer's discretion) 5. The product is transferred into buyerâ??s tanks. 6. Buyer pays the full invoice via MT103 - TT. 7. Seller pays commissions to intermediaries within 24 hours of buyerâ??s payment. Note: The meeting can be arranged once the buyer's tank farm is approved by the seller. Only for TIER 1 tanks.
DIESEL EN590 10PPM
MOQ: 10,000 to 100,000 MT / Month
Product : EN590 10 PPM Origin: Kazakhstan Quantity: 100,000 MT / 500,000M with possible rolls and extensions FOB Rotterdam Origin: Kazakhstan Currency: USD Kindly contact us if you are interested.
we operate as a brokerage that has access to the following supply Diesel EN590 10ppm.
A very convenient procedure for buyers of En-590: This procedure and stock will not last long. Buyers must expedite the process to secure it. Only Singapore: Procedure: ( SINGAPORE ) 1.  Buyer submits TTCAP (Tank Terminal Clearance and Access Permit) 2.  Seller verifies and provides access code to communicate with seller tank farm. 3.  Buyer does Dip Test (at their own expense). 4.  Buyer prepares ICPO; seller returns with CI to be signed by buyer and seller. 5.  Upon successful Dip test, buyer pays full amount to seller and injection program start to buyers vessel/tank. Price: $607/ tonne All documents must be from the buyers who will make the payment and not third parties. Documents to be sent through email.
Fuel products available with very good procedure: Do not contact me with irrelevant enquiries. All enquiries must be related to the products below with official documents issued by the buyer. Without the required documents all emails will be rejected. Send documents with respective procedures included to adildoloo@gmail.com. ICPO must be in word document addressed to "End Seller" via Adidol Enterprises. Commission structure: (50% Buyer side/50% seller side). I'm on the buyer's side. Contract Term: 12 months minimum (with rolls and extensions) Payments Term: MT103 Inspection by: SGS/CIQ Delivery: FOB Rotterdam, Houston and Singapore JP54 JET FUEL: Trial Quantity: 2,000,000 Barrels Monthly Quantity: 4,000,000 Barrels Price per Barrel: $83 USD Commission : add your Commission. Aviation Turbine Fuel (A1) Trial Quantity: 2,000,000 Barrels Monthly Quantity: 4,000,000 Barrels Price per Barrel: $83 USD Commission : add your Commission. Diesel Fuel (EN590-10PPM) Trial Quantity: 200,000 Metric Tons Monthly Quantity: 200,000 Metric Tons Price per Metric Ton: $507 USD Commission : add your Commission. D6 Trial Quantity: 200,000,000 Gallons Monthly Quantity: 200,000,000 Gallons Price per Gallon: $0.83 /Gallon Commission : add your Commission. NON NEGOTIABLE FOB TRANSACTION PROCEDURE 1. Buyer issues an Irrevocable Corporate Purchase Order (ICPO) to the seller. 2. Seller provides a Commercial Invoice (CI) to the buyer. The buyer must sign this invoice and return it to the seller along with a Tank Storage Agreement (TSA). The TSA is crucial as it outlines the terms for storing the product in the buyer's tank farm. The seller then verifies the buyer's tank farm and makes a payment for a *3-day tank lease* to facilitate the injection process into the buyer's tanks. 3. The buyer is responsible for paying their *Tank Farm Company* for the 3 days of tank storage costs. After the Tank Farm Company confirms receipt of the seller's payment, the buyer's company will also pay for the 3 days of storage. This results in a total of *6 days of Tank Storage Reservation (TSR)*, ensuring that the product can be stored adequately before further processing. 4. The seller then injects the product into the buyer's tank. At this stage, the seller issues the necessary documentation, which includes the *SGS* (Soci�©t�© G�©n�©rale de Surveillance) report, an**Authorization to Verify (ATV), and an **Unconditional Dip Test Authorization (DTA)*. 5. The buyer conducts a *dip test* to verify the quantity and quality of the product injected into the tanks. After confirming, the buyer proceeds to make the payment for the total value of the product through an *MT103-TT transaction*. 6. The seller pays the intermediaries/brokers. Monthly shipments will continue as per the terms and conditions outlined in the SPA.
