Shape: Spherical Color: White / Color-Less Bulk Density: 1.5 -1.6g/cm3 Hardness: 5.5 - 6.0 Moh Finishing: Smoothing Melting Point: 600�°C Material: Clear glass Pattern: Solid Plain Packaging Size: 25 Kg / 50 Kg / 1 Ton Packaging Type: HDPE Woven Gunny Bags Transport Type: Land / Sea / Air Transport Application Surface finishing- Glass Bead blasting can be used on an extended range of substances with glass, plastic, metal, and rubber. The littler the glass spheres, the evener the surface; greater spheres produce an extra textured finish. To defend special areas or in detail aquatint resolves, areas can be effortlessly masked with tape. Cleaning- Glass Bead blasting eliminates foreign elements from the external without a dimensional alteration to the surface. A wide range of bead sizes is available. For example: removing paint, degreasing, light corrosion, and nearly any other surface pollutants. Glass beads may also be utilized to make surfaces for paint adhesion, gasket sealing, or lubrication retention. Deburring- Glass Bead blasting removes burrs, and feathered edges, and alternates from portions in an accuracy process. Corners and edges must be deburred with accuracy to assemble and operate correctly. Glass bead blasting promises that no base metal from the exterior is removed. Gentle and finished areas may be easily masked for protection. Shot peening- Peening with this type of abrasive is a less-cost form of generating an unchanging surface coating of crushed stress in alloy materials. Peening turns to combat stress cracks and rust, resulting in a growing life of metal portions. The high degree of chubbiness of our Glass Bead media progresses the performance of stress confrontation processes.
Material: Abrasive Garnet Sand Size: 0.25 - 2.5 MM Color: Reddish Specific Gravity: 4.0 - 4.1 Packaging Size: 25 Kg / 50 Kg / 1 Ton Packaging Type: HDPE Woven Gunny Bags Transport Type: Land / Sea / Air Transport Sandblasting with Abrasive Garnet Sand - During the surface preparation process, Abrasive garnet is blasted onto the surface of the steel using high-pressure compressed air. It can be found in high-quality coated and bonded abrasives such as abrasive papers, clothing, and wheels. Abrasive garnet sand is a mineral-free, iron-free substance with a wide range of applications. High-pressure water jet cutting is its primary application as abrasive sand. Garnet sand is a good abrasive and a common sandblasting replacement for silica sand. Rounder Garnet Sand is better suited for such blasting treatments.
Loose, Single Crystal, Yttrium lron Garnet (YIG)spheres, Diameter1.000±0.035 mm, 1780± 25 Gauss, with 0.3 micro surface finish and annealed
Garnet sand is mostly used for #sandblasting, #waterFiltration, #Waterjet Cutting & Abrasive papers. It is also used in the preparation of non-skid tracks, steps, sports Ground Surface. It is also used as abrasive media in Coated abrasives like Grinding Wheels and belts that are used in cleaning/polishing various surfaces like glass, ceramics, wood & metals. We are Manufacturing and supplying a Prime qualitative product at the best price. We are currently exporting our product in Europe, the United State of America, Canada, South Korea, UAE, Qatar, and various countries. We have #Garnetabrasive with below mesh size #20_40 #30_60 #12_24 and #60_80 #120 We are looking for a long term partnership with International traders, stockists & buyer companies. We can assure you prime quality products at very attractive price. #waterjetcutting #abrasives #garnet #sand #naturalabrasive #sandblasting #waterfiltration For more information
Garnet sand is mostly used for #sandblasting, #waterFiltration, #Waterjet Cutting & Abrasive papers. It is also used in the preparation of non-skid tracks, steps, sports Ground Surface. It is also used as abrasive media in Coated abrasives like Grinding Wheels and belts that are used in cleaning/polishing various surfaces like glass, ceramics, wood & metals. We are Manufacturing and supplying a Prime qualitative product at the best price. We are currently exporting our product in Europe, the United State of America, Canada, South Korea, UAE, Qatar, and various countries. We have #Garnetabrasive with below mesh size #20_40 #30_60 #12_24 and #60_80 #120 We are looking for a long term partnership with International traders, stockists & buyer companies. We can assure you prime quality products at very attractive price. #waterjetcutting #abrasives #garnet #sand #naturalabrasive #sandblasting #waterfiltration
SIZE:PWA/WCA40 PWA/WCA35 PWA/WCA30 PWA/WCA25 PWA/WCA20 PWA/WCA15 PWA/WCA12 PWA/WCA09 PWA/WCA05 PWA/WCA03 PWA/WCA IS A White Calcined Aluminum Oxide Abrasive Powder Consisting Of Plate-shape Crystal Of Aluminum Oxide(al2o3) With High Purity More Than 99% And Concentrated PSD.
Emery sand for glass sandblasting AVERAGE CHEMICAL COMPOSITION(TYPICAL) Al2O3 60-70% SiO2 6-10% Fe2O3 2-5% TiO2 1.5-2% MnO 3-5% K2O 1-2% CaO 1-2% PHYSICAL PROPERTIES(TYPICAL) Shape Round Color Yellow Broken Rate 8% under 52Mpa Mohs Hardness 6-7 Roundness 0% ADVANTAGES high hardness Good liquidity No dust Wear resistance the minimal mutual friction force Well-distributed size PACKAGING 25kgs PVC bags+1MT big bag
Brown fused aluminum oxide, otherwise known as Brown Fused Alumina or BFA, is produced through an electric arc furnace process. Brown fused aluminum oxide is both a hard (Mohs hardness 9) and tough material with high strength, making it an excellent abrasive grain raw material for applications such as blast media, sandpaper, grinding wheels and abrasive discs, rolls, belts and pads. Its thermal properties make it an excellent raw material for refractory applications, as well. Because Brown Fused Aluminum Oxide has a high bulk density and high hardness making it the perfect media for removing rust, mill scale, and surface contamination. The consistent particle size allows for a uniform surface finish and coverage. Additionally, BFA has a low friability which allows it to be recirculated on average, up to seven times. These characteristics reduce abrasive consumption, clean up, and disposal costs, increasing profitability.
spec:Al2O3: >95%, SiO2:
white fused alumina Al2O3: >99%, SiO2:
CHEMICAL COMPOSITION Fe2O3: 25-31% Al2O3:17-21% MgO:5-6% SiO2:34-40% CaO:5.0-10.0% MnO:0-1.0% PHYSICAL PROPERTIES Specific Gravity:3.8-4.1g/cm3 Bulk Density:1.8-1.9 g/cm3 Hardness (Mohs):7.5-8.0 Melting point:1300 C Grain shape:Sharp, Angular Chloride content 25ppm Acid solubility(HCL) 1% Conductivity 25 ms/m Toxic substances:None AVAILABLE SIZES 10-20mesh 20-40mesh 30-60mesh 80mesh PACKING 25kgs pvc bags 1mt big bag or 1mt big bag
CHEMICAL COMPOSITION Fe2O3: 25-31% Al2O3:17-21% MgO:5-6% SiO2:34-40% CaO:5.0-10.0% MnO:0-1.0% PHYSICAL PROPERTIES Specific Gravity:3.8-4.1g/cm3 Bulk Density:1.8-1.9 g/cm3 Hardness (Mohs):7.5-8.0 Melting point:1300 C Grain shape: Sharp, Angular Chloride content 25ppm Acid solubility(HCL) 1% Conductivity 25 ms/m Toxic substances:None
We are leading manufacturers & suppliers of Garnet Abrasive Sand across the globe since last 50 years. With the 100% satisfied Customer Portfolio, we aim to supply best quality material at highly competitve prices and immediate deliveries. Feel free to contact us for your valuable enquiries. We shall be highly obliged to serve your esteemed concern.
Form: Small roll like 120mm x 50M Sheet 23x28cm
A flap barrier works with a fare collection system for public services where entry is strictly for paid visitors. The barrier controls the human traffic allowing only paid entries. The flaps open only when the visitors produce tickets to the service. Found in Metro/Bus stations, the flap barriers provide real help in controlling human movement. Improves security at busy public service stations Integrated with the access control device Collects fare through an electronic system Works automatically â?? flap opens only for a certain time Strengthens the fare collection system Ensures disciplined human traffic movement Requires no physical monitoring Works on a DC motor Energy efficient
Material: aluminum oxide color: brown Application: for iron, steel, stainless steel, cast iron, aluminum, wood, plastic and other nonmetals. Advantage: high elasticity, good self-sharpening, high grinding rate and low noise
Our company produce frit what used for manufacturing CBN and Abrasive wheel. Hermetic or solder seals.
Products are to cut INOX, metal pipes, stones, carbon and alloy steel, nonferrous alloys, railways, rounds, framing, stones and etc. Cutting-off wheels are an effective tool for processing mineral and synthetic materials. Abrasive wheels can be used for all types of grinding, excessing metal elimination, weld joint and burr grinding. LLC â??TVC â??UKRABRAZIVâ?? is certified and meets the requirements of ISO 9001:2009. Our products are manufactured in compliance with EN 12413, EN 13743 and DSTU GOST 21963:2003. We produce high performance abrasive cutting-off and grinding wheels based on fiberglass impregnated with phenol-formaldehyde resin of various diameter (from 115 to 400mm) and thickness (from 0.8 to 10 mm) which provide maximum quality of performed work, cutting of different materials with precise sawing. Our cutting, grinding wheels and flap discs are characterized by long-term service, high cutting value and G-ratio, high efficiency and safety securing.
Brown Fused alumina is bauxite, coke, anthracite as main raw materials, made more than 2000 degrees high temperature melting, hitches in arc through the mill grinding, plastic, magnetic separation to iron, screen is divided into a variety of particle size, dense texture, high hardness, particle formed globular.High consolidation is suitable for making ceramic, resin abrasive and grinding, polishing, sandblasting, precision casting, etc., can also be used for manufacturing advanced refractories
China Origin High Quality green silicon carbide for spectralite Surface polishing Green silicon carbide is made of quartz sand, petroleum coke (or coal char), salt and other raw materials through high temperature smelting by resistance furnace, Green Silicon Carbide have high rigidity with strong cutting force, steady chemical property, and good capacity of heat-transmission and metal-cutting.
