Find Verified Abrasives Suppliers, Manufacturers and Wholesalers

The technical ceramic alumina ball with the characteristics of high density,high hardness,low abrasion,good anti-seismic stability, corrosion resistanceis which can improve the ball milling efficiency of the ball mill, reduce the pollution of glaze slurry, improve the product quality and economic benefits of the enterprise that is made of selected high-quality raw materials, advanced molding technology and calcined in high-temperature tunnel kiln at 1600 �ºC. It is an ideal grinding medium for processing glazes, billets and various mineral powders.
The technical ceramic alumina ball is used in the grinding process of ceramic glaze, including the grinding process of ball mill. The semi-finished glaze slurry after grinding by ball mill is put into the mixing mill for fine processing, so that it becomes glaze. Or put the glaze powder directly into the agitation mill for fine processing to make it into glaze.
We can supply 65-70% alumina content classified as medium alumina ball, 75% - 80% alumina content called medium high alumina ball, and more than 90% alumina content is high alumina ball. Among them, the high alumina ball is subdivided into 90% porcelain, 92% porcelain, 95% porcelain and 99% porcelain.

Product details:
1. Frosted cover board
high temperature resistant, explosion-proof frosted technology, the latest glue filling technology provide workers more safety protection.
2. High temperature calcined emery cloth is a kind of emery cloth with high temperature treatment, used for making flap disc . The grinding rate is sharp. Feel light, spark life is higher than ordinary emery cloth, grinding rate is improved.
3. Application:
The flap disc is used in metal, wood and other industries for grinding and finishing complex surface. It uses vulcanized fiber as basic material, high-grade abrasive cloth as grinding
materials, it is made by special process, builted in angle grinder, use for grinding iron, nonferrous metal, stainless steel ,stone and plastic, weld, and removing burr and flashing in impact parts.
It has the advantages of good elasticity, good self-sharpening, high grinding efficiency, good heat dissipation, low noise and long service life.

Backing: Plastic and fiberglass
Number of sheet: 72 sheet
Packing Details: 10pcs/shrink, 300pcs/ctn
Grit: 50# 60# 80# 120# 150# 180# 240# 320#

Crimped wire cup brush 3, 4 4 1/2, 5, 6
Twist knot wire cup brush 75mm, 90mm, 100mm, 125mm, 150mm
Crimped wire wheel brush steel wire or stainless steel wire
Bench wheel wire wheel brush 125mm, 150mm, 180mm, 230mm, 300mm, 350mm
Cup wire brush for electric drill 38mm, 50mm, 63mm, 75mm, 80mm, 100mm
Brass end brush 1-1/2 inch, 2 inch, 2-1/2 inch. 3 inch, 3 1/8 inch
plastic handle wire brush
Wood handle wire brush

This kind of white fused alumina electrically fused in arc furnace with high grade processed alumina as raw material. It has higher hardness and slight lower toughness comparing with brown fused alumina.It is also characterized by its high purity, ability of self-sharpening, better cutting, less heat emit, higher efficiency, acid and alkali resistance, good thermal stability. As the abrasive materials, it is suitable for grinding high-speed, high carbon steel, as loose grains, it widely used for bonded and coated abrasives,polishing, precision casting and so on.

Package:

1 MT big bag or 25kg paper bag *40 bags on one pallet ;As per customers requirement

Particle size :

F8, F10, F12, F14, F16, F20, F22, F24, F30, F36, F40, F46, F54,F60, F70, F80, F90, F100, F120, F150, F180, F220

And 0-1mm1-3m,3-5mm5-8mm200mesh-0320mesh-0

We will provided FREE SAMPLE about 1kg.

Welcome to ask for free samples.

From the day of our commencement, we are engaged in manufacturing and supplying of Brown Fused Alumina. Known for their features like optimum hardness, tough and sharp abrasives, these are suitable to grind high tensile metals. Our offered Brown Fused Alumina is tested on various quality parameters to ensure effectiveness. Moreover, these are used in manufacturing of grinding wheels, refractory products, micro blasting applications, surface hardening, general abrasives applications etc. Customers can avail these from us in desired quantity and at market competitive rates.

Remark: specification and size can be optimized by per customer' requirement
Packing: 1 MT big bag or 25kg paper bag *40 bags on one pallet ;
As per customers requirement

FAQ :
Q1. Will the FREE SAMPLES be provided for buyers?
- YES. We will provided FREE SAMPLE about 1kg
Q2. How about the express fee?
- Our companys policy is the buyer pay for express fee.
Q3. Is there QUALITY REPORT for the products?
- YES. We provide quality report of our company or CIQ,SGS according to clients requirements

Brown Fused Alumina is fused and crystallized under the high temperature of above 2250°C with high quality abrasive bauxite as raw material.It is characterized by good self-sharpening and high grinding ability. Brown Fused Alumina can produce ceramic grinding wheel ,resin grinding wheel.And BFA could be used for abrasive,sandblasting and precision casting.

Brown fused alumina for Abrasive SandblastingPrecision casting advantages:

1) Not affecting the color of the processing cases.

2) Sandblasting in the non-iron process.

3) High speed processing.

4) Very low amount of iron oxide, suitable for non-ferrous blasting

operations.

Brown fused alumina for refractory advantages:

1) High quality bauxite as raw material

2) Refractory temperature is more than 1900°C

3) No burst,no pulverization and crack in the using course of refractory

4) Very low amount of iron oxide

Brown Fused Alumina for AbrasiveSandblastingPrecision casting

Packing: 1 MT big bag or 25kg paper bag *40 bags on one pallet ;As per customers requirement

Remark: specification and size can be optimized by per customer' requirement

FAQ :

Q1. Will the FREE SAMPLES be provided for buyers?

- YES. We will provided FREE SAMPLE about 1kg

Q2. How about the express fee?

- Our companys policy is the buyer pay for express fee.

Q3. Is there QUALITY REPORT for the products?

- YES. We provide quality report of our company or CIQ,SGS according to clients requirement

150*25*16mm aluminum oxide abrasive flap wheel

150*25*16mm aluminum oxide abrasive flap wheel

150*25*16mm aluminum oxide abrasive flap wheel

Abrasive


1 ton per woven bay or 25kg per paper bag

Alumina hollow ball is a new kind of high temperature heat insulation material, it is placed in the industrial alumina content of more than 98% in the arc furnace high temperature melting, using compressed air to blow liquid alumina into air ball alumina hollow ball.Alumina hollow ball can be made into various shapes of products, the highest temperature of 1800 degrees Celsius, the mechanical strength of the products is high, several times of the general light products, and the volume density is only half of corundum products.

The characteristics:
It is characterized by high melting point, good thermal stability, high hardness, good wear resistance, high mechanical strength, good electrical insulation and corrosion resistance

Application:
Widely used for finalizing, non-finalizing refractory materials, refractory casting binder, wear-resisting abrasive tools, high purity refractory fiber, special ceramics, electronic ceramics, structural ceramics, stainless steel, granite and other decorative materials mirror polishing.It can meet the requirements of users with different USES and different process conditions.

Zircon Corundom Mullite bricks are made of raw materials such as high-grade mullite grog and Australia imported zircon sand, which is melted and casted in high temperature electric furnace. It is mainly used in areas that require high abrasion and temperature resistance, such as gliding rail bricks in steel pusher metallurgical furnace, the tapping platform (tapping spout) fortapping platform (tapping spout)style walking beam furnaces, and also as the interior for destructors.

Application: Suitable for cutting common carbon steel, tool steel, building material, cast iron, etc.
Machine: Used on stationary type cutting machine.
Usage: Cutting all kinds of solid material, sheet metal, angle iron and pipe, etc.
Advantage: Good shock resistance, high cutting efficiency, long service life, cost effective.
Specifications:
SIZE(DHd) SIZE(DHd) ABRASIVE GRIT HARDNESS MAX. R.P.M. Standard Packaging
250X2.5X25.4 10"X1/10"X1" A 36 Q 6100 50
300X3X25.4 12"X1/8"X1" A 36 Q 5100 25
350X3X25.4 14"X1/8"X1" A 30 Q 4400 25
4003.232 16"X1/8"X1" A 30 Q 3800 25
According to customer's requirements.

Hello Sir,

How are you?

This is Rita from Zhengzhou Yuhong Abrasive Co.,ltd.

Our company is an Abrasive Disc factory in China for more than 20 years. We supply Cutting disc, Grinding disc, Flap disc, all for metal finishing and polishing.

If you interest to buy disc, welcome to send enquiry to us, with details of which size in need? how many quantity (pieces) in need? shipping to which seaport or location?
We will give quotation soon upon your reponse.

Application: Suitable for cutting common carbon steel,tool steel,cast iron, etc.
Machine:Used on portable angle grinder
Usage: Grinding weld,cleaning burr & rust,surface polishing, etc.
Advantage: High grinding efficiency, long service life, high cost performance, comfortable for operator.
Specifications:
DHd DHd ABRASIVE GRIT HARDNESS MAX. R.P.M. Packaging
100X4X16 4"X1/6"X5/8" A 46 Q 15200 280
100X6X16 4"X1/4"X5/8" A 30 Q 15200 200
125X6X22 5"X1/4"X7/8" A 30 Q 12200 100
150X6X22 6"X1/4"X7/8" A 24 Q 10200 100
180X6X22 7"X1/4"X7/8" A 24 Q 8500 80
According to customer's requirements.

We can offer Garnet abrasive with mesh size 20/40 30/60 12/24 and 60/80 from India

FOB hazira/mundra

Strong Backing
Robust Backing
Flexible Backing
Very Flexible Backing
Paper Backing

Application: For cutting common carbon steel, tools steel, stainless steel, hard alloy, nonferrous metals, building material, etc.
Machine: Used on portable angle grinder.
Usage: grinding weld, cleaning burr & rust, etc.
Advantage: perfect grinding performance, low vibration, comfortable handle.
Specifications:
DÃ?d DÃ?d ABRASIVE GRIT MAX. R.P.M. Standard Packaging
100X16 4"X5/8" ZA 60#/80#/100# 15200 300
125X22.2 5"X7/8" ZA 60#/80#/100# 12200 300
150X22.2 6"X7/8" ZA 60#/80#/100# 10200 180
180X22.2 7" X7/8" ZA 60#/80# 8500 180

Application: Suitable for cutting alloy steel, stainless steel, galvanized products, etc.
Machine: Used on stationary type cutting machine
Usage: Cutting all kinds of solid material, sheet metal, angle iron and pipe, etc.
Advantage:Â good shock resistance, high cutting efficiency, long service life, cost effective.
Specifications:
SIZE( d) SIZE( d) ABRASIVE GRIT HARDNESS MAX. R.P.M. Standard Packaging
250X2.5X25.4 10"X1/10"X1" WA 36 Q 6100 50
300X3X25.4 12"X1/8"X1" WA 36 Q 5100 25
350X3X25.4 14"X1/8"X1" WA 30 Q 4400 25
4003.232 16"X1/8"X1" WA 30 Q 3800 25
According to customer's requirements.

Melfort Abrasives and Tools has been a leading manufacturer of velcro backing pad and supplier of various other types of abrasives and cutting tools in India. Over the years, we have grown into an enterprise offering a wide range of products across multiple categories. Some of our leading products include Diamond cutting disc, Wood cutting disc, Velcro disc and Sanding fiber disc etc.