Brown Fused Alumina F36 Used For Boat Sandblasting Brown Fused Alumina is fused in the electric-arc furnace under the high temperature of above 2250�°C with high quality bauxite as raw material and matched by the carbon material and scrap iron .Then, it was crushed by autogenous mill, removed the iron through magnetic separation, screened to variety granularity. we product 4 grades brown fused alumina, with different al2o3 content, grade A: Al2O3 92-96%,Fe2O3 0.2-1.0%,SiO2 1.0-3.0%,TiO2 1.5-3.8%. grade B: Al2O3 85-90%,Fe2O3 6-10%,SiO2 1.5-4%,TiO2 2-4%. grade C: Al2O3 70-80%,Fe2O3 8-15%,SiO2 2-5%,TiO2 3-5%. grade D: Al2O3 55-65%,Fe2O3 12-20%,SiO2 15-25%,TiO2 4-6%. Advantages: 1.High hardness and high purity. 2.Corrosion resistance. 3.Grinding performance is good. 4.The applicable scope is wide. 5.The price is cheap. 6. Good wear-resisting performance,resist to shock
B-GRADE Brown Fused Corundum 46# As Sand Blasting Material Brown Fused Alumina is fused in the electric-arc furnace under the high temperature of above 2250�°C with high quality bauxite as raw material and matched by the carbon material and scrap iron .Then, it was crushed by autogenous mill, removed the iron through magnetic separation, screened to variety granularity. we product 4 grades brown fused alumina, with different al2o3 content, grade A: Al2O3 92-96%,Fe2O3 0.2-1.0%,SiO2 1.0-3.0%,TiO2 1.5-3.8%. grade B: Al2O3 85-90%,Fe2O3 6-10%,SiO2 1.5-4%,TiO2 2-4%. grade C: Al2O3 70-80%,Fe2O3 8-15%,SiO2 2-5%,TiO2 3-5%. grade D: Al2O3 55-65%,Fe2O3 12-20%,SiO2 15-25%,TiO2 4-6%. Advantages: 1.High hardness and high purity. 2.Corrosion resistance. 3.Grinding performance is good. 4.The applicable scope is wide. 5.The price is cheap. 6. Good wear-resisting performance,resist to shock
Brown Corundum F36 Price Used For Cutting Wheel Brown Fused Alumina is fused in the electric-arc furnace under the high temperature of above 2250°C with high quality bauxite as raw material and matched by the carbon material and scrap iron .Then, it was crushed by autogenous mill, removed the iron through magnetic separation, screened to variety granularity. we product 4 grades brown fused alumina, with different al2o3 content, grade A: Al2O3 92-96%,Fe2O3 0.2-1.0%,SiO2 1.0-3.0%,TiO2 1.5-3.8%. grade B: Al2O3 85-90%,Fe2O3 6-10%,SiO2 1.5-4%,TiO2 2-4%. grade C: Al2O3 70-80%,Fe2O3 8-15%,SiO2 2-5%,TiO2 3-5%. grade D: Al2O3 55-65%,Fe2O3 12-20%,SiO2 15-25%,TiO2 4-6%. Advantages: 1.High hardness and high purity. 2.Corrosion resistance. 3.Grinding performance is good. 4.The applicable scope is wide. 5.The price is cheap. 6. Good wear-resisting performance,resist to shock.
White Sintered Tabular Alumina 0-1MM For Refractory Material Description: Tabular alumina is made of Al2O3, after ingredients, grinding and forming, smelting in high temperature furnace turned to �±- Al2O3. Al2O3% 99.3 SiO2% 0.1 Fe2O3 0.02 Na2O 0.4 Volume density (g/cm3) :3.5 water absorption: 1.3% apparent porosity: 3.2% Production Capcity: 15000tons/year.
Sintered tabular corundum 3-5mm from sicheng abrasive Description: Tabular alumina is made of Al2O3, after ingredients, grinding and forming, smelting in high temperature furnace turned to �±- Al2O3. Al2O3% 99.3 SiO2% 0.1 Fe2O3 0.02 Na2O 0.4 Volume density (g/cm3) :3.5 water absorption: 1.3% apparent porosity: 3.2% Production Capcity: 15000tons/year.
ISO standard China 0-0.3mm sintered tabular alumina Description: Tabular alumina is made of Al2O3, after ingredients, grinding and forming, smelting in high temperature furnace turned to �±- Al2O3. Al2O3% 99.3 SiO2% 0.1 Fe2O3 0.02 Na2O 0.4 Volume density (g/cm3) :3.5 water absorption: 1.3% apparent porosity: 3.2% Production Capcity: 15000tons/year.
white tabular alumina (99.3% AL2O3) 0-1mm,1-3mm used for refractory brick Description: Tabular alumina is made of Al2O3, after ingredients, grinding and forming, smelting in high temperature furnace turned to �±- Al2O3. Al2O3% 99.3 SiO2% 0.1 Fe2O3 0.02 Na2O 0.4 Volume density (g/cm3) :3.5 water absorption: 1.3% apparent porosity: 3.2% Production Capcity: 15000tons/year.
High quality tabular alumina 0-1-3-5-8mm used for refractory material Description: Tabular alumina is made of Al2O3, after ingredients, grinding and forming, smelting in high temperature furnace turned to �±- Al2O3. Al2O3% 99.3 SiO2% 0.1 Fe2O3 0.02 Na2O 0.4 Volume density (g/cm3) :3.5 water absorption: 1.3% apparent porosity: 3.2% Production Capcity: 15000tons/year.
Sintered corundum 0-0.5mm Tabular alumina TBA Price Description: Tabular alumina is made of Al2O3, after ingredients, grinding and forming, smelting in high temperature furnace turned to �±- Al2O3. Al2O3% 99.3 SiO2% 0.1 Fe2O3 0.02 Na2O 0.4 Volume density (g/cm3) :3.5 water absorption: 1.3% apparent porosity: 3.2% Production Capcity: 15000tons/year.
Refractory material tabular alumina 99.3% AL2O3 0-0.5mm Description Tabular alumina is made of Al2O3, after ingredients, grinding and forming, smelting in high temperature furnace turned to �±- Al2O3. Al2O3% 99.3 SiO2% 0.1 Fe2O3 0.02 Na2O 0.4 Volume density (g/cm3) :3.5 water absorption: 1.3% apparent porosity: 3.2% Production Capcity: 15000tons/year.
Tabular Alumina Price Description Tabular alumina is made of Al2O3, after ingredients, grinding and forming, smelting in high temperature furnace turned to �±- Al2O3. Al2O3% 99.3 SiO2% 0.1 Fe2O3 0.02 Na2O 0.4 Volume density (g/cm3) :3.5 water absorption: 1.3% apparent porosity: 3.2% Production Capcity: 15000tons/year.
Good prices 80 mesh sand garnet for water jet cutting Garnet, the popular abrasives for waterjet cutting, blasting cleaning,water filtration, bonded abrasive, anti-slipping material, athletic field, polishing abrasive and other applications. Physical characteristics of Garnet Physical Items Grains Color Red Brown Toxicity None Melting Point 1300°C Solubility in Water Not Soluble in Water Specific Gravity 3.90-4.10 g/cm3 Conductivity Less Than 125us/cm Mohs Hardness 7.5 Average Chemical composition of Garnet SiO2 37.09% Al2O3 20.11% FeO 29.73% Fe2O3 1.83% TiO2 0.46% MgO 5.26% CaO 2.09% MnO 1.19% The usage: 1. Free grinding and polishing. 2. Resin abrasives. 3. Coated abrasives. 4. Sandblasting. 5. Waterjet cutting. 6. Water filtration. 7. Stone washing. 8. Surface preparation
filtration Usage and Garnet Material garnet sand 20-40 Garnet, the popular abrasives for waterjet cutting, blasting cleaning,water filtration, bonded abrasive, anti-slipping material, athletic field, polishing abrasive and other applications. Physical characteristics of Garnet Physical Items Grains Color Red Brown Toxicity None Melting Point 1300°C Solubility in Water Not Soluble in Water Specific Gravity 3.90-4.10 g/cm3 Conductivity Less Than 125us/cm Mohs Hardness 7.5 Average Chemical composition of Garnet SiO2 37.09% Al2O3 20.11% FeO 29.73% Fe2O3 1.83% TiO2 0.46% MgO 5.26% CaO 2.09% MnO 1.19% The usage: 1. Free grinding and polishing. 2. Resin abrasives. 3. Coated abrasives. 4. Sandblasting. 5. Waterjet cutting. 6. Water filtration. 7. Stone washing. 8. Surface preparation
Garnet grit 30/60# sand blasting material Garnet, the popular abrasives for waterjet cutting, blasting cleaning,water filtration, bonded abrasive, anti-slipping material, athletic field, polishing abrasive and other applications. Physical characteristics of Garnet Physical Items Grains Color Red Brown Toxicity None Melting Point 1300°C Solubility in Water Not Soluble in Water Specific Gravity 3.90-4.10 g/cm3 Conductivity Less Than 125us/cm Mohs Hardness 7.5 Average Chemical composition of Garnet SiO2 37.09% Al2O3 20.11% FeO 29.73% Fe2O3 1.83% TiO2 0.46% MgO 5.26% CaO 2.09% MnO 1.19% The usage: 1. Free grinding and polishing. 2. Resin abrasives. 3. Coated abrasives. 4. Sandblasting. 5. Waterjet cutting. 6. Water filtration. 7. Stone washing. 8. Surface preparation
garnet sand blasting rock garnet sand 20-40/30-60# Garnet, the Chinas and worlds popular abrasives for waterjet cutting, blasting cleaning,water filtration, bonded abrasive, anti-slipping material, athletic field, polishing abrasive and other applications. Physical characteristics of Garnet Physical Items Grains Color Red Brown Toxicity None Melting Point 1300°C Solubility in Water Not Soluble in Water Specific Gravity 3.90-4.10 g/cm3 Conductivity Less Than 125us/cm Mohs Hardness 7.5 Average Chemical composition of Garnet SiO2 37.09% Al2O3 20.11% FeO 29.73% Fe2O3 1.83% TiO2 0.46% MgO 5.26% CaO 2.09% MnO 1.19% The usage: 1. Free grinding and polishing. 2. Resin abrasives. 3. Coated abrasives. 4. Sandblasting. 5. Waterjet cutting. 6. Water filtration. 7. Stone washing. 8. Surface preparation
This is the Flap disc of our company. If you are interested, please contact me,I can provide more detailed information and samples.
Blasting Abrasive & Spares - Airless spray machines & spares - Blasting pots & spares - Garnet - Copper Slag Grit - Steel Grit & Steel Shots
Blast cleaning of cast steel grit: Used for blast cleaning of casting, dye-casting, forging, sand removal of casting, steel plate, H type steel, steel structure. Rust removal of cast steel grit: Rust removal of casting, forging, steel plate, H type steel, steel structure, descaling of forging. Shot blasting of cast steel grit: Shot blasting of profile steel, ship board, steel board, steel material. Shot blasting of cast steel: Shot blasting of steel board, profile steel, steel structure. Pre-treatment of cast steel grit: Pre-treatment of surface, steel board, profile steel, steel structure, before-painting
Arij Global Trading & Marketing supplies Garnet Abrasive wish mesh size of 20/40 and 80 for Sandblasting and waterjet cutting. In order to receive a specification and quotation, please contact us.
"Our metal bond mesh diamond combines both using life and working efficiency. Suitable for resin bond, vitrified bond, metal bond, and electroplated bond system. Application: glass, PCD/PCBN, dental tools, gemstone EA-M19 Medium toughness, Irregular shape, new cutting edges always occur during the grinding process. The texture surface offers good bond combining ability. For resin bond and Vitrified bond system Available Sizes: 60/70 through 500/600 It is also available in Ni coating EA-M20 Medium Toughness, Rough and Irregular crystal, Similar to EA-M19, but more durable. For resin bond and Vitrified bond system Available sizes: 80/100 through 500/600 It is also available in Ni coating EA-M35 Medium-High Toughness, Angular shape. Excellent free cutting ability and more durable than EA-M40. For resin bond and Vitrified bond system Available sizes: 30/40 through 120/140. It is also available in Ni coating EA-M40 Medium toughness, Angle crystal, Friable. Excellent free cutting ability. For Resin bond, Electroplated and Vitrified bond system. Available Sizes: 30/40 through 500/600 It is also available in Ni coating EA-M45 High Toughness, Semi-blocky It combines the long using life and high working efficiency. For Resin Bond system, Vitrified bond system, Electroplated tools. Available Sizes: 40/50 through 500/600 It is also available in Ni coating and Ti coating. EA-M50 High Toughness, Blocky Durable provides the shining surface on the workpiece. For Resin Bond system, Vitrified bond system, Electroplated tools. Available Sizes: 40/50 through 500/600 It is also available in Ni coating and Ti coating. Available sizes:"
