Rcrcm typhoon- rc sailplane Typhoon x tail: a 2-metre rocket ship! Typhoon earned its name because it was designed during the worst part of the strongest typhoon to hit taiwan in the last decade. Trust me ¡§c it was scary. Aimed at the flyer who has made his bones on smaller ships and now wants something with higher potential, the typhoon offers sparkling slope performance, but turns into a pussycat when thermalling. For experienced flyers, the plane handles like a dream, has no vices and yet is capable of amazing performance in the right hands. Able to fly in almost any conditions and equipped with a full house complement of ailerons, rudder, elevator and flaps, the typhoon can perform leisurely aerobatics or be made into a hair-raising, jaw-aching rocket by the addition of ballast, yet it will slow down to hand-catch speed for landings. Made from cnc generated moulds, and supplied with a full kit of small parts and a massive 20mm ballast tube, typhoon is constructed to the highest standards of fit and finish. Typhoon is a real all-rounder, yet it will fit on the parcel shelf of most cars. Design by rcrcm aero team Specifications: Span: 2.0m length: 1.2m weight: 950g wing aerofoils: rc blended. Tail aerofoil: sd8020 Typhoon instruction manual. Typhoon x tail: an electric 2-metre rocket ship!. Typhoon hardwares. In carton
Since the original sailplane version has been very well received by the discerning flying community, we felt justified in taking the next logical to extend its performance to allow our amp addicts to have a stir. So we re-designed the fuselage to allow for some ¡°grunt in the front¡±! Probably not intended as a very first electric sailplane, the typhoon does offer sparkling performance, but is an easy fly when thermalling. For experienced flyers, the plane is very agile, goes where it is told and generally handles like a dream.. Able to fly in almost any conditions and equipped with a full house complement of ailerons, rudder, elevator and flaps, plus the electrics, the typhoon can perform leisurely aerobatics or be made into a hair-raising, jaw-aching rocket by opening up the power, yet it will slow down to hand-catch speed for landings. Rudder and elevator control servos are located in a well just behind the wing leaving the front end completely open for electrics, battery, motor installation etc. Made from cnc generated moulds, and supplied with a full kit of small parts, typhoon is constructed to the highest standards of fit and finish. Typhoon is a real all-rounder, yet it will fit on the parcel shelf of most cars. Design by rcrcm aero team. Options include: Wing/tail/fuselage protective bags Wing wiring harness Specifications: Span: 2.0m Length: 1.2m Empty weight: 950g Flying weight: 1400g Wing aerofoils: rc blended Tail aerofoil: sd8020. In carton
We specialized in aviation gifts and plane models, including resin plane models, metal plane models, plastic plane models from 9-500cm. We can customize the model plane as your requested size, logo design, material etc., We will offer our best services for you and look forwards to have the long term business cooperations with you. We welcome the OEM or ODM orders.
Emulational plane model a340-600 Shantou tongde airplane model factory specializes in the production of emulational plane models. Our products are mostly made of resin which is the main material. Meanwhile we also produce plastic material, zincic metal and wooden plane model. The size of our models are from 9cm to 350cm. There are various types, such as civil aviation plane, battleplane, business plane, lateral plane etc. And also many plane models of various scale, which could meet customers'different demands.
The size of our models are from 9cm to 350cm. There are various types, such as civil aviation plane, battleplane, business plane, lateral plane White box/present box
Emulational plane model f-100 The size can be made as per clients' request
Airbus a380 Goods no: Proportion: Spc:44.5cm Packaging: Stock quantity:500 Retail price:rrmb320 Products material:resin products
R/c model airplane Non-tail delta wing Detailed die-cast eps body Flexible flying with perfect invert flightrollloop Controllable nose of landing gear; Excellent performance in high speed; Long flight time: about 10 minutes; Suitable for the advanced pilot; Standard export packing
R/c model airplane (tb-20 trainer) 4 channels proportional r/c airplane; Easy to fly; Quick assembling; Reasonable structure Perfect invert flight at low speed; Perfect aerobatic flight; Flight time: about 10 minutes; Suitable for intermediate or advanced pilot; Standard export packing
R/c model airplane(bee sport flyer) Easy to fly for beginners with stable flight characteristics; Low speed hedgehopping at speed of 10km/h; Lightweight with anti-collide; Low c.G. Design with special stability; Anti-pitch performance; Stable nosing down; Controllable nose landing gear, easy to fly; Die-cast design easy to replace the spare parts; Solid wing (for slow flyer); Clipped wing (for sport flyer); Stable flight with rolls, loops, and inverted flight Standard export packing
Cap232-120grade Specifications: Length: 955mm, Wingspan: 1800 mm, Flying weight: 2500-2650 g, Engine: 2c: 40-46, 4c: 48-53 Power: gas Characters: Perfect emulational, elegant styling and design. The structure with reason, and very convenience for install and maintenance. They are better choice for novice transition to the middle skill level. By carton
Mako jet The material of fuselage and airfoil: eps+epp foam material Remote control range: air >300meter Flying of weight: 9.7003 oz Thrust: > 14.8151 oz Power system: brushless out runner motor be placed inside Size: wingspan: length: high = 22.8346 in: 20.4724in: 4.9213in Flying time: 8--10minites Flying height: sight distance Charge time of battery: 1 hour Product including: plane, three channels proportion radio controller, receiver (inside fuselage), lithium battery, charger, foam packing, gift box, desiccant. Certificates we ve got: ce, rohs, ne5008, fcc By coulour carton
F3d aerobatic This is a kind of arf rc model plane, which is made by high quality balsa and inland film, use gas as power. Specifications: length: 955mm, wingspan: 1800 mm, flying weight: 2500-2650 g, engine: 2c: 40-46, 4c: 48-53 Characters: Excellent control and stability, they can perform the loops, rolls and inverted flight aerobatics. Fit for skilled players. By carton
40 trainer This is a kind of arf rc model plane, which is made by high quality balsa and inland film, use gas as power. Specifications: length: 1250mm, wingspan: 1520 mm, flying weight: 2450-2550 g, engine: 2c: 40-46, 4c: 52-70 Characters: Steady in flight and very easy to master. They are better choice for novice transition to the middle skill level. By carton
Xc70 This is a kind of arf rc model plane, which is made by high quality balsa and inland film, use gas as power. Specifications: Length: 1450mm, Wingspan: 1490 mm, Flying weight: 2800-2900 g, Engine: 4c: 70 Characters: Steady in flight and very easy to master. They are better choice for novice transition to the middle skill level.
Rafale Aluminium model. Shiny polished. Size 8
Features: sandbags can improve the strength of the legs, which can make it easier to jump higher and start running when exercising. If you want to get a more obvious effect, you should start wearing them every day, and you don't need to remove them when doing such exercises as jogging, but you should remove them before doing more vigorous exercises and then wear them after exercising.In addition, sandbags should not be tied for too long. The weight of sandbags should be able to bear by oneself, and the method should be appropriate and moderate to avoid unnecessary negative effects. Product property: specification: 69 35 80cm, weight (kg) and number of sandbags: 0.5 (2 PCs), 0.75 (2 PCs), 1 (2), 1.5 (2), 2 (2) and 2.5 (2pc) totally 12 PCs.
Type: Airbus A350 Painting: Lufthansa Material: Zinc alloy Composition: metal plane model + support + base Size: 20 cm Proportional specification: 1:330 Gross weight: 18 KGS/CTN Quantity: 36 PCS/CTN Carton size: L39.5*W39.5*H50.5cm
We had successfully integrated WIFI, Light Flow, 1080P camera into one small UAV which weights less than 200g, with ESC and brushless motor integrated also. This UAV could be controlled by APP and remote control both, which also been R&D by ourselves. Contact us for any more customized UAV solutions.
Boeing and Airbus from 14cm to 28cm. Livery can be customized. Please contact me if you need more information about them.
