Mineral water.
Copper fitting..
A J Services manufacture a large number of different styles of fire and smoke dampers. Both fire and smoke dampers play a vital role in the safety of a building which has ductwork system which is connected to a HVAC system. Fire dampers have an attached fusible link which is set to be triggered when a pre-determined air temperature is reached - this forces the blades to shut and allows the fire/smoke to travel no further. The links monitor the air temperature and are traditionally set to 72 degrees, although this can be altered if asked. The dampers are rated at 2hrs, this means that they will contain the fire in place for 2hrs. The dampers are manufactured from galvanised steel and can be produced in sizes ranging from 80mm to 2000mm with options for both circular and square/rectangular ducting. The casing on all dampers is rectangular, so the dampers which are suitable for spiral tubing have an attached spigot - this is where the damper can be attached to tubing and as such the blades are described as out of stream. The rectangular dampers can have an attached spigot, no spigot or can be an induct damper. All dampers as standard are supplied with hanging cleats, and have options for drywall framing and HEVAC frames.
Crc, prime quality hdg, coils, galvanized steel coils.
Soft drinks, energy drinks, water.
Food like oil, cereal, crisps and drinks like soda, juice, water.Transportation and shipping
Bulgarian lavender oil, bulgarian melissa oil, bulgarian rose oil, bulgarian blue yarrow oil, floral water rose.
This derivative possesses low viscosity, is very sticky and hygroscopic in nature. It helps in increasing dry strength and at the same time is completely soluble in water. It can be used for: Mining industry as additives for froth flotation (ore sedimentation) In foundries as an excellent binding agent for cores
This derivative possesses low viscosity, is very sticky and hygroscopic in nature. It helps inincreasing dry strength and at the same time is completely soluble in water. It can be used for: Mining industry as additives for froth flotation (ore sedimentation) In foundries as an excellent binding agent for cores
Drilling starch is a polymer derived from the unmodified starch including amylopectin content. This starch has fermentation stability and it gives enhanced high temperature fluid loss performance when working in combination with drilling fluids. It has optimal use in all water-based drilling, stimulation, and completion fluids. Usage: -Apt for drilling, work over or completion of fluid leakage - Control additive appropriate for utilization at high temperatures - Keep up liquid loss control at up to 300F (150C), helps in stabilising rheology - Does not ferment Treatment rate, Typical, 1-4 ppb, as essential to control liquid loss. - Higher temperatures (above 150C) may be necessary to activate HT Starch to supply effective rheology and fluid loss control totally as a binding agent. Parameters: -Suspension Properties: -Viscometer dial reading at 600 r/min: -In 40 g/lit salt water, after 16 hrs hot rolling at 250F -Max 18 Cps -In saturated salt water, after 16 hrs hot rolling at 250F- Max 20 Cps -Filtrate Volume: -In 40 g/lit salt water, millimetres, 16 hrs hot rolling at 250F- Max 10 ml -In saturated salt water, millimetres, 16 hrs hot rolling at 250F- Max 10 ml -Residue greater than 2000m -No Residue -Solubility in 15% HCL- Min 99.5% -Moisture- Max 13.0% -Fermentation test- Min 3 days
Produced by the hydrolysis of corn-starch, through an eco-friendly process, our white dextrin has a wide range of applications: - Can be used at higher solids levels than native or modified starches - To create stronger bonds - Have more tack - Dry faster than pastes made from unmodified starch - Is soluble in water Dextrin pastes provide excellent machinability and can be used in: - Adhesives and coatings that come into contact with food products - Child-safe school pastes - Removable wallpaper - Bag/envelope seams - Paper and textile sizing. Parameters: -Appearance- Off white free flowing powder -pH of 10% Slurry -2.5 - 3.5 -Moisture -Max 10% -Ash content -Max 1% -Free acidity- Max 5ml -Cold water solubility -Min 85%
Manufactured by addition of acid to a native starch slurry, this popular textile starch has low and uniform viscosity, which allows it to withstand high temperatures and to be used in higher concentrations. This starch may also be used in paper manufacturing for sizing and strength. Our sales team can guide you towards finding the best specifications for this purpose. -Brightness- Min 90% -Cold water solubility Max 4% -Ash Content Max 1%
Manufactured by addition of acid to a native starch slurry, this popular textile starch has low and uniform viscosity, which allows it to withstand high temperatures and to be used in higher concentrations. This starch may also be used in textile manufacturing for sizing and strength. Our sales team can guide you towards finding the best specifications for this purpose. -Brightness- Min 90% -Cold water solubility Max 4% -Ash Content Max 1%
Spray starch derived from either maize or tapioca is applied by means of spraying and is used primarily in the production of paper, boards, and ply. This modified starch: - Increases the strength of ply bonds in boards and plywood. - Increases the bending and spring back tendency of boards. - Reduces the de-lamination of plywood and laminated boards. Parameter: -Appearance- fine free flowing white powder -Viscosity in Brookfield Viscometer -Min 2000 cps -Moisture Content- Max 13.0% -pH of 10% slurry- 6.0 - 8.0 -Ash Content- Max 1.0% -Brightness -Min 85.0% Cold water Solubility Max 4.0%
Our Cold Pasting Gum Powder possesses a consistent viscosity, excellent adhesive property, high strength film property, best tackiness, is fast drying and available in a wide range of water solubilities. This product is highly appreciated for its purity, high effectiveness, precise pH value, and long shelf life. This is a type of pasting powder which is primarily used for imparting superior stiffness and strength to laminated boards and considered as an ideal choice for making corrugated sheets. -Applications: -Labels (Regular and Waterproof) -Used in Carton Board and Corrugated Boxes Manufacturing -Wood Adhesives -Paper Sacks -Stamps, book bindings, envelopes -Parameters BiPAS:�?� -Appearance -Free Flowing , off white Powder -pH of 10% Slurry - 8-11 -Moisture - Maximum 10% -Viscosity in B4 Cup [1:6] 28-32 Seconds
Cationic starch carries a positive charge over the entire pH range creating their affinity towards negatively charged substrates, such as cellulose, pulp and some synthetic fibres, aqueous suspensions of minerals and slimes and biologically active macromolecules. This starch may be derived from either maize or tapioca is used primarily as a wet-end starch and mainly used in paper and cardboard forming processes: -Increases mechanical strength and for better retention of fines and fillers -Enables faster drainage and improved sheet formation and production, saving both time and resources. -Improves opacity, brightness and stiffness of paper and allows for better printing quality -It is also popularly used in the manufacture of disposable diapers (nappies) and personal sanitary products. Parameters BiCAT: -Appearance - fine free flowing white powder -pH of 10% Slurry - 6.0- 8.0 -Moisture Max -13.0 % -Viscosity in Brookfield Viscometer -Min 300 cps -Brightness - Min 85.0 % -Degree of Substitution - 0.02-0.04 % -Cold Water Solubility -Max 4.0 %.
Cationic starch carries a positive charge over the entire pH range creating their affinity towards negatively charged substrates, such as cellulose, pulp and some synthetic fibres, aqueous suspensions of minerals and slimes and biologically active macromolecules. This starch may be derived from either maize or tapioca is used primarily as a wet-end starch and mainly used in paper and cardboard forming processes: -Increases mechanical strength and for better retention of fines and fillers -Enables faster drainage and improved sheet formation and production, saving both time and resources. -Improves opacity, brightness and stiffness of paper and allows for better printing quality -It is also popularly used in the manufacture of disposable diapers (nappies) and personal sanitary products. Parameters BiCAT: -Appearance - fine free flowing white powder -pH of 10% Slurry - 6.0- 8.0 -Moisture Max -13.0 % -Viscosity in Brookfield Viscometer -Min 300 cps -Brightness - Min 85.0 % -Degree of Substitution - 0.02-0.04 % -Cold Water Solubility -Max 4.0 %.
Tools Like Cutting Tools Knives Pliers Hammers , Electric Items ,Houseware , Fmcg Goods , Food & Drinks , Home Goods.
Ac and Fridge Compressors scrap 220-240V/50 or 60HZ Cooling capacity: 90-190W Displ.: 5.99-12.53cm3 Brand make: Danfoss. Ireland, Embraco and Aspera. oil drained (without oil), with 99% Copper Winding and attached Copper Pipes. without Freon
We are an import/export company based in that supplies premium products (please find our contact details at the bottom of this email). Currently, we offer both Imperial caviar from the and Almas caviar. All our caviar originates from a fresh water farm located in the size and colour of caviar is deeply variable and therefore it is not possible to quote exactly for either, however rough estimates for both can be stated as follows: the size is between 2.5-3.5mm and the colour varies from light black to pale silver/ pearl grey.
