Produced by Chongqing Hesheng Longgang Technology Co., Ltd. (manufacturer) Basalt fiber reinforcement (new material to replace reinforcement) Product Description: basalt fiber reinforced bar (BFRP) is a new composite material formed by pultrusion process. It is made of basalt fiber as reinforcement, resin, filler and curing agent. Now it has been widely used in construction, highway and bridge constructionã?? Basalt fiber reinforcement can completely replace ordinary steel reinforcement and deformed steel; Compared with ordinary reinforcement, it has strong advantages: (see Annex for technical parameters) 1. The cost is the same as that of ordinary reinforcement; 2. The strength is 200% of the ordinary reinforcement with the same specification and diameter; The tensile strength reaches 1100mpap; The reinforcement is only 450MPa, 3. Basalt fiber reinforcement, especially with high acid, alkali and corrosion resistance, is a kind of electrical insulator that will never rust. 4. Basalt fiber reinforced bar, which is non-magnetic. It has high tolerance to the moisture concentration in cement mortar and the penetration and diffusion of carbon dioxide, and can prevent the corrosion of concrete structure in harsh environment, so as to improve the durability of buildings and bridges. 5. The specific gravity of basalt fiber reinforcement is 2.1g/cm3; The specific gravity of steel and reinforcement is 7.85/cm3; The diameter weight of the same specification is 370% lighter than that of steel reinforcement, and the strength is 200% of that of steel reinforcement. 6. The physical properties of basalt fiber reinforcement are higher than that of steel reinforcement, and the cost is the same as that of steel reinforcement, which is of epoch-making significance to replace steel reinforcementã??
sizes: 10mm - 40mm, 6, 9 & 12 meters
Spring steel strip Steel grade 65Mn,1065,SAE1055,1045,CK50,CK55, CK60,CK67, CK70,CK75, C75Cr1,50CrV4, 51CrV4, 60Si2Mn, etc Thickness 0.08-4.0mm Width 3-400mm Hardness <200HV, 200-300HV, 300-550HV Edge slit edge; both rounded; one side round, one side slit; square etc Surface polished (blue, yellow, white, grey-blue, black, bright) or Nature etc Tolerance thickness +/-0.01mm max; width +/-0.05mm max Physical propety Tensile strength: 450-1850N/mm2
Spring steel strip Steel grade 65Mn,1065,SAE1055,1045,CK50,CK55, CK60,CK67, CK70,CK75, C75Cr1,50CrV4, 51CrV4, 60Si2Mn, etc Thickness 0.08-4.0mm Width 3-400mm Hardness <200HV, 200-300HV, 300-550HV Edge slit edge; both rounded; one side round, one side slit; square etc Surface polished (blue, yellow, white, grey-blue, black, bright) or Nature etc Tolerance thickness +/-0.01mm max; width +/-0.05mm max Physical propety Tensile strength: 450-1850N/mm2
Spring steel strip Steel grade 65Mn,1065,SAE1055,1045,CK50,CK55, CK60,CK67, CK70,CK75, C75Cr1,50CrV4, 51CrV4, 60Si2Mn, etc Thickness 0.08-4.0mm Width 3-400mm Hardness <200HV, 200-300HV, 300-550HV Edge slit edge; both rounded; one side round, one side slit; square etc Surface polished (blue, yellow, white, grey-blue, black, bright) or Nature etc Tolerance thickness +/-0.01mm max; width +/-0.05mm max Physical propety Tensile strength: 450-1850N/mm2
ss 301 steel strip wide 10mm thickness 0.5mm hardness 1300-1400 mpa sharpend from one side
K 67 SPRING STEELHARDNESS 43HRCTHICKNESS : 2.5MMQTY:3.000 U Standard:AiSi Standard:ASTM Standard:DIN Standard: hard GB Standard:JIS Place of Origin:CN;GUA Technique:Cold Rolled Surface Treatment:Polished Steel Grade:Ck67ck70ck75 Sae1070 Sae1074 Application:Industry Width:8-300mm Length:Customer\'s Request Product Name:High Carbon Steel Strip Spring Surface:Heat treatment Grade:ck60,ck67,ck70,ck75,C75cr1 SAE 1060, SAE 1065, SAE 1070, SAE 1075 Color:Blue, polished blue, polished bright Material:carbon steel coil Edge:Round, slit, square Certificate:ISO9001:2008/SGS/BV Thickness:0.15-2.5mm Hardness:<20hrc, 20-30hrc, 30-55hrc
Spring steel strip Steel grade 65Mn,1065,SAE1055,1045,CK50,CK55, CK60,CK67, CK70,CK75, C75Cr1,50CrV4, 51CrV4, 60Si2Mn, etc Thickness 0.08-4.0mm Width 3-400mm Hardness <200HV, 200-300HV, 300-550HV Edge slit edge; both rounded; one side round, one side slit; square etc Surface polished (blue, yellow, white, grey-blue, black, bright) or Nature etc Tolerance thickness +/-0.01mm max; width +/-0.05mm max Physical propety Tensile strength: 450-1850N/mm2
Product name05mm Hot Dipped Galvanized Blue Steel Strapping Gi Carbon Steel Strip SpangleRegular spangle Minimal SpangleZero SpangleBig Spangle KeywordGalvanized steel strip Zinc Coating40275gm2 MOQ1 Ton AdvantageFactory directly supply Delivery time515 Days SizeCustomized Size CertificateISO 90012008BV Surface Treatmentgalvanized Applicationmaking pipes Applicationcutting sheets Applicationmaking small tools Applicationmaking corrugated sheets Applicationmaking container Applicationmaking fences StandardASTM CertificateJIS CertificateISO9001 CoatingZ181Z275 TechniqueColed Rolled Based Tolerance 1 Processing ServiceWelding Processing ServicePunching Processing ServiceCutting Processing ServiceBending Processing ServiceDecoiling Spangle TypeZero Spangle Skin PassYes Oiled or NonoiledSlightly Oiled HardnessFull Hard Delivery Timewithin 7 days Place of OriginCNJIA Thickness015mm30mm Width8mm600mm GradeQ235B EH32EH36 CCSACCSBCCSACCSBCCSCCSDCCS
Thickness Tolerance+/-0.01mm Width Tolerance+/-0.05mm Surface nature, blue, yellow, white, polished, white polished, bright, black Coils weight as your request MOQ 1 Ton Monthly capacity 500 Tons Package Standard Seaworthy Package Payment L/C, Western Union, D/P, D/A, T/T, Trade assurance Application band saw blade, rolling shutter spring, bricklayer trowel, plaster trowel, putty knives, scraper, power trowel blade, lawn trowel blade, shoe insole, flat spring, toy spring, spring baskets etc.
Thickness Tolerance +/-0.01mm Width Tolerance+/-0.05mm Surface nature, blue, yellow, white, polished, white polished, bright, black Coils weight as your request MOQ 1 Ton Monthly capacity 500 Tons Package Standard Seaworthy Package Payment L/C, Western Union, D/P, D/A, T/T, Trade assurance Application band saw blade, rolling shutter spring, bricklayer trowel, plaster trowel, putty knives, scraper, power trowel blade, lawn trowel blade, shoe insole, flat spring, toy spring, spring baskets etc.
Thickness Tolerance+/-0.01mm Width Tolerance+/-0.05mm Surface nature, blue, yellow, white, polished, white polished, bright, black Coils weight as your request MOQ 1 Ton Monthly capacity 500 Tons Package Standard Seaworthy Package Payment L/C, Western Union, D/P, D/A, T/T, Trade assurance Application band saw blade, rolling shutter spring, bricklayer trowel, plaster trowel, putty knives, scraper, power trowel blade, lawn trowel blade, shoe insole, flat spring, toy spring, spring baskets etc.
Spring steel strip Steel grade 65Mn,1065,SAE1055,1045,CK50,CK55, CK60,CK67, CK70,CK75, C75Cr1,50CrV4, 51CrV4, 60Si2Mn, etc Thickness 0.08-4.0mm Width 3-400mm Hardness <200HV, 200-300HV, 300-550HV Edge slit edge; both rounded; one side round, one side slit; square etc Surface polished (blue, yellow, white, grey-blue, black, bright) or Nature etc Tolerance thickness +/-0.01mm max; width +/-0.05mm max Physical propety Tensile strength: 450-1850N/mm2 contact: Mobile/whatsapp 8613853842286 /hsma@tahenson.com
Spring steel strip Steel grade 65Mn,1065,SAE1055,1045,CK50,CK55, CK60,CK67, CK70,CK75, C75Cr1,50CrV4, 51CrV4, 60Si2Mn, etc Thickness 0.08-4.0mm Width 3-400mm Hardness <200HV, 200-300HV, 300-550HV Edge slit edge; both rounded; one side round, one side slit; square etc Surface polished (blue, yellow, white, grey-blue, black, bright) or Nature etc Tolerance thickness +/-0.01mm max; width +/-0.05mm max Physical propety Tensile strength: 450-1850N/mm2
Stainless Steel Strip The properties of stainless steel are corrosion resistance, high ductility, attractive appearance and low maintenance. Stainless steel contains chromium which provides the properties of corrosion resistance at high temperatures. Stainless steel can withstand corrosive or chemical environments due to its smooth surface. Stainless steel products are safe for long-term use with excellent resistance of corrosion fatigue. Other specifications are also available up to request Hot Rolled Strip Available Size Width: 16.0~609.6 mm Thickness: 2.5~10.0 mm Available Steel Grade: 304, 304L, 316L Surface Finish: No.1 Cold Rolled Strip Available Size Width: 4.0~609.6 mm Thickness: 0.1~3.0 mm Available Steel Grade: 201, 202, 204 Cu3, 301, 304, 304L, 310S, 316L, 321, 409L, 410S, 420J2, 430, 439, 441, 444, 445 Surface Finish: 2B, 2D, BA, No.3, No.4, No.5, SB, HL
65Mn CK67 high carbon cold rolled spring steel strip Hardened and Tempered Steel Strip Hardened and Tempered is a thermal process that strengthens steel strips through a controlled heating and cooling process. The hardening process involves heating the steel strip to above the rapidly cooling. The steel strip in this condition is extremely brittle and requires further treatment in the tempering. Then strips are reheated to a lower temperature and holding it at the given temperature for a given period of time. This process is done in an inert atmosphere to avoid oxidation. This type of steel strip has big degree of toughness and has excellent spring properties Standard AISI, ASTM, BS, DIN, GB, JIS Place of Origin China Material Hot Rolled Surface Polished Application shutter door, plastic trowel, bricklayer trowel, putty knives, scraper, springs, metal part, shoe insole, shoe accessories, blade, band saw blade Brand Name HENSON Width 2.0mm-300.0mm Length Customize Tolerance +/-10% Hardness 40-55HRC Surface nature, blue, yellow, white, polish Edge Slit,Round,Square MOQ 1000KGS Tolerance thickness+/-0.01mm max,width +/-0.05mm max Type strip,coil,sheet Coil ID 300-500 mm Tensile Strength 540-1575N/mm2 Yield Strength 370-1475N/mm2
65Mn CK67 high carbon cold rolled spring steel strip Hardened and Tempered Steel Strip Hardened and Tempered is a thermal process that strengthens steel strips through a controlled heating and cooling process. The hardening process involves heating the steel strip to above the rapidly cooling. The steel strip in this condition is extremely brittle and requires further treatment in the tempering. Then strips are reheated to a lower temperature and holding it at the given temperature for a given period of time. This process is done in an inert atmosphere to avoid oxidation. This type of steel strip has big degree of toughness and has excellent spring properties Standard AISI, ASTM, BS, DIN, GB, JIS Place of Origin China Material Hot Rolled Surface Polished Application shutter door, plastic trowel, bricklayer trowel, putty knives, scraper, springs, metal part, shoe insole, shoe accessories, blade, band saw blade Brand Name HENSON Width 2.0mm-300.0mm Length Customize Tolerance +/-10% Hardness 40-55HRC Surface nature, blue, yellow, white, polish Edge Slit,Round,Square MOQ 1000KGS Tolerance thickness+/-0.01mm max,width +/-0.05mm max Type strip,coil,sheet Coil ID 300-500 mm Tensile Strength 540-1575N/mm2 Yield Strength 370-1475N/mm2
65Mn CK67 high carbon cold rolled spring steel strip Hardened and Tempered Steel Strip Hardened and Tempered is a thermal process that strengthens steel strips through a controlled heating and cooling process. The hardening process involves heating the steel strip to above the rapidly cooling. The steel strip in this condition is extremely brittle and requires further treatment in the tempering. Then strips are reheated to a lower temperature and holding it at the given temperature for a given period of time. This process is done in an inert atmosphere to avoid oxidation. This type of steel strip has big degree of toughness and has excellent spring properties Standard AISI, ASTM, BS, DIN, GB, JIS Place of Origin China Material Hot Rolled Surface Polished Application shutter door, plastic trowel, bricklayer trowel, putty knives, scraper, springs, metal part, shoe insole, shoe accessories, blade, band saw blade Brand Name HENSON Width 2.0mm-300.0mm Length Customize Tolerance +/-10% Hardness 40-55HRC Surface nature, blue, yellow, white, polish Edge Slit,Round,Square MOQ 1000KGS Tolerance thickness+/-0.01mm max,width +/-0.05mm max Type strip,coil,sheet Coil ID 300-500 mm Tensile Strength 540-1575N/mm2 Yield Strength 370-1475N/mm2
65Mn CK67 high carbon cold rolled spring steel strip Hardened and Tempered Steel Strip Hardened and Tempered is a thermal process that strengthens steel strips through a controlled heating and cooling process. The hardening process involves heating the steel strip to above the rapidly cooling. The steel strip in this condition is extremely brittle and requires further treatment in the tempering. Then strips are reheated to a lower temperature and holding it at the given temperature for a given period of time. This process is done in an inert atmosphere to avoid oxidation. This type of steel strip has big degree of toughness and has excellent spring properties Standard AISI, ASTM, BS, DIN, GB, JIS Place of Origin China Material Hot Rolled Surface Polished Application shutter door, plastic trowel, bricklayer trowel, putty knives, scraper, springs, metal part, shoe insole, shoe accessories, blade, band saw blade Brand Name HENSON Width 2.0mm-300.0mm Length Customize Tolerance +/-10% Hardness 40-55HRC Surface nature, blue, yellow, white, polish Edge Slit,Round,Square MOQ 1000KGS Tolerance thickness+/-0.01mm max,width +/-0.05mm max Type strip,coil,sheet Coil ID 300-500 mm Tensile Strength 540-1575N/mm2 Yield Strength 370-1475N/mm2
65Mn CK67 high carbon cold rolled spring steel strip Hardened and Tempered Steel Strip Hardened and Tempered is a thermal process that strengthens steel strips through a controlled heating and cooling process. The hardening process involves heating the steel strip to above the rapidly cooling. The steel strip in this condition is extremely brittle and requires further treatment in the tempering. Then strips are reheated to a lower temperature and holding it at the given temperature for a given period of time. This process is done in an inert atmosphere to avoid oxidation. This type of steel strip has big degree of toughness and has excellent spring properties Standard AISI, ASTM, BS, DIN, GB, JIS Place of Origin China Material Hot Rolled Surface Polished Application shutter door, plastic trowel, bricklayer trowel, putty knives, scraper, springs, metal part, shoe insole, shoe accessories, blade, band saw blade Brand Name HENSON Width 2.0mm-300.0mm Length Customize Tolerance +/-10% Hardness 40-55HRC Surface nature, blue, yellow, white, polish Edge Slit,Round,Square MOQ 1000KGS Tolerance thickness+/-0.01mm max,width +/-0.05mm max Type strip,coil,sheet Coil ID 300-500 mm Tensile Strength 540-1575N/mm2 Yield Strength 370-1475N/mm2
