Rigidity of a rectangular frame of the scene in the harshest environments. May even exert a strong force [Tensile strength: 60 ~ 89kgf] Specification Digging Depth 66~82ft Vertical wall Radious 26~31ft Working Radious 35~43ft Dumping Height 2~32ft Permision Vertical Angle ¡¾10 Working Pressure 3,625psi Working Pull Force 6,614~24,250lb Max Pull Force 11,023~37,479lb Weight 8,378~20,944lb Push / Pull Speed 30~15sec Clamshell Bucket 1.05~2.62yd3 Equipment Grade 20~25 Ton Grade
The machine applies to clay, shale, coal gangue, fly ash, slag, mountain mud, silt, etc. As raw materials to carry out a strong mixing, vacuum processing, and then the screw auger extrusion system to produce provisions cross-section of ordinary solid bricks, hollow bricks, and other products. Nude or container
1.Liugong/ XGMA/XCMG/sany Construction machinery original manufactured parts. 2.Zf transmission /converter/alex parts. 3.Cummins/shangcai /WEICAI original engine parts. 4.Kinds of seal.
Technical Specifications: Hopper Volume: 2.5 m3 Main Belt Width: 800 mm Drum Diameter and Length: 1.9 m/5.3 m Capacity: max 60 m3/h Control Panel Diesel Driven Generator 40 kVA 2 Units of Mechanic Collapsible Belt Conveyor Chassis: Tandem Axle, Air Brake, Taillights, Towing Eye It can be towed up to speed of 80 km/h on highway.
Technical Specifications: Sloped Grid Screen Dimension: 3.5x1.5 m / 2 Decks Diesel Driven Generator Remote Controlled Hydraulic Tilting Grid Control Panel Remote Controlled Belt Conveyor with Horizontal Movement (Hydraulic Stroke 1 mt.) Remote Controlled Machine Inclination Adjustment Crawler Set with Towing Eye.
These professional machines are generally used for taking out sand and rubble from lake, pond, river and sea. And also they are used for cleaning lake, and getting wet clay from dams. These machines are manufactured in the light of superior German technology. The diving depth of the machines is ranging up to 100 meters according to the model type. Bridge columns attached to the pontoon and the grab mounted below the crane are the main components of the system. The working principle of the system; The grab diving into water with open mouth reaches the bottom of water and closes by rope to get material. Then grab is pulled up with rope drum. Water filled in the grab is waited to flow through the slots and the grab releases the material in hopper. Coarse material is separated from hopper grid and the material passing through the grid is being pre-screened before being transferred to land by belt conveyors on pontoon. TYPE TECHNIC Grab Capacity Grab Grab Volume (At 20 m. Diving Diving diving depth) Depth Drive KAK 140 4.2 m3 180 m3/h 45 m 170 kW KAK 180 5.5 m3 210 m3/h 50 m 240 kW KAK 220 6.0 m3 320 m3/h 80 m 300 kW KAK 240 6.8 m3 360 m3/h 80 m 300 kW KAK 300 8.0 m3 410 m3/h 80 m 400 kW KAK 360 10.0 m3 480 m3/h 100 m 520 kW KAK 400 12.0 m3 530 m3/h 100 m 625 kW
TYPE Bucket Volume Capacity Diving Depth Bucket Drive E2-L 80 liters 170 tons/h 6 m 30 kW E3-L 125 liters 250 tons/h 8 m 45 kW E4-L 175 liters 370 tons/h 10 m 55 kW
We specialize in construction machinery as well as spare parts export in China. We mainly deal with wheel loader, motor grader, road roller spare parts for XCMG machine and Shantui bulldozer spare parts. Year 2009, we have set up 300m2 warehouse to offer spare parts for our customers. There is no problem to offer crane spare parts, wheel loader spare parts and motor grader spare parts. The parts are original spare parts matched with XCMG machinery. Year 2011, Shantui spare parts ware house were also set up, which covered 100 m2, specializing in Shantui bulldozer spare parts. Because of our persistence hard work, we have our products sold to nearly 20 countries and regions including Brazil, Iran, South Africa, America, Ethiopia, Russia, Kazakhstan and so on. And these customers have a very good feed back to our products. Whats more, our parts have covered 50% of Argentina market and 30% of Iran market for spare parts importation. Year 2011, we became the first level distributor of JINAN HYDRAULIC PUMP CO., LTD. We offer gear pumps for all brands wheel loaders made in China including XCMG, LIUGONG, LONKING, SEM, SDLG, CG etc. These pumps are originally used to assemble above mentioned wheel loaders. We could enjoy a very competitive purchase price for pumps. Wood case.
We specialize in construction machinery as well as spare parts export in China. We mainly deal with wheel loader, motor grader, road roller spare parts for XCMG machine and Shantui bulldozer spare parts. Year 2009, we have set up 300m2 warehouse to offer spare parts for our customers. There is no problem to offer crane spare parts, wheel loader spare parts and motor grader spare parts. The parts are original spare parts matched with XCMG machinery. Year 2011, Shantui spare parts ware house were also set up, which covered 100 m2, specializing in Shantui bulldozer spare parts. Because of our persistence hard work, we have our products sold to nearly 20 countries and regions including Brazil, Iran, South Africa, America, Ethiopia, Russia, Kazakhstan and so on. And these customers have a very good feed back to our products. Whats more, our parts have covered 50% of Argentina market and 30% of Iran market for spare parts importation. Year 2011, we became the first level distributor of JINAN HYDRAULIC PUMP CO., LTD. We offer gear pumps for all brands wheel loaders made in China including XCMG, LIUGONG, LONKING, SEM, SDLG, CG etc. These pumps are originally used to assemble above mentioned wheel loaders. We could enjoy a very competitive purchase price for pumps. Wood case.
Floorscreed pump diesel version. Includes compressor. Also available an electric version (no compressor included) for pumping dry or semydry materials, sand, screed, etc.. To long distances or heights. Pumping capacity up to 150 mts height and also horizontal. Up to 6 m3 per hour.
Central asphalt stationary, with oven, mixer, filter sleeves and dust deposit, deposit of naphtha, boiler heating, deposition of glue, 4 silos for inert with lanyard, 1 silo ready for tarmac, 1 compressor. 280.000 euros. 5 trucks.
The characteristics of 4-20 Automatic Brick Making Machine 1.Brick Making Machinehas high speed, high capacity, strong structure, and high efficient. 2.The formed steel and special welding procedure of machine structure makes the machine not easy to sealing-off and break, and especially strong and durable. 3.The adoption of electromagnet electronic control technology of the head downlink could reach accurate impact affect, which can effectively improve the thickness of block as well as improving working speed. 4.The fan-cooled brake motor can get a good effect of quick brake, accurate location and not easy to burn the motor. 5.Brick Making Machine's structure. all of the moulds adopt CO2 protecting welding technique, which makes the machine structure more strong and durable, not easy to break, boom, and can get a longer using life.
Dimension : 2650×2200×2780mm Host machine power: 32 KW Moulding area: 800×600mm Vibration force: 45KN Moulding period:15-25S Mixer model: JS500 The size of the pallet: 850×750×20/25mm General water Consumption: 6T/ day Weight of machine: 8.7T Factory area: 200m2 1 Theoretical workshop area : 150m2 , need about 6-7workers. 2 the office , curing area and stacking area to arrange according your situation. Advanced techonlogy of Concrete cement brick machine QT4-15C Hydraulic pressure Various kinds of blocks: paver blocks, hollow blocks, solid blocks, porous blocks etc. Fully automatic concrete brick machine Configuration of QT4-15C: PLC, batching plant, JS500, belt conveyor, blocks receiver, pallet stacker, forklift, pallet conveyor, pigment mixer etc. High block density : Wtih PLC control. Nude pacing , the QT4-15C block making machine is about 9t . And the dimension of the machine is 2650*2200*2780mm.
Technical characteristics 1. This brick machine is feature of high-speed operation, low abrasion on the sealing of main cylinder, uneasy to damage or leak and low failure rate. 2. The hydraulic system of our brick machine is designed with double-way loop, which adopts professional combined valves to realize the working cycle of filling, air discharge, pressing and de-molding 3. The hydraulic oil tank of our Brick machine is designed with automatic oil heating and cooling systems and oil purification devices, which adopts repeated continuous filtering to ensure the optimal working conditions of hydraulic oil. 4. The feed hopper of our Brick machine is designed with stock level recorder, the open-close door cylinder realizes the automatic open-close of the door so as to ensure the feed averagely to the material box. 5. The cart of automatic material box of our Brick machine adopts positive feed pattern with forced mixing mechanism so as to ensure the average cloth and efficiency. 6. The front of automatic cloth cart is installed with automatic blank-taking device to convey the de-molded bricks to the service position or belt machines. 7. Our Brick machine adopts PLC Siemens controller and man-machine interface, and the whole machine can be operated automatically 8. The molds can be replaced for the production of standard bricks, blink-hole bricks and hollow bricks with different specifications. Main Technical parameters: Type: DYS850 Max work pressure(KN): 8500KN Max oil pressure in the hydraulic system (Mpa): 28.0Mpa Installed capacity(Kw): 74KW Quantity of solid bricks/time 240X115X53mm: 24pcs Quantity of hollow bricks/time 240X115X90mm (hollow rate:25%): 12pcs Automatic setting machine/time(standard brick): 48pcs/time Output/unit/h(based on solid bricks): 5400-5760pcs/h Annual output: 35-38 million purchase. International standard container.
Type: DY1250 Specification: 240, 115, 53mm(standard brick);240, 115, 90mm(perforated brick);390, 190, 190mm(hollow);colorful pavement bricks with various specifications Quantity: 36bricks/time(standard brick) Output: 6480-7640bricks/h Nominal Pressure: 1250T Pressure Head Course: 500/900mm Drive Power: 90KW(main motor automation: Full automatic cycle control on press unit Operating mode: convenient and rapid man machine interface through 10.4 inches touch screen External Size: 4890, 5060, 4690mm Press Mass: 85T. International standard container.
Our muti-functional hydraulic brick press is a high-tech patent product researched and developed by our company based on the equipment imported from the United stateds and Germany. Hydraulic brick machine adopts the 3-beam-4-column pre-stress force tie rod sleeve structure and optimized finite element stress analysis, its firm structure can sustain 2000tons. Features: 1. Good quality and competitive price 2. Durable and long service life 3. Nice shape and excellent performance 4. Save power and popular In overseas market 5. Automatic hydraulic brick machine 6. PLC automatic batching 7. High capacity and productivity. National standard.
1. Dy1100 automatic multi-function hydraulic brick machine is our company introduction of absorption of USA and Germany technology research and development a high-tech patent product. 2. DY1100 adopts 3-beam 4-column prestress force tie bar sleeve structure and optimized finite element stress analysis, Enough to withstand two thousand tons of tension. 3. Adopting Germany Siemens PLC program control, human-machine interface and touch operation. 4. Oil cylinder seals all adopts Germany original parts, cylinder body is forged with double alloy, internal surface by grinding under heat treatment. 5. Adopting built-in displacement sensor in oil cylinder, which can control brick stuffing, high pass rate, low error (error is only ±1mm. 6. Hydraulic pressure station is the drive source of hydraulic press. Our company adopts original hydraulic pump and directional valve of Germany, making hydraulic brick machine can realize prepressing, die pressing and maintaining pressing. Type : DY1100 block machine Specification : 240*115*65mm(standard bricks) 240*115*90mm(perforated brick) 390*190*190mm(hollow bricks) Colored pavement bricks with various specification Quantity : 32 bricks/time (standard bricks) Output: 5760-7200pcs/h (standard bricks) Nominal pressure : 1100T Pressure Head Course: 500mm Drive power: 75kw(main motor) Automatic full automatic cycle control on press unit Operating convenient and rapid man machine interface through 10.4 inches colorful touch screen Press mass 80t External size 4785*4965*4690mm.
Vibrating Feeder Features and values Reliable and precise feed rate adjustment by speed and stroke. Minimal maintenance and high performance Minimum operating cost Simple packaged feeding solutions Vibrating Feeder Operating principle:Vibrating feeder consists of vibrating frame, spring, vibrator, motor vibrating device and motor. The vibrator is made of two fixed eccentric shafts whose gears are jogged. When installation, the two gears must be jogged according to the sign. Through driving the motor, the two eccentric shafts start rotating to produce a linear huge power which forces the feeder to vibrate. Through the vibration, the materials will slip and sling on the funnel, moving forward. When the materials pass the screening part, smaller parts will fall down avoiding the further crushing, so screening purpose can be reached.
