Paintings
Each razor with 2 platinum coated blades and plastic cap 5 such razors in a pouch pack 12 such pouch packs in an inner carton 12 such inner cartons in a case i.e., 144 packs or 720 razors in a case 24 such cases on a pallet (pallet size 120 x 100 x 147) by air OR 40 such cases on a pallet (pallet size 120 x 100 x 235) by sea OR 520 such cases without pallets, direct on floor in a 20' dry container OR 1,050 such cases without pallets, direct on floor in a 40' dry container OR 1,260 such cases without pallets, direct on floor in a 40' HC dry container.
Excellence Award "Auto Folding / Unfolding Mobility Scooter" This particular Auto Folding / Unfolding Mobility Scooter, provides your needs because of its super lightweight and compact design. Weighing in at only 53 pounds, the weighs less than your average checked baggage. It is a portable power scooter that folds up electrically with the push of a button. Just press the button on the supplied key or the button located at the rear of the scooter and it automatically folds in seconds. Automatic folding & Unfolding with one touch on a remote control Powered by 8.7Ah Lithium battery and is approved for airline travel Lightweight�?�¯ï¿½?�¼?24 Kgs Maximum travel range-up to 11 Km Features a large 115 Kgs weight carrying capacity LED Headlight; Height Adjustable Tiller; Dual hand two way throttle control ldeal for cruise ships, and shopping centers or folding away into the boot of a car
Item No.: 2058-06 Size : 39 - 46 (5-12) Soles : 2058 Mono Density PU SAFETY FEATURES Abrasion Resistant Acid Resistant Anti Static Insole Excellent Shock Absorber Fine Leather Light Weight Slip Resistant Sole Steel Toe Cap ADDITIONAL PRODUCT INFO OVERVIEW Product Name : Safety Shoe Standard : S1 Sizes : 39 - 46 (5-12) Colors : Black AVAILABLE OPTIONS Product Number: 2058-06 Standard : S1, S1P, S2, S3 Toe : Steel Midsole : Steel Sole : Mono Color : Black / Brown MATERIALS Upper : Water Repellant Buff Waxy Lining : Soft Buff Leather Toe : Steel Footbed / Socks: Padded Antistatic Sole : 2058 Mono Density PU Certified : EN ISO 20345:2011 BOOT CARE * Clean your footwear regularly using high quality products that are suitable for the cleaning purpose. NEVER use caustic or corrosive cleaning agents. * When footwear is not in use clean the sole and store in a well-ventilated area. Never store the footwear underneath heavy items or in contact with sharp objects. If the footwear is wet allow it to dry slowly and naturally away from direct heat sources before storage. * To put on and take off footwear always fully undo fastening systems. Use a shoe horn to wear shoes. Only wear footwear of a suitable size. Products which are either too loose or too tight will restrict movement and will not provide optimum levels of protection and comfort. * The shoe should be used for the purpose for which it has been designed. Some facts about feet- * Most of the muscles are in your feet. Thus you should wear comfortable shoes. * The body temperature is regulated through your feet * Maximum number of nerves go through your feet. 100% COMFORT GUARANTEED * Quality leather upper and high quality breathable lining materials are used for proper air circulation in shoe for keeping the feet cool and odour free. * Construction of lasts based on extensive survey enabling the lasts/shoes to be manufactured for better fit providing maximum comfort. * Wider Steel and Ultra light Weight Composite Toe caps which provides more room for finger movements enhancing comfort. * Cushioned Insoles providing better comfort. * Shock absorbing PU midsole with low density providing uniform cushioning and co
Item No.: 2058-11 Size : 39 - 46 (5-12) Soles : 2058 Mono Density PU SAFETY FEATURES Abrasion Resistant Acid Resistant Anti Static Insole Excellent Shock Absorber Fine Leather Light Weight Oil Resistant Slip Resistant Sole Steel Toe Cap Water Proof ADDITIONAL PRODUCT INFO OVERVIEW Product Name : Safety Shoe Standard : S2 Sizes : 39 - 46 (5-12) Colors : Black AVAILABLE OPTIONS Product Number : 2058-11 Standard : S1, S1P, S2, S3 Toe : Steel Midsole : Steel Sole : Mono Color : Black / Brown MATERIALS Upper : Water Resistant Smooth Haircell Lining : Soft Buff Leather Toe : Steel Midsole : Steel Footbed / Socks : Cambrella and EVA. Antistatic Sole : 2058 Mono Density PU Certified : EN ISO 20345:2011 BOOT CARE * Clean your footwear regularly using high quality products that are suitable for the cleaning purpose. NEVER use caustic or corrosive cleaning agents. * When footwear is not in use clean the sole and store in a well-ventilated area. Never store the footwear underneath heavy items or in contact with sharp objects. If the footwear is wet allow it to dry slowly and naturally away from direct heat sources before storage. * To put on and take off footwear always fully undo fastening systems. Use a shoe horn to wear shoes. Only wear footwear of a suitable size. Products which are either too loose or too tight will restrict movement and will not provide optimum levels of protection and comfort. * The shoe should be used for the purpose for which it has been designed. Some facts about feet * Most of the muscles are in your feet. Thus you should wear comfortable shoes. * The body temperature is regulated through your feet * Maximum number of nerves go through your feet. 100% COMFORT GUARANTEED * Quality leather upper and high quality breathable lining materials are used for proper air circulation in shoe for keeping the feet cool and odour free. * Construction of lasts based on extensive survey enabling the lasts/shoes to be manufactured for better fit providing maximum comfort. * Wider Steel and Ultra light Weight Composite Toe caps which provides more room for finger movements enhancing comfort. * Cushioned Insoles providing better comfort. * Shock absorbing PU midsole with low density providing uniform cushioning and comfort. * Light Weight PU for a featherlite feel even during high stress working conditions.
Item No .: 2080 - 62 Size : 36 - 47 (5-13) Soles : 2080 Dual Density PU SAFETY FEATURES Abrasion Resistant Acid Resistant Anti Static Insole Excellent Shock Absorber Fine Leather Light Weight Oil Resistant Slip Resistant Sole Steel toe / Kavlar Steel Toe Cap ADDITIONAL PRODUCT INFO OVERVIEW Product Name : Safety Boot Standard : S3 Sizes : 36 - 47 (5-13) Colors : Black AVAILABLE OPTIONS Product Number : 2080 - 62 Standard : S1, S1P, S2, S3 Toe : Steel Midsole : Steel Sole : Dual or Mono Color : Black / Brown MATERIALS Upper : Water Resistant Nubuck Lining : CAMBRELLA 100% polyamide, Breathable, absorbing and releasing moisture, Abrasion Resistant , Odour free, Toe : Steel Midsole : Steel Footbed / Socks : Felt Antistatic Sole : 2080 Dual Density PU Certified : EN ISO 20345: 2011 BOOT CARE * Clean your footwear regularly using high quality products that are suitable for the cleaning purpose. NEVER use caustic or corrosive cleaning agents. * When footwear is not in use clean the sole and store in a well-ventilated area. Never store the footwear underneath heavy items or in contact with sharp objects. If the footwear is wet allow it to dry slowly and naturally away from direct heat sources before storage. * To put on and take off footwear always fully undo fastening systems. Use a shoe horn to wear shoes. Only wear footwear of a suitable size. Products which are either too loose or too tight will restrict movement and will not provide optimum levels of protection and comfort. * The shoe should be used for the purpose for which it has been designed. Some facts about feet- * Most of the muscles are in your feet. Thus you should wear comfortable shoes. * The body temperature is regulated through your feet * Maximum number of nerves go through your feet. 100% COMFORT GUARANTEED * Quality leather upper and high quality breathable lining materials are used for proper air circulation in shoe for keeping the feet cool and odour free. * Construction of lasts based on extensive survey enabling the lasts/shoes to be manufactured for better fit providing maximum comfort. * Wider Steel and Ultra light Weight Composite Toe caps which provides more room for finger movements enhancing comfort. * Cushioned Insoles providing better comfort. * Shock absorbing PU midsole with low density providing uniform cushioning and comfort. * Light Weight PU for a featherlite feel even during high stress working conditions.
Item No .: 2080 - 68 Size : 36 - 47 (5-13) Soles : 2080 Dual Density PU SAFETY FEATURES Steel Toe Cap Oil Resistant Shock Absorber Anti Static Insole Anti Skid ADDITIONAL PRODUCT INFO OVERVIEW Product Name : Safety Shoe Standard : S1 Sizes : 36-47 (5-13) Colors : D Grey AVAILABLE OPTIONS Product Number : 2080-68 Standard : S1, S1P, S2, S3 Toe : Steel Midsole : Steel Sole : Dual Or Mono Color : D Grey / Blue / Tan MATERIALS Upper : Water Repellant Nubuck, Suede and Breathable Textile Lining : Textile, Breathable, Absorbs and Release moisture, Abrasion Resistant Toe : Steel Footbed / Socks : Padded Antistatic Sole : 2080 Dual Density PU Certified : EN ISO 20345: 2011 BOOT CARE * Clean your footwear regularly using high quality products that are suitable for the cleaning purpose. NEVER use caustic or corrosive cleaning agents. * When footwear is not in use clean the sole and store in a well-ventilated area. Never store the footwear underneath heavy items or in contact with sharp objects. If the footwear is wet allow it to dry slowly and naturally away from direct heat sources before storage. * To put on and take off footwear always fully undo fastening systems. Use a shoe horn to wear shoes. Only wear footwear of a suitable size. Products which are either too loose or too tight will restrict movement and will not provide optimum levels of protection and comfort. * The shoe should be used for the purpose for which it has been designed. Some facts about feet- * Most of the muscles are in your feet. Thus you should wear comfortable shoes. * The body temperature is regulated through your feet * Maximum number of nerves go through your feet. 100% COMFORT GUARANTEED * Quality leather upper and high quality breathable lining materials are used for proper air circulation in shoe for keeping the feet cool and odour free. * Construction of lasts based on extensive survey enabling the lasts/shoes to be manufactured for better fit providing maximum comfort. * Wider Steel and Ultra light Weight Composite Toe caps which provides more room for finger movements enhancing comfort. * Cushioned Insoles providing better comfort. * Shock absorbing PU midsole with low density providing uniform cushioning and comfort. * Light Weight PU for a featherlite feel even during high stress working conditions.
Item No .: 2080 - 150 Size : 36 - 47 (5-13) Moq : N/A Soles : 2080 Dual Density PU SAFETY FEATURES Anti Skid Anti Static Insole Oil Resistant Shock Absorber Steel Toe Cap ADDITIONAL PRODUCT INFO OVERVIEW Product Name : Safety Boot Standard : S1 Sizes : 36 - 47 (5-13) Colors : Grey AVAILABLE OPTIONS Product Number : 2080 - 150 Standard : S1, S1P, S2, S3 Toe : Steel Midsole : Steel Sole : Dual or Mono Color : As Per Pic MATERIALS Upper : Water Repellant Nubuck, Suede and Breathable Textile Lining : Textile, Breathable, Abdosrbs and Release moisture, Abrasion Resistant Toe : Steel Footbed / Socks : Moulded Cambrella and EVA. Antistatic Sole : 2080 Dual Density PU Certified : EN ISO 20345: 2011 BOOT CARE * Clean your footwear regularly using high quality products that are suitable for the cleaning purpose. NEVER use caustic or corrosive cleaning agents. * When footwear is not in use clean the sole and store in a well-ventilated area. Never store the footwear underneath heavy items or in contact with sharp objects. If the footwear is wet allow it to dry slowly and naturally away from direct heat sources before storage. * To put on and take off footwear always fully undo fastening systems. Use a shoe horn to wear shoes. Only wear footwear of a suitable size. Products which are either too loose or too tight will restrict movement and will not provide optimum levels of protection and comfort. * The shoe should be used for the purpose for which it has been designed. Some facts about feet- * Most of the muscles are in your feet. Thus you should wear comfortable shoes. * The body temperature is regulated through your feet * Maximum number of nerves go through your feet. 100% COMFORT GUARANTEED * Quality leather upper and high quality breathable lining materials are used for proper air circulation in shoe for keeping the feet cool and odour free. * Construction of lasts based on extensive survey enabling the lasts/shoes to be manufactured for better fit providing maximum comfort. * Wider Steel and Ultra light Weight Composite Toe caps which provides more room for finger movements enhancing comfort. * Cushioned Insoles providing better comfort. * Shock absorbing PU midsole with low density providing uniform cushioning and comfort. * Light Weight PU for a featherlite feel even during high stress working conditions.
Item No. : 2080-181 Size : 36 - 47 (5-13) Moq : N/A Soles : 2080 Dual Density PU SAFETY FEATURES Abrasion Resistant Acid Resistant Anti Static Insole Excellent Shock Absorber Fine Leather Light Weight Slip Resistant Sole Steel toe / Kavlar Steel Toe Cap ADDITIONAL PRODUCT INFO OVERVIEW Product Name: Safety Boot Standard : S1P Sizes : 36 - 47 (5-13) Colors : Black AVAILABLE OPTIONS Product Number : 2080-181 Standard : S1, S1P, S2, S3 Toe : Steel Midsole : Steel Sole : Dual or Mono Color : Black / Brown MATERIALS Upper : Water Repellant Nubuck Lining : Textile, Breathable, Absorbs And Release Moisture, Abrasion Resistant Toe : Steel Midsole: Steel Footbed / Socks : Cambrella And Eva. Antistatic Sole : 2080 Dual Density Pu Certified : EN ISO 20345:2011 BOOT CARE * Clean your footwear regularly using high quality products that are suitable for the cleaning purpose. NEVER use caustic or corrosive cleaning agents. * When footwear is not in use clean the sole and store in a well-ventilated area. Never store the footwear underneath heavy items or in contact with sharp objects. If the footwear is wet allow it to dry slowly and naturally away from direct heat sources before storage. * To put on and take off footwear always fully undo fastening systems. Use a shoe horn to wear shoes. Only wear footwear of a suitable size. Products which are either too loose or too tight will restrict movement and will not provide optimum levels of protection and comfort. * The shoe should be used for the purpose for which it has been designed. Some facts about feet- * Most of the muscles are in your feet. Thus you should wear comfortable shoes. * The body temperature is regulated through your feet * Maximum number of nerves go through your feet. 100% COMFORT GUARANTEED * Quality leather upper and high quality breathable lining materials are used for proper air circulation in shoe for keeping the feet cool and odour free. * Construction of lasts based on extensive survey enabling the lasts/shoes to be manufactured for better fit providing maximum comfort. * Wider Steel and Ultra light Weight Composite Toe caps which provides more room for finger movements enhancing comfort. * Cushioned Insoles providing better comfort. * Shock absorbing PU midsole with low density providing uniform cushioning and comfort. * Light Weight PU for a featherlite feel even during high stress working conditions.
Item No .: 3003-107 Size : 36 - 48 Moq : N/A Soles : 3003 Dual Density PU SAFETY FEATURES Abrasion Resistant Acid Resistant Anti Static Insole Excellent Shock Absorber Fine Leather Light Weight Slip Resistant Sole Steel Toe Cap ADDITIONAL PRODUCT INFO OVERVIEW Product Name : Safety Boot Standard : S1 Sizes : 36 - 48 Colors : Black AVAILABLE OPTIONS Product Number : 3003-107 Standard : S1, S1P, S2, S3 Toe : Steel / Composite Midsole : Steel / Metal Free Sole : Dual or Mono Color : As per pic MATERIALS Upper : Water Repellant Smooth Leather and Synthetic Lining : Textile, Breathable, Absorbs and Release moisture, Abrasion Resistant Toe : Steel Footbed / Socks : Moulded Cambrella and EVA. Antistatic Sole : 3003 Dual Density PU Certified : EN ISO 20345: 2011 BOOT CARE * Clean your footwear regularly using high quality products that are suitable for the cleaning purpose. NEVER use caustic or corrosive cleaning agents. * When footwear is not in use clean the sole and store in a well-ventilated area. Never store the footwear underneath heavy items or in contact with sharp objects. If the footwear is wet allow it to dry slowly and naturally away from direct heat sources before storage. * To put on and take off footwear always fully undo fastening systems. Use a shoe horn to wear shoes. Only wear footwear of a suitable size. Products which are either too loose or too tight will restrict movement and will not provide optimum levels of protection and comfort. * The shoe should be used for the purpose for which it has been designed. Some facts about feet- * Most of the muscles are in your feet. Thus you should wear comfortable shoes. * The body temperature is regulated through your feet * Maximum number of nerves go through your feet. 100% COMFORT GUARANTEED * Quality leather upper and high quality breathable lining materials are used for proper air circulation in shoe for keeping the feet cool and odour free. * Construction of lasts based on extensive survey enabling the lasts/shoes to be manufactured for better fit providing maximum comfort. * Wider Steel and Ultra light Weight Composite Toe caps which provides more room for finger movements enhancing comfort. * Cushioned Insoles providing better comfort. * Shock absorbing PU midsole with low density providing uniform cushioning and comfort. * Light Weight PU for a featherlite feel even during high stress working conditions.
Item No. : 7198 - 330 Size : 39 - 48 (5-14) Soles : 7198 Dual Density PU SAFETY FEATURES Abrasion Resistant Acid Resistant Anti Static Insole Excellent Shock Absorber Fine Leather Light Weight Slip Resistant Sole Steel Toe Cap ADDITIONAL PRODUCT INFO OVERVIEW Product Name : Safety Clog Standard : S1 Sizes : 39 - 48 (5-14) Colors : Black AVAILABLE OPTIONS Product Number : 7198 - 330 Standard : S1, S1P, S2, S3 Toe : Steel Midsole : Steel Sole : Dual or Mono Color : Black / Brown / White MATERIALS Upper : Water Repellant Smooth Haircell Lining : CAMBRELLA 100% polyamide, Breathable, absorbing and releasing moisture, Abrasion Resistant , Odour free, Toe : Steel Footbed / Socks : Cambrella and EVA. Antistatic Sole : 7198 Dual Density PU Certified : EN ISO 20345:2011 BOOT CARE * Clean your footwear regularly using high quality products that are suitable for the cleaning purpose. NEVER use caustic or corrosive cleaning agents. * When footwear is not in use clean the sole and store in a well-ventilated area. Never store the footwear underneath heavy items or in contact with sharp objects. If the footwear is wet allow it to dry slowly and naturally away from direct heat sources before storage. * To put on and take off footwear always fully undo fastening systems. Use a shoe horn to wear shoes. Only wear footwear of a suitable size. Products which are either too loose or too tight will restrict movement and will not provide optimum levels of protection and comfort. * The shoe should be used for the purpose for which it has been designed. Some facts about feet- * Most of the muscles are in your feet. Thus you should wear comfortable shoes. * The body temperature is regulated through your feet * Maximum number of nerves go through your feet. 100% COMFORT GUARANTEED * Quality leather upper and high quality breathable lining materials are used for proper air circulation in shoe for keeping the feet cool and odour free. * Construction of lasts based on extensive survey enabling the lasts/shoes to be manufactured for better fit providing maximum comfort. * Wider Steel and Ultra light Weight Composite Toe caps which provides more room for finger movements enhancing comfort. * Cushioned Insoles providing better comfort. * Shock absorbing PU midsole with low density providing uniform cushioning and comfort. * Light Weight PU for a featherlite feel even during high stress working conditions.
Item No. : 3003 - 83 Size : 36 - 48 Soles : 3003 Dual Density PU SAFETY FEATURES Abrasion Resistant Acid Resistant Anti Static Insole Excellent Shock Absorber Fine Leather Light Weight Slip Resistant Sole Steel toe / Kavlar Steel Toe Cap ADDITIONAL PRODUCT INFO OVERVIEW Product Name: Safety Boot Standard : S1P Sizes : 36 - 48 Colors : Black AVAILABLE OPTIONS Product Number : 3003-83 Standard : S1, S1P, S2, S3 Toe : Steel / Composite Midsole : Steel / Metal Free Sole : Dual or Mono Color : Black / Brown MATERIALS Upper : Water Repellant Smooth Haircell and Nubuck Lining : Textile, Breathable, Absorbs and Release moisture, Abrasion Resistant Toe : Steel Midsole : Steel Footbed / Socks : Moulded Cambrella and EVA. Antistatic Sole : 3003 Dual Density PU Certified : EN ISO 20345: 2011 BOOT CARE * Clean your footwear regularly using high quality products that are suitable for the cleaning purpose. NEVER use caustic or corrosive cleaning agents. * When footwear is not in use clean the sole and store in a well-ventilated area. Never store the footwear underneath heavy items or in contact with sharp objects. If the footwear is wet allow it to dry slowly and naturally away from direct heat sources before storage. * To put on and take off footwear always fully undo fastening systems. Use a shoe horn to wear shoes. Only wear footwear of a suitable size. Products which are either too loose or too tight will restrict movement and will not provide optimum levels of protection and comfort. * The shoe should be used for the purpose for which it has been designed. Some facts about feet- * Most of the muscles are in your feet. Thus you should wear comfortable shoes. * The body temperature is regulated through your feet * Maximum number of nerves go through your feet. 100% COMFORT GUARANTEED * Quality leather upper and high quality breathable lining materials are used for proper air circulation in shoe for keeping the feet cool and odour free. * Construction of lasts based on extensive survey enabling the lasts/shoes to be manufactured for better fit providing maximum comfort. * Wider Steel and Ultra light Weight Composite Toe caps which provides more room for finger movements enhancing comfort. * Cushioned Insoles providing better comfort. * Shock absorbing PU midsole with low density providing uniform cushioning and comfort. * Light Weight PU for a featherlite feel even during high stress working conditions.
Item No .: 3003 - 52 Size : 36 - 48 Moq : N/A Soles : 3003 Dual Density PU SAFETY FEATURES Abrasion Resistant Acid Resistant Anti Static Insole Excellent Shock Absorber Fine Leather Light Weight Oil Resistant Slip Resistant Sole Steel toe / Kavlar Steel Toe Cap Water Proof ADDITIONAL PRODUCT INFO OVERVIEW Product Name : Safety Boot Standard : S3 Sizes : 36 - 48 Colors : Black AVAILABLE OPTIONS Product Number : 3003-52 Standard : S1, S1P, S2, S3 Toe : Steel / Composite Midsole: Steel / Metal Free Sole : Dual or Mono Color : Black / Brown MATERIALS Upper : Water Resistant Nubuck Lining : Soft Fur, Absorbs and Release moisture, Abrasion Resistant Toe : Steel Midsole : Steel Footbed / Socks : Moulded Cambrella and EVA. Antistatic Sole : 3003 Dual Density PU Certified : EN ISO 20345: 2011 BOOT CARE * Clean your footwear regularly using high quality products that are suitable for the cleaning purpose. NEVER use caustic or corrosive cleaning agents. * When footwear is not in use clean the sole and store in a well-ventilated area. Never store the footwear underneath heavy items or in contact with sharp objects. If the footwear is wet allow it to dry slowly and naturally away from direct heat sources before storage. * To put on and take off footwear always fully undo fastening systems. Use a shoe horn to wear shoes. Only wear footwear of a suitable size. Products which are either too loose or too tight will restrict movement and will not provide optimum levels of protection and comfort. * The shoe should be used for the purpose for which it has been designed. Some facts about feet- * Most of the muscles are in your feet. Thus you should wear comfortable shoes. * The body temperature is regulated through your feet * Maximum number of nerves go through your feet. 100% COMFORT GUARANTEED * Quality leather upper and high quality breathable lining materials are used for proper air circulation in shoe for keeping the feet cool and odour free. * Construction of lasts based on extensive survey enabling the lasts/shoes to be manufactured for better fit providing maximum comfort. * Wider Steel and Ultra light Weight Composite Toe caps which provides more room for finger movements enhancing comfort. * Cushioned Insoles providing better comfort. * Shock absorbing PU midsole with low density providing uniform cushioning and comfort. * Light Weight PU for a featherlite feel even during high stress working conditions
Item No .: 2058-15 Size : 39 - 46 (5-12) Moq : N/A Soles : 2058 Mono Density PU SAFETY FEATURES Abrasion Resistant Acid Resistant Anti Static Insole Excellent Shock Absorber Fine Leather Light Weight Slip Resistant Sole Steel Toe Cap ADDITIONAL PRODUCT INFO OVERVIEW Product Name : Safety Boot Standard : S1 Sizes : 39 - 46 (5-12) Colors : Black AVAILABLE OPTIONS Product Number : 2058-15 Standard : S1, S1P, S2, S3 Toe : Steel Midsole : Steel Sole : Mono Color : Black / Brown MATERIALS Upper : Water Reppellant printed Leather Toe : Steel Footbed / Socks : Cambrella and EVA. Antistatic Sole : 2058 Mono Density PU CERTIFIED: EN ISO 20345:2011 BOOT CARE * Clean your footwear regularly using high quality products that are suitable for the cleaning purpose. NEVER use caustic or corrosive cleaning agents. * When footwear is not in use clean the sole and store in a well-ventilated area. Never store the footwear underneath heavy items or in contact with sharp objects. If the footwear is wet allow it to dry slowly and naturally away from direct heat sources before storage. * To put on and take off footwear always fully undo fastening systems. Use a shoe horn to wear shoes. Only wear footwear of a suitable size. Products which are either too loose or too tight will restrict movement and will not provide optimum levels of protection and comfort. * The shoe should be used for the purpose for which it has been designed. Some facts about feet- * Most of the muscles are in your feet. Thus you should wear comfortable shoes. * The body temperature is regulated through your feet * Maximum number of nerves go through your feet. 100% COMFORT GUARANTEED * Quality leather upper and high quality breathable lining materials are used for proper air circulation in shoe for keeping the feet cool and odour free. * Construction of lasts based on extensive survey enabling the lasts/shoes to be manufactured for better fit providing maximum comfort. * Wider Steel and Ultra light Weight Composite Toe caps which provides more room for finger movements enhancing comfort. * Cushioned Insoles providing better comfort. * Shock absorbing PU midsole with low density providing uniform cushioning and comfort. * Light Weight PU for a featherlite feel even during high stress working conditions.
Item No .: 7198-354 Size : 39 - 48 (5-14) Moq : N/A Soles : 7198 Dual Density PU SEND ENQUIRY SAFETY FEATURES Abrasion Resistant Acid Resistant Anti Static Insole Excellent Shock Absorber Fine Leather Light Weight Oil Resistant Slip Resistant Sole Steel toe / Kavlar Steel Toe Cap ADDITIONAL PRODUCT INFO OVERVIEW Product Name : Safety Shoe Standard : S3 Sizes : 39 - 48 (5-14) Colors : Black AVAILABLE OPTIONS Product Number : 7198 - 354 Standard : S1, S1P, S2, S3 Toe : Steel Midsole : Steel Sole : Dual or Mono Color : Black / Brown MATERIALS Upper : Water Resistant Smooth Haircell & Helcore Lining : Soft Buff Leather White Toe : Steel Midsole : Steel Footbed / Socks : Cambrella and EVA. Antistatic Sole : 7198 Dual Density PU Certified : EN ISO 20345:2011 BOOT CARE * Clean your footwear regularly using high quality products that are suitable for the cleaning purpose. NEVER use caustic or corrosive cleaning agents. * When footwear is not in use clean the sole and store in a well-ventilated area. Never store the footwear underneath heavy items or in contact with sharp objects. If the footwear is wet allow it to dry slowly and naturally away from direct heat sources before storage. * To put on and take off footwear always fully undo fastening systems. Use a shoe horn to wear shoes. Only wear footwear of a suitable size. Products which are either too loose or too tight will restrict movement and will not provide optimum levels of protection and comfort. * The shoe should be used for the purpose for which it has been designed. Some facts about feet- * Most of the muscles are in your feet. Thus you should wear comfortable shoes. * The body temperature is regulated through your feet * Maximum number of nerves go through your feet 100% COMFORT GUARANTEED * Quality leather upper and high quality breathable lining materials are used for proper air circulation in shoe for keeping the feet cool and odour free. * Construction of lasts based on extensive survey enabling the lasts/shoes to be manufactured for better fit providing maximum comfort. * Wider Steel and Ultra light Weight Composite Toe caps which provides more room for finger movements enhancing comfort. * Cushioned Insoles providing better comfort. * Shock absorbing PU midsole with low density providing uniform cushioning and comfort. * Light Weight PU for a featherlite feel even during high stress working conditions.
Item No .: 3003-100 Size : 36 - 48 Moq : N/A Soles : 3003 Dual Density PU SAFETY FEATURES Abrasion Resistant Acid Resistant Anti Static Insole Excellent Shock Absorber Fine Leather Light Weight Oil Resistant Slip Resistant Sole Steel toe / Kavlar Steel Toe Cap ADDITIONAL PRODUCT INFO OVERVIEW Product Name : Safety Boot Standard : S3 Sizes : 36 - 48 Colors : Black AVAILABLE OPTIONS Product Number : 3003-100 Standard : S1, S1P, S2, S3 Toe : Steel / Composite Midsole : Steel / Metal Free Sole : Dual or Mono Color : Black / Brown MATERIALS Upper: Water Resistant Printed Leather Lining : Soft Fur, Abosrbs and Release moisture, Abrasion Resistant Toe : Steel Midsole : Steel Footbed / Socks : Moulded Cambrella and EVA. Antistatic Sole : 3003 Dual Density PU Certified : EN ISO 20345: 2011 BOOT CARE * Clean your footwear regularly using high quality products that are suitable for the cleaning purpose. NEVER use caustic or corrosive cleaning agents. * When footwear is not in use clean the sole and store in a well-ventilated area. Never store the footwear underneath heavy items or in contact with sharp objects. If the footwear is wet allow it to dry slowly and naturally away from direct heat sources before storage. * To put on and take off footwear always fully undo fastening systems. Use a shoe horn to wear shoes. Only wear footwear of a suitable size. Products which are either too loose or too tight will restrict movement and will not provide optimum levels of protection and comfort. * The shoe should be used for the purpose for which it has been designed. Some facts about feet- * Most of the muscles are in your feet. Thus you should wear comfortable shoes. * The body temperature is regulated through your feet * Maximum number of nerves go through your feet 100% COMFORT GUARANTEED * Quality leather upper and high quality breathable lining materials are used for proper air circulation in shoe for keeping the feet cool and odour free. * Construction of lasts based on extensive survey enabling the lasts/shoes to be manufactured for better fit providing maximum comfort. * Wider Steel and Ultra light Weight Composite Toe caps which provides more room for finger movements enhancing comfort. * Cushioned Insoles providing better comfort. * Shock absorbing PU midsole with low density providing uniform cushioning and comfort. * Light Weight PU for a featherlite feel even during high stress working conditions.
Item No.: 2080 - 190 Size : 36 - 47 (5-13) Moq : N/A Soles : 2080 Dual Density PU SAFETY FEATURES Abrasion Resistant Acid Resistant Anti Static Insole Excellent Shock Absorber Fine Leather Light Weight Oil Resistant Slip Resistant Sole Steel toe / Kavlar Steel Toe Cap ADDITIONAL PRODUCT INFO OVERVIEW Product Name : Safety Boot Standard : S3 Sizes : 36 - 47 (5-13) Colors : Black AVAILABLE OPTIONS Product Number : 2080 - 190 Standard : S1, S1P, S2, S3 Toe : Steel Midsole : Steel Sole : Dual or Mono Color : Black / Brown MATERIALS Upper : Water Resistant Smooth Haircell Lining : Textile, Breathable, Absorbs and Release moisture, Abrasion Resistant Toe : Steel Midsole : Steel Footbed / Socks : Moulded Cambrella and EVA. Antistatic Sole : 2080 Dual Density PU CERTIFIED: EN ISO 20345:2011 BOOT CARE * Clean your footwear regularly using high quality products that are suitable for the cleaning purpose. NEVER use caustic or corrosive cleaning agents. * When footwear is not in use clean the sole and store in a well-ventilated area. Never store the footwear underneath heavy items or in contact with sharp objects. If the footwear is wet allow it to dry slowly and naturally away from direct heat sources before storage. * To put on and take off footwear always fully undo fastening systems. Use a shoe horn to wear shoes. Only wear footwear of a suitable size. Products which are either too loose or too tight will restrict movement and will not provide optimum levels of protection and comfort. * The shoe should be used for the purpose for which it has been designed. Some facts about feet- * Most of the muscles are in your feet. Thus you should wear comfortable shoes. * The body temperature is regulated through your feet * Maximum number of nerves go through your feet. 100% COMFORT GUARANTEED *Quality leather upper and high quality breathable lining materials are used for proper air circulation in shoe for keeping the feet cool and odour free. * Construction of lasts based on extensive survey enabling the lasts/shoes to be manufactured for better fit providing maximum comfort. * Wider Steel and Ultra light Weight Composite Toe caps which provides more room for finger movements enhancing comfort. * Cushioned Insoles providing better comfort. * Shock absorbing PU midsole with low density providing uniform cushioning and com
Item No.: 2058-58 Size : 39 - 46 (5-12) Moq : N/A Soles : 2058 Mono Density PU SAFETY FEATURES Abrasion Resistant Acid Resistant Anti Static Insole Excellent Shock Absorber Fine Leather Light Weight Slip Resistant Sole Steel Toe Cap ADDITIONAL PRODUCT INFO OVERVIEW Product Name : Safety Shoe Standard : S1 Sizes : 39-46 (5-12) Colors : Tan AVAILABLE OPTIONS Product Number: 2058-58 STANDARD: S1, S1P, S2, S3 Toe: Steel MIDSOLE: Steel Sole: Mono COLOR: Black / Brown MATERIALS UPPER: Water Repellant Nubuck & Cow Leather LINING: CAMBRELLA 100% polyamide, Breathable, absorbing and releasing moisture, Abrasion Resistant , Odour free, Toe : Steel Footbed / Socks : Moulded Cambrella and EVA. Antistatic Sole : 2058 Mono Density PU Certified : EN ISO 20345:2011 BOOT CARE * Clean your footwear regularly using high quality products that are suitable for the cleaning purpose. NEVER use caustic or corrosive cleaning agents. * When footwear is not in use clean the sole and store in a well-ventilated area. Never store the footwear underneath heavy items or in contact with sharp objects. If the footwear is wet allow it to dry slowly and naturally away from direct heat sources before storage. * To put on and take off footwear always fully undo fastening systems. Use a shoe horn to wear shoes. Only wear footwear of a suitable size. Products which are either too loose or too tight will restrict movement and will not provide optimum levels of protection and comfort. * The shoe should be used for the purpose for which it has been designed. Some facts about feet- * Most of the muscles are in your feet. Thus you should wear comfortable shoes. * The body temperature is regulated through your feet * Maximum number of nerves go through your feet. 100% COMFORT GUARANTEED * Quality leather upper and high quality breathable lining materials are used for proper air circulation in shoe for keeping the feet cool and odour free. * Construction of lasts based on extensive survey enabling the lasts/shoes to be manufactured for better fit providing maximum comfort. * Wider Steel and Ultra light Weight Composite Toe caps which provides more room for finger movements enhancing comfort. * Cushioned Insoles providing better comfort. * Shock absorbing PU midsole with low density providing uniform cushioning and comfort. * Light Weight PU for a featherlite feel even during high stress working conditions.
Item No. : 2058-07 Size : 39-48 (5-14) Soles : 2058 Single Density PU sole SAFETY FEATURES Abrasion Resistant Acid Resistant Anti Static Insole Excellent Shock Absorber Fine Leather Light Weight Slip Resistant Sole Steel toe / Kavlar Steel Toe Cap ADDITIONAL PRODUCT INFO OVERVIEW Product Name : Gents Safety Shoes Standard : S1P Sizes : 39 - 48 (5-14) Colors : Black AVAILABLE OPTIONS Product Number : 2058-07 Standard: S1, S1p, S2, S3 Toe : Steel Midsole : Steel/Metal Free Sole : Mono Color: Black /brown MATERIALS Upper : Haircell Smooth Lining : Cambrella Toe : Steel Midsole : Steel Footbed / Socks : Moulded Antistatic Sole : 2058 Single Density PU sole Certified : EN ISO 20345:2011 SRA BOOT CARE * Clean your footwear regularly using high quality products that are suitable for the cleaning purpose. NEVER use caustic or corrosive cleaning agents. * When footwear is not in use clean the sole and store in a well-ventilated area. Never store the footwear underneath heavy items or in contact with sharp objects. If the footwear is wet allow it to dry slowly and naturally away from direct heat sources before storage. * To put on and take off footwear always fully undo fastening systems. Use a shoe horn to wear shoes. Only wear footwear of a suitable size. Products which are either too loose or too tight will restrict movement and will not provide optimum levels of protection and comfort. * The shoe should be used for the purpose for which it has been designed. Some facts about feet- * Most of the muscles are in your feet. Thus you should wear comfortable shoes. * The body temperature is regulated through your feet * Maximum number of nerves go through your feet. 100% COMFORT GUARANTEED * Quality leather upper and high quality breathable lining materials are used for proper air circulation in shoe for keeping the feet cool and odour free. * Construction of lasts based on extensive survey enabling the lasts/shoes to be manufactured for better fit providing maximum comfort. * Wider Steel and Ultra light Weight Composite Toe caps which provides more room for finger movements enhancing comfort. * Cushioned Insoles providing better comfort. * Shock absorbing PU midsole with low density providing uniform cushioning and comfort. * Light Weight PU for a featherlite feel even during high stress working conditions.
Item No.: 3003-98 Size : 36 - 48 Moq : N/A Soles : 3003 Dual Density PU SAFETY FEATURES Anti Skid Anti Static Insole Heat Resistant Sole Oil Resistant Shock Absorber Steel Toe Cap ADDITIONAL PRODUCT INFO OVERVIEW Product Name: Safety Shoe Standard : S1 Sizes : 36 - 48 Colors : Green AVAILABLE OPTIONS Product Number : 3003-98 Standard : S1, S1P, S2, S3 Toe : Steel / Composite Midsole : Steel / Metal Free Sole : Dual Or Mono Color : As per pic MATERIALS Upper : Water Reppellant Suede, Smooth Leather and Mesh Lining : Textile, Breathable, Absorbs and Release moisture, Abrasion Resistant Toe : Steel Footbed / Socks : Moulded Cambrella and EVA. Antistatic Sole : 3003 Dual Density PU Certified : EN ISO 20345: 2011 BOOT CARE * Clean your footwear regularly using high quality products that are suitable for the cleaning purpose. NEVER use caustic or corrosive cleaning agents. * When footwear is not in use clean the sole and store in a well-ventilated area. Never store the footwear underneath heavy items or in contact with sharp objects. If the footwear is wet allow it to dry slowly and naturally away from direct heat sources before storage. * To put on and take off footwear always fully undo fastening systems. Use a shoe horn to wear shoes. Only wear footwear of a suitable size. Products which are either too loose or too tight will restrict movement and will not provide optimum levels of protection and comfort. * The shoe should be used for the purpose for which it has been designed. Some facts about feet- * Most of the muscles are in your feet. Thus you should wear comfortable shoes. * The body temperature is regulated through your feet * Maximum number of nerves go through your feet. 100% COMFORT GUARANTEED * Quality leather upper and high quality breathable lining materials are used for proper air circulation in shoe for keeping the feet cool and odour free. * Construction of lasts based on extensive survey enabling the lasts/shoes to be manufactured for better fit providing maximum comfort. * Wider Steel and Ultra light Weight Composite Toe caps which provides more room for finger movements enhancing comfort. * Cushioned Insoles providing better comfort. * Shock absorbing PU midsole with low density providing uniform cushioning and comfort. * Light Weight PU for a featherlite feel even during high stress working conditions.
