APPLICATION Oxygen and acetylene delivery hose, for welding and technical applications in shipyards, construction sites and manufacturing industries. CONSTRUCTION Black synthetic rubber tube. High tensile textile reinforcement. Blue/RED special rubber cover is abrasion heat and weather resistant. APPLICATION Oxygen and acetylene delivery hose, for welding and technical applications in shipyards, construction sites and manufacturing industries. CONSTRUCTION Black synthetic rubber tube. High tensile textile reinforcement. Blue/RED special rubber cover abrasion heat and weather resistant. Smooth finish. TEMPERATURE RANGE -25 C +80 C Actuation medium: I class - acetylene, propyl hydride, butane, city gas; II class - liquid fuel, benzine A - 72, white spirit, kerosene or their mix; III class- oxygen. Producing pressure: I, II classes - 0,63 MPa (6.3 kgf/cm2); III class- 2,0 MPa (20 kgf/cm2). Efficient at temperature from -35 C up to +70 C. For a cool climate from -55 C up to +70 C. Inside diameter from 6.3 mm up to 12 mm. Length of hoses is agreed with the customer. Superposition of a cotton skeleton by winding method. Hoses meet all requirements of the international standard ISO3821-77.
GOST 5398-76 Pressure Suction And Discharge Hose Detailed Product Description Suction water, oil, acid/alkli and sand hoses. ID from 25mm to 250mm. PRESSURE-ABSORBING RUBBER HOSES, NOT REINFORCED, WITH TEXTILE SKELETON, GOST 5398-76. Hoses with textile skeleton; Metal spiral have the soft cuffs at the ends for joining to armature. GOST 5398-76 Hose pressure-suction with a textile frame and a metal spiral, unreinforced. Suitable for suction and delivery of various liquids, fuels, petroleum-based oils and gases. Two groups of hoses are made, depending on the operating conditions: Group 1 - Suction, Group 2 - Pressure-suction. Sleeves are divided into classes, depending on the purpose and working environment: - Gasolines, diesel fuel, oils for petroleum. basis, B(A) - antistatic design; - Technical water; - Gas, air; - weak solutions of acids and alkalis (concentration up to 20%). Symbol example: Sleeve B-2-25-10 HL GOST 5398-76, where - hose class corresponding to the working environment (Gasoline); 2 - sleeve group (Pressure-suction); 25 - inner diameter (mm); 10 - working pressure in kgf/cm2 (10 kgf/cm2 = 1 MPa); - climatic design for areas with a cold climate. Hoses meet ISO 1823-75 International Standard except stretch at hydraulic pressure and strength at ozone influence definitions.
PRESSURE HOSE WITH TEXTILE FRAME GOST 18698-79 GOST 18698-79 Rubber hose with an integrated load-bearing frame made of textile fibers are used to transport liquids or gases with high pressure and temperature. There are several types of products that different in the resistance of the material to the effects of pumped substances. GOST 18698-79 GOST 18698-79 Rubber hose with an integrated load-bearing frame made of textile fibers are used to transport liquids or gases with high pressure and temperature. There are several types of products that different in the resistance of the material to the effects of pumped substances. The industry produces hoses with different inner diameters, which determine the performance of transporting a gas or liquid medium. Main varieties In accordance with GOST 18698-79, reinforced pressure hoses are divided into groups: �? â?? intended for the transportation of petroleum products and motor fuel (gasoline, diesel fuel and kerosene). Permissible temperature of mineral-based oils being pumped is -35...+100, and other liquids -35...+70. Used for transporting technical water without mechanical impurities, aqueous solutions of acids and alkalis (the share of the active substance is not more than 20%). It is possible to work when the flow is heated up to +50. Products are not used for pumping nitric acid, which destroys rubber walls. Intended for transportation of water heated up to +100. PAR 1 and PAR 2 - designed for pumping saturated water vapor at a temperature of +143C and +175C, respectively. Used to supply air with abrasive mechanical particles, for example, in power systems for sandblasting equipment. Pumping of weak aqueous mixtures of alkalis or acids is allowed. The operating temperature is in the range -35...+50. Additional differences In accordance with the GOST 18698-79 standard, the products have 3 versions for different external conditions. The industry offers products for temperate, tropical and cold climates. When selecting products, the temperature of the ambient air (for outdoor installation) and the transported medium are taken into account. The standard provides for the release of hoses that can withstand gas or liquid pressure of 6.3, 10, 16 and 20 atm. The company has a stock of hoses of the main standard sizes. In the absence of the required quantity of products, the delivery time is from 5 to 10 working days, necessary for the production of the required batch of rubber-reinforced hoses. In the absence of the desired item in the catalog, you should submit a request by e-mail or phone to calculate the delivery time and price of rubber products. Rubber hoses Class "(I)" - Gasoline, kerosene, petroleum-based mineral oils Rubber sleeves Class "" - Antistatic gasoline, kerosene, petroleum-based mineral oils Rubber sleeves Class "B(II)" - Industrial water
UHMWPE CHEMICAL Suction & Discharge Hose 20BAR/300PSI- CSD300 Chemical rubber hose is mainly used for chemical conveyance and chemical sewage treatment in chemical plant, paint factory, pharmaceutical factory, chemical tanker, sewage treatment plant and other industries. It can be used for suction and discharge of most chemicals . Inner Tube:White UHMWPE . Reinforcement: High tensile textile cord with steel wire helix spiraled. Cover:High tensile synthetic abrasion and weather resistant EPDM rubber, Colorful wrapped flat surface or corrugation surface Working Pressure: Constant Pressure 20Bar /300 psi Temperature Range:-40+120 (-40F 248F) Application: Mainly used to suction and discharge 98% chemicals, solvents and corrosive . The rubber hose for chemicals are specially designed for the transfer of chemicals and acids.They are apt for any kind of application where chemicals are transferred through suction or pumping .Now chemical rubber hoses have to bear abrasion,heat and many more aggressive and adverse condition so these are designed using high quality synthetic rubber. Rubber hose is designed to carry material/chemicals in the factories during the production process. Our premium quality rubber hoses are resistant to the material they are carrying .We are one of the best brands in the area of rubber hose manufacturing and our products are trusted worldwide. Superior design for use in chemical plants, ship, barge and tank truck service. Exceptional flexible chemical hose for suction and discharge applications. Designed with fully conductive rubber compounds for added safety, ideal for applications in which static electricity can occur. Exceptional flexible chemical hose for discharge applications for different types of acids, alkalis, esters and ketones. Hose for transfer of aggressive chemicals to hydraulic fracturing blenders in pressure, gravity flow and/ or suction service.The hose is available in several colored covers, to prevent cross contamination on site.
UHMWPE Chemical Suction & Discharge Hose CSD230 Chemical rubber hose is mainly used for chemical conveyance and chemical sewage treatment in chemical plant, paint factory, pharmaceutical factory, chemical tanker, sewage treatment plant and other industries. It can be used for suction and discharge of most chemicals . Construction: Inner Tube:White UHMWPE . Reinforcement: High tensile textile cord with steel wire helix spiraled. Cover:High tensile synthetic abrasion and weather resistant EPDM rubber, Colorful wrapped flat surface or corrugation surface Working Pressure:Constant Pressure 15 Bar /230 psi Temperature Range:-40+120 (-40F 248F) Application:Mainly used to suction and discharge 98% chemicals, solvents and corrosive .The rubber hose for chemicals are specially designed for the transfer of chemicals and acids.They are apt for any kind of application where chemicals are transferred through suction or pumping .Now chemical rubber hoses have to bear abrasion,heat and many more aggressive and adverse condition so these are designed using high quality synthetic rubber.Rubber hose is designed to carry material/chemicals in the factories during the production process.Our premium quality rubber hoses are resistant to the material they are carrying .We are one of the best brands in the area of rubber hose manufacturing and our products are trusted worldwide.Superior design for use in chemical plants, ship, barge and tank truck service.Exceptional flexible chemical hose for suction and discharge applications.Designed with fully conductive rubber compounds for added safety, ideal for applications in which static electricity can occur.Exceptional flexible chemical hose for discharge applications for different types of acids, alkalis, esters and ketones.Hose for transfer of aggressive chemicals to hydraulic fracturing blenders in pressure, gravity flow and/ or suction service.The hose is available in several colored covers, to prevent cross contamination on site.
UHMWPE Chemical Delivery Hose 10BAR /150PSI CD150 Chemical rubber hose is mainly used for chemicals conveyance and chemical sewage treatment in chemical plant, paint factory, pharmaceutical factory, chemical tanker, sewage treatment plant and other industries. It can be used for suction and discharge of most chemicals . Construction: Inner Tube:White UHMWPE . Reinforcement: High tensile textile cord with steel wire helix spiraled. Cover:High tensile synthetic abrasion and weather resistant EPDM rubber, Colorful wrapped flat surface or corrugation surface Working Pressure:Constant Pressure 10 Bar /150 psi Temperature Range:-40+120 (-40 F248 F) Application: Mainly used to suction and discharge 98% chemicals, solvents and corrosive . The rubber hose for chemicals are specially designed for the transfer of chemicals and acids.They are apt for any kind of application where chemicals are transferred through suction or pumping .Now chemical rubber hoses have to bear abrasion,heat and many more aggressive and adverse condition so these are designed using high quality synthetic rubber. Rubber hose is designed to carry material/chemicals in the factories during the production process.Our premium quality rubber hoses are resistant to the material they are carrying .We are one of the best brands in the area of rubber hose manufacturing and our products are trusted worldwide. Superior design for use in chemical plants, ship, barge and tank truck service. Exceptional flexible chemical hose for suction and discharge applications. Designed with fully conductive rubber compounds for added safety, ideal for applications in which static electricity can occur. Exceptional flexible chemical hose for discharge applications for different types of acids, alkalis, esters and ketones. Hose for transfer of aggressive chemicals to hydraulic fracturing blenders in pressure, gravity flow and/ or suction service.The hose is available in several colored covers, to prevent cross contamination on site.
King combination nipple King combination nipple, KC Nipple, is a hose coupling for transition from a hose to pipe, equipment, valves or strainers. Default connection is NPT male thread. KC nipples are also available in grooved end, fixed flange or turnback flange. Sleeves are commonly used to crimp rubber hose or layflat hose on combination nipple for low pressure application. Ferrules and heavy duty KC nipple with interlock groove provide even better crimping. All fittings are available in plated steel, SS304, and SS316. Installation of this is fairly simple and straightforward. Simply slide the Hose into the barb inside and either crimp or lock on with a hose clip depending on application and pressure. The other side a easy screw on will complete the assembly.King Combination Nipples are recommended for 10 bar working pressure discharge and suction service for compatible liquids. They are not for compressible products such as air or nitrogen on size 1 1/4â?³ and above. Customized support:OEM, ODM Brand Name:SNP Model Number;Combination nipples Technics:Casting Connection:Male Shape:Equal, Equal Head Code:Square Type:Combination nipples 2â?³ Material:CARBON STEEL Size:1/4â?³~1â?³ Working Pressure:150PSI Thread:NPT/BSP/BSPP Working Temperature:-20~232 Color:Silver Surface treatment:Sand blast ,grind SIZE 1/4", 3/8" 1/2 " 5/8", 3/4", 1 "1-1/4" 1-1/2 " 2" Material Carbon Steel Type Hose End/male End /female End Thread NPT/BSP
High Temperature Resistant Silicone Heater HOSE SAE J20 Construction: Inner:100% High-quality silicone Cover:silicone Reinforcement: 4ply Polyester/Ar amid fabric Color:Black/Red/Blue/Green/Yellow Construction: Inner:100% High quality silicone Cover:silicone Reinforcement: 4ply Polyester/Ar amid fabric Color:Black/Red/Blue/Green/Yellow Application: Heating and Cooling Systems, CAC Charge-Air-Cooler (Hot & Cold side) ,Turbo Charger Systems & Custom Compressor,Inter-cooler or Intake & Inlet Piping for turbo/ Superchargers. etc
High Temperature Resistant Silicone Hump Hose With Rings SAE J20 Construction: Inner:100% High-quality silicone Cover:silicone Reinforcement: 4ply Polyester/Ar amid fabric Color:Black/Red/Blue/Green/Yellow Construction: Inner:100% High quality silicone Cover:silicone Reinforcement: 4ply Polyester/Ar amid fabric Color:Black/Red/Blue/Green/Yellow Application: Heating and Cooling Systems, CAC Charge-Air-Cooler (Hot & Cold side) ,Turbo Charger Systems & Custom Compressor,Inter-cooler or Intake & Inlet Piping for turbo/ Superchargers. etc
High-Temperature Resistant Silicone Hump Hose SAE J20 Construction: Inner:100% High quality silicone Cover:silicone Reinforcement: 4ply Polyester/Ar amid fabric Color:Black/Red/Blue/Green/Yellow Construction: Inner:100% High quality silicone Cover:silicone Reinforcement: 4ply Polyester/Ar amid fabric Color:Black/Red/Blue/Green/Yellow Application: Heating and Cooling Systems, CAC Charge-Air-Cooler (Hot & Cold side) ,Turbo Charger Systems & Custom Compressor,Inter-cooler or Intake & Inlet Piping for turbo/ Superchargers. etc Characteristic: Good electrical insulating performance No taste, no toxic, eco-friendly. High temperature resistance,aging,operative temperature: - 40 C ~ 220 C Having physical laziness,Good air permeability We offer OEM/ODM, We can 3D design, produce according to your drawings Temperature: -40 ( -104 ) to +220 (+428 )
High Temperature Pressure Silicone 135 Degrees Elbow Reducer Pipe SAE J20 Construction: Inner:100% High quality silicone Cover:silicone Reinforcement: 4ply Polyester/Ar amid fabric Color:Black/Red/Blue/Green/Yellow Construction: Inner:100% High quality silicone Cover:silicone Reinforcement: 4ply Polyester/Ar amid fabric Color:Black/Red/Blue/Green/Yellow Application: Heating and Cooling Systems, CAC Charge-Air-Cooler (Hot & Cold side) ,Turbo Charger Systems & Custom Compressor,Inter-cooler or Intake & Inlet Piping for turbo/ Superchargers. etc. Characteristic: Good electrical insulating performance No taste, no toxic, eco-friendly. High temperature resistance,aging,operative temperature: - 40 C ~ 220 C Having physical laziness,Good air permeability We offer OEM/ODM, We can 3D design, produce according to your drawings Temperature: -40 ( -104 ) to +220 (+428 )
Silicone 90 Degrees Elbow Reducer Hose SAE J20 Construction: Inner:100% High quality silicone Cover:silicone Reinforcement: 4ply Polyester/Ar amid fabric Color:Black/Red/Blue/Green/Yellow Construction: Inner:100% High quality silicone Cover:silicone Reinforcement: 4ply Polyester/Ar amid fabric Color:Black/Red/Blue/Green/Yellow Application: Heating and Cooling Systems, CAC Charge-Air-Cooler (Hot & Cold side) ,Turbo Charger Systems & Custom Compressor,Inter-cooler or Intake & Inlet Piping for turbo/ Superchargers. etc. Silicone 90 Degrees Elbow Reducer Hose SAE J20 Construction: Inner:100% High quality silicone Cover:silicone Reinforcement: 4ply Polyester/Ar amid fabric Color:Black/Red/Blue/Green/Yellow Construction: Inner:100% High quality silicone Cover:silicone Reinforcement: 4ply Polyester/Ar amid fabric Color:Black/Red/Blue/Green/Yellow Application: Heating and Cooling Systems, CAC Charge-Air-Cooler (Hot & Cold side) ,Turbo Charger Systems & Custom Compressor,Inter-cooler or Intake & Inlet Piping for turbo/ Superchargers. etc. Characteristic: Good electrical insulating performance No taste, no toxic, eco-friendly. High temperature resistance,aging,operative temperature: - 40 �° C ~ 220 �° C Having physical laziness,Good air permeability We offer OEM/ODM, We can 3D design, produce according to your drawings Temperature: -40 ( -104 ) to +220 (+428 )
High-Pressure Silicone 45 Degrees Elbow Reducer SAE J20 Construction: Inner:100% High quality silicone Cover:silicone Reinforcement: 4ply Polyester/Ar amid fabric Color:Black/Red/Blue/Green/Yellow Construction: Inner:100% High quality silicone Cover:silicone Reinforcement: 4ply Polyester/Ar amid fabric Color:Black/Red/Blue/Green/Yellow Application: Heating and Cooling Systems, CAC Charge-Air-Cooler (Hot & Cold side) ,Turbo Charger Systems & Custom Compressor,Inter-cooler or Intake & Inlet Piping for turbo/ Superchargers. etc. Characteristic: Good electrical insulating performance No taste, no toxic, eco-friendly. High temperature resistance,aging,operative temperature: - 40 C ~ 220 C Having physical laziness,Good air permeability We offer OEM/ODM, We can 3D design, produce according to your drawings Temperature: -40 ( -104 ) to +220 (+428 )
Flexible High Temperature Silicone 180 Degrees Elbow Hose SAE J20 Construction: Inner:100% High quality silicone Cover:silicone Reinforcement: 4ply Polyester/Ar amid fabric Color:Black/Red/Blue/Green/Yellow Construction: Inner:100% High quality silicone Cover:silicone Reinforcement: 4ply Polyester/Ar amid fabric Color:Black/Red/Blue/Green/Yellow Application: Heating and Cooling Systems, CAC Charge-Air-Cooler (Hot & Cold side) ,Turbo Charger Systems & Custom Compressor,Inter-cooler or Intake & Inlet Piping for turbo/ Superchargers. etc. Characteristic: Good electrical insulating performance No taste, no toxic, eco-friendly. High temperature resistance,aging,operative temperature: - 40 C ~ 220 C Having physical laziness,Good air permeability We offer OEM/ODM, We can 3D design, produce according to your drawings Temperature: -40 ( -104 ) to +220 (+428 )
High Pressure High Temperature Silicone 135 Degrees Elbow Hose SAEJ20 Construction: Inner:100% High-quality silicone Cover: silicone Reinforcement: 4ply Polyester/Ar amid fabric Color:Black/Red/Blue/Green/Yellow Characteristic: Good electrical insulating performance No taste, no toxic, eco-friendly. High temperature resistance,aging,operative temperature: - 40 C ~ 220 C Having physical laziness,Good air permeability We offer OEM/ODM, We can 3D design, produce according to your drawings Temperature: -40 ( -104 ) to +220 (+428 )
Flexible High Pressure Silicone 90 Degrees Elbow Hose SAEJ20 Construction: Inner:100% High quality silicone Cover:silicone Reinforcement: 4ply Polyester/Ar amid fabric Color:Black/Red/Blue/Green/Yellow Construction: Inner:100% High quality silicone Cover:silicone Reinforcement: 4ply Polyester/Ar amid fabric Color:Black/Red/Blue/Green/Yellow Application: Heating and Cooling Systems, CAC Charge-Air-Cooler (Hot & Cold side) ,Turbo Charger Systems & Custom Compressor,Inter-cooler or Intake & Inlet Piping for turbo/ Superchargers. etc. Characteristic: Good electrical insulating performance No taste, no toxic, eco-friendly. High temperature resistance,aging,operative temperature: - 40 C ~ 220 C Having physical laziness,Good air permeability We offer OEM/ODM, We can 3D design, produce according to your drawings Temperature: -40 ( -104 ) to +220 (+428 )
High Pressure Flexible Silicone 67 Degrees Elbow Hose SAE J20 Construction: Inner:100% High quality silicone Cover:silicone Reinforcement: 4ply Polyester/Ar amid fabric Color:Black/Red/Blue/Green/Yellow Construction: Inner:100% High quality silicone Cover:silicone Reinforcement: 4ply Polyester/Ar amid fabric Color:Black/Red/Blue/Green/Yellow Application: Heating and Cooling Systems, CAC Charge-Air-Cooler (Hot & Cold side) ,Turbo Charger Systems & Custom Compressor,Inter-cooler or Intake & Inlet Piping for turbo/ Superchargers. etc. Characteristic: Good electrical insulating performance No taste, no toxic, eco-friendly. High temperature resistance,aging,operative temperature: - 40 C ~ 220 C Having physical laziness,Good air permeability We offer OEM/ODM, We can 3D design, produce according to your drawings Temperature: -40 ( -104 ) to +220 (+428 )
High Temperature Pressure Silicone 45 Degrees Elbow Hose SAEJ20 Construction: Inner:100% High quality silicone Cover:silicone Reinforcement: 4 ply Polyester/Aramid fabric Color:Black/Red/Blue/Green/Yellow Application: Polyester Material suitable for Coolant / Glycol, Water, Steam, Oi Mist, Air, Marine, Automotive Construction: Inner:100% High quality silicone Cover:silicone Reinforcement: 4ply Polyester/Ar amid fabric Color:Black/Red/Blue/Green/Yellow Application: Heating and Cooling Systems, CAC Charge-Air-Cooler (Hot & Cold side) ,Turbo Charger Systems & Custom Compressor,Inter-cooler or Intake & Inlet Piping for turbo/ Superchargers. etc. Characteristic: Good electrical insulating performance No taste, no toxic, eco-friendly. High temperature resistance,aging,operative temperature: - 40 C ~ 220 C Having physical laziness,Good air permeability We offer OEM/ODM, We can 3D design, produce according to your drawings Temperature: -40 ( -104 ) to +220 (+428 )
High-Temperature Pressure Silicone Straight Reducer Coupler (76MM) Construction: Inner:100% High-quality silicone Cover: silicone Reinforcement:4ply Polyester/Aramid fabric Color:Black/Red/Blue/Green/Yellow Construction: Inner:100% High quality silicone Cover:silicone Reinforcement: 4ply Polyester/Ar amid fabric Color:Black/Red/Blue/Green/Yellow Application: Heating and Cooling Systems, CAC Charge-Air-Cooler (Hot & Cold side) ,Turbo Charger Systems & Custom Compressor,Inter-cooler or Intake & Inlet Piping for turbo/ Superchargers. etc. Characteristic: Good electrical insulating performance No taste, no toxic, eco-friendly. High temperature resistance,aging,operative temperature: - 40 C ~ 220 C Having physical laziness,Good air permeability We offer OEM/ODM, We can 3D design, produce according to your drawings Temperature: -40 ( -104 ) to +220 (+428 )
High-Temperature Flexible Silicone One Meter Hose Construction Inner tube: Silicone Reinforced: 4 layer of fabric Outside tube: Silicone Temperature: - 60C to +260C High temperature high pressure silicone one meter hose Construction Inner tube: Silicone Reinforced: 4 layer of fabric Outside tube: Silicone Temperature: - 60C to +260C
