Cognex 3D displacement sensors optimize product quality by providing three-dimensional inspection of your products. The sensors are factory calibrated and include industry-leading Cognex machine vision software with powerful 2D and 3D toolsets and a compact, IP65-rated design that withstands even the harshest factory environments. Benefits: Complete 2D and 3D machine vision solution. Results in real-world units (mm). Contrast independent inspection. Ability to combine 3D and 2D cameras. World-class 3D and 2D vision tools. World-class 3D and 2D vision tools.
The Advantage 100 smart camera offers OEMs the ability to leverage the power of Cognex vision and ID tools in an embedded product that is compact (23mm x 44mm x 54mm), flexible but also cost effective. In addition, the Advantage 100 smart camera allows you to tailor optics, lighting and communications for maximum flexibility to meet the specific requirements of your volume OEM integration.
The AE2 Advantage vision engine offers OEMs the ability to leverage the power of Cognex vision and ID tools in a product that is exceptionally compact (14.5mm x 29.1mm x 20.5mm), flexible but also cost effective. Unlike traditional scan engines, the AE2 Advantage vision engine delivers best-in-class 1-D and 2-D code reading, plus a full suite of industry-proven vision tools to locate, analyze and inspect parts or features for embedded vision applications. The AE2 Advantage vision engine is designed for deep integration into OEM products. The AE2 is also delivered with proven and easy to use application software from Cognex.
The In-Sight 5705 series offers high performance with high resolution making it the fastest 5MP self contained vision system in the world. The In-Sight 5705 color follows making it the only standalone 5 MP color vision system in the world! Both systems support Gigabit Ethernet and the new blazing fast PatMax® Redline tool. In-Sight 5705C: True 24-bit color processing True Color Filtering and easy-to-use Color ID and Color Extraction tools make color inspections easier than ever. Setting up and performing color inspections using these tools requires simple selection of a color region and then color training. Faster image filters on an In-Sight 5705 Full image speed is significantly higher with the In-Sight 5705 Series- seven times faster running the closed filter and the edge magnitude filter than a two megapixel system. In practical terms, it’s over half a second faster. This dramatic speed increase reduces cycle times or allows more time for running more detailed inspections.
Features Low insertion loss Wide wavelength range Low crosstalk High stability, high reliability Epoxy-free on optical path Latching and non-latching Application Metropolitan area network R&d in laboratory System monitoring Configurable oadm Parameters Osw-1×2 Wavelength range Nm 650~1310 1260~1670 Testing wavelength Nm 650/780/850/980/1064/1310 1310/1490/1550/1625/1650 Insertion loss Db Typ:0.6, max:1.0 Typ:0.5 , max:0.8 Return loss Db =30 =50 Crosstalk Db =35 =55 Pdl Db =0.05 Wdl Db =0.25 Tdl Db =0.25 Repeatability Db =±0.02 Power supply V 3.0 or 5.0 Lifetime Cycle =107 Switch time Ms =8 Transmission power Mw =500 Operation temperature ? 40~+85 Storage temperature ? 40~+85 Weight G 16 Dimension Mm (l)27×(w)12.6×(h)8.5(±0.2)
Features Low insertion loss Wide wavelength range Low crosstalk High stability, high reliability Epoxy-free on optical path Latching and non-latching Application Metropolitan area network R&d in laboratory System monitoring Configurable oadm Parameters Osw-d1x2 Wavelength rangeNm650~13101260~1670 Testing wavelengthNm650/780/850/980/1064/13101310/1490/1550/1625/1650 Insertion lossDbTyp:0.6, max:1.0Typ:0.5 , max:0.8 Return lossDb=35=50 CrosstalkDb=40 =50 PdlDb=0.05 WdlDb=0.25 TdlDb=0.25 RepeatabilityDb=±0.02 Power supplyV3.0 or 5.0 LifetimeCycle=107 Switch timeMs=8 Transmission powerMw=500 Operation temperature?-40~+85 Storage temperature?-40~+85 WeightG16 DimensionMm(l)27×(w)12.6×(h)8.5(±0.2)
Features Low insertion loss Wide wavelength range Low crosstalk High stability, high reliability Epoxy-free on optical path Latching and non-latching Application Metropolitan area network R&d in laboratory System monitoring Configurable oadm Parameters Osw-2x2 Fiber typeNm MmSm Testing wavelength Nm 630/650/780/850/980/1064/1310 1310/1490/1550/1625/1650 Insertion loss Db Typ:1.0, max:1.3 Typ:1.0 , max:1.2 Return loss Db =30 =50 Crosstalk Db =35=50 Wdl Db =0.25 Tdl Db =0.25 Repeatability Db =±0.02 Power supply V 3.0 or 5.0 Lifetime Cycle =107 Switch time Ms =8 Transmission power Mw =500 Operation temperature ? -40~+85 Storage temperature ? -40~+85 Weight G 16 Dimension Mm (l)28×(w)12.6×(h)8.5(±0.2)
Features Low insertion loss Wide wavelength range Low crosstalk High stability, high reliability Epoxy-free on optical path Latching and non-latching Application Metropolitan area network R&d in laboratory System monitoring Configurable oadm Parameters Osw-2x2b Wavelength range Nm 650~1310 1260~1670 Testing wavelength Nm 650/780/850/980/1064/1310 1310/1490/1550/1625/1650 Insertion loss Db Typ:0.6, max:1.0 Typ:0.5 , max:0.8 Return loss Db =30 =50 Crosstalk Db =35 =50 Pdl Db =0.05 Wdl Db =0.25 Tdl Db =0.25 Repeatability Db =±0.02 Power supply V 3.3 or 5.0 Lifetime Cycle =107 Switch time Ms =8 Transmission power Mw =500 Operation temperature ? -40~+85 Storage temperature ? -40~+85 Weight G 16 Dimension Mm (l)27×(w)12.6×(h)8.5(±0.2)
Features Low insertion loss Wide wavelength range Low crosstalk High stability, high reliability Epoxy-free on optical path Latching and non-latching Application Metropolitan area network R&d in laboratory System monitoring Configurable oadm Parameters Osw-d2x2b Wavelength range Nm 650~1310 1260~1670 Testing wavelength Nm 650/780/850/980/1064/1310 1310/1490/1550/1625/1650 Insertion loss Db Typ:0.6, max:1.0 Typ:0.5 , max:0.8 Return loss Db =30 =50 Crosstalk Db =35=50 Pdl Db =0.05 Wdl Db =0.25 Tdl Db =0.25 Repeatability Db =±0.02 Power supply V 3.0 or 5.0 Lifetime Cycle =107 Switch time Ms =8 Transmission power Mw =500 O i toperation temperature ? -40~+85 Storage temperature ? -40~+85 Weight G 16 Dimension Mm (l)27×(w)12.5×(h)8.2(±0.2)
JX9010 is an optical fiber fusion splicer with a brand new design. With powerful functions and super low splicing loss, it is highly competent for construction of trunk lines and FTTx. Lightweight and compact, it is easy to use even in confined space. The novel fiber imaging system makes the image clearer. The real-time embeded Operating System provides a friendly man-machine interface and abundant functions. According to clients needs.
Handheld OTDR is the newest instrument designed for testing FTTx network According to clients needs.
HR manufactures a wide variety of Prisms. Custom designs including right-angle, equilateral (dispersing), and cube Prisms, dove Prisms, roof Prisms, penta Prisms, and retroreflectors. These Prisms are available in a wide variety of materials, including glass, Germanium, Silicon, ZnSe , ZnS , Fused Silica, Quartz and calcium fluoride. Dimension 2mm to 500mm.
Superintelligent eye screener. With superpowerful AI. AI-Optic combines infrared photorefraction with the Deep Learning Algorithm of Artificial Intelligence. Taking eye scans to a whole new level. Maximum precision.200% more accurate.Artificial Intelligence makes AI-Optic the most accurate handheld autorefractor on the planet. Twice as precise when compared to other handheld vision screeners. Capable of measuring up to desktop devices. Minimum price.Pay 90% less AI completely redefines what an eye screener is and how it is manufactured, reducing production costs dramatically.
United Photonics Technology, Inc.-ISO9001 Company Mirror Mirror is a reflecting surface that forms an image of an object when light rays coming from that object fall upon it. Usually mirrors are made of plate glass, one side of which is coated with metal or some special preparation to serve as a reflecting surface. UPT offers dielectric coated mirrors and metal coated mirrors which are made of substrate such as Bk7, K9, Fused Silica, CaF2, Sapphire. Specifications: Material: BK7 Grade A Optical Glass or other material, Typical Diameter (�¦mm) 8.0, 10.0, 12.7, 15.0, 20.0, 25.4, 30.0, 50.8 Typical Thickness (mm) 2.0, 3.5, 5.0, 6.5 Diameter Tolerance (mm) +/-0.2 (General), +0.0/-0.02 (High Precision) Thickness Tolerance (mm) ±0.2 (General), ±0.05 (High Precision) Clear Aperture >80% (Small Size), >95% (Large Size) Parallelism 6 min. (General), 3 sec. (High Precision) Surface Quality 80/50 (General), 10/5 (High Precision) Flatness (per 25mm@633nm) (General), /10 (High Precision) Bevel (face width x 450)
Penta Prisms / Beamsplitter Penta Prism / Wedge / Right Angle Prisms / Corner Cube Retroreflectors / Anamorphic Prisms / Dove Prisms / Rhomboid Prisms / Reflection Prism / Dispersion Prisms Penta Prisms Penta prism can deviate an incident beam without inverting or reversing to 90.The deviation angle of 90 is independent of any rotation of the prism about an axis parallel to the line of intersection of the two reflecting faces. It is commonly used in Plumb Level, Surveying, Alignment, Range finding and Optical Tooling. The reflecting surfaces of this Prism must be coated with a metallic or dielectric coating. The standard Penta Prism reflecting surfaces are coated with aluminum or enhanced aluminum. Specifications: Material: BK7 Grade A Optical Glass Dimension (mm): 2.5x2.5 ~ 100x100 Dimension Tolerance (mm): +/-0.2 (General), +/-0.05 (High Precision) 90 Deviation Tolerance: 1 arc min.(General),3 arc sec.(High Precision) Angle Tolerance: 3 arc min. (General), 3 arc sec. (High Precision) Surface Quality 80/50 (General), 10/5 (High Precision) Flatness (per 25mm@633nm) (General),/8 (High Precision) Reflection: 90%@400-700nm Note: (1). Besides N-BK7 glass, other optical glass is available for custom-made Penta Prisms. (2). Penta Prism at bigger size is available. (3). Typical deviation tolerance is 1 minute, better precision such as 30 sec, 10 sec, 5 sec or 3 sec is available. (4). Typical reflection is >90% by Al coating, other metal coating such as Ag, Cu, or High Reflection Dielectric Coating is available. (5). Besides uncoating, Anti-Reflective(AR) coating is available upon request. United photonics Technology
Product Description The Auto Splicer functions as a central element for smooth, continuous operation, fast and helps to increase production output and saving production cost during the corrugated cardboard production process. Auto Corrugated Plant Automatic Splicer Function: 1. No paper tail connecting, reduce the loss of the base paper (the overlap of the base paper about 40mm width). 2. When the paper truck remove, automatically transferred out,vacuum-adsorbed, easy to operate, and fully automatictension control, paper-connecting zero error. 3. All adopt PLC automatic control. 4. When the buffer wheel pull for the first time, it's easy to pull and aligned automatically. 5. Collecting paper controlled by cylinder, will not cause the broken tile and blistering problem. Design speed: Model 300-280 m/min(Flute liner)250m/min(Top liner) Model 400-380 m/min(Flute liner)250m/min(Top liner) Paper Connection: overlap connecting Design width: the maximum paper width can reach 2550mm Weight of the original paper: 50g/m2~350g/m2 Paper reaction completion time: about 1 second Gas source: a minimum of 0.6MPa dry clean air source Power demand: power supply:380V, 50Hz, 20A control power:12V,24V Paper frame brake: pneumatic brake/ magnetic powder brake
Hanzhong Brisun Optics Co., Ltd. Is the high High precision optical element manufacturer provides customized production of Various optical lenses, including spherical lens, cylindrical lens, optical window, mirror, prism, filter, metal base mirror and other high-precision optical elements. The base materials include various optical glass, fused quartz, calcium fluoride (CaF2), zinc selenide (ZnSe), germanium (GE), silicon (SI), sapphire, metal and other materials. And provide antireflective film, high reflection film, spectroscopic film, metal film and other optical coatings. Prism is an optical element that turns the light according to the specific angle between the outgoing light and the incident light. In the optical path, the prism can change the angle between the outgoing light and the incident light (such as 90 �°, 180 �°, etc.), offset the light and change the image direction. Prisms are widely used in laser research, laser optical system, optical imaging, machine vision, life science, biomedicine and other fields or products. Borisun optics can provide various prisms in stock standards, such as K9 standard precision right angle prism, K9 high precision right angle prism, UV fused quartz standard precision right angle prism, UV fused quartz high precision right angle prism, K9 pentagonal prism, K9 Dawei prism, K9 ridge prism, K9 angle reflector (K9 pyramid prism), UV fused quartz angle reflector (UV fused quartz pyramid prism), wedge prism, etc. While providing various prism standards, we can also provide you with prism customization services according to your actual needs, such as the change of prism size, the improvement of parameter indicators, the change of coating requirements, etc. Welcome your inquiry and we will serve you wholeheartedly Technical parameters: Material: optical glass, H-K9L (N-BK7), quartz Radius of curvature: ± 1mm - ± 50000mm ± 1% Outer circle: 3mm-500mm ± 0.1mm Center thickness tolerance: ± 0.05mm (we can process to ± 0.01mm with high precision) Center deviation: 3²(we can process to 30 ³with high precision) Surface accuracy:/ 8 (high precision, we can process to 1 / 10�») Surface quality: 60/40 (we can process to 10-5 with high precision) Effective caliber: 90% Coating: according to the customer requirements In addition, we have thousands of kinds of stock, such as quartz plano convex lens, quartz plano concave lens, quartz biconvex lens, quartz biconvex lens, cylindrical lens, prism, filters, windows, beamsplitter and so on. The price is preferential and the quality is excellent, which can meet your demand for a small order. If you are interested it, welcome to inquiry us or search "Hanzhong Borisun Optics Co.,Ltd "to know about more details.
Equal to:jdsu mts-2000 fiber optic otdr Wavelength(nm):1310/1550nm Event blind zone (m):
Features: Top-grade quality View Tester in Far East Elegant design butterfly-shape appearance, High grade plated-film used in all optic lenses. This deivce is applicable to ophthalmology department of hospitals and spectacle store for precision measurement of visual functions such as myopia, hyperopia, astigmatism, eyesight balance, heterophoria, stereoscopic vision and eyesight amalgamation Specification: Sphere power range:+16.75D to 19.00D w/minimum reading 0.25D or 0.12D (when using +0.12D auxiliary lens or optional±0.12D lens) Cylinder power range:0 to -6.00D, w/minimum reading 0.25D or 0.12Dï¼?auxiliary lens) 0 to -8.00D(-2.00D auxiliary lens) Astigmatic axis scale: 0 to 180° in 5° steps Cross cylinder:±0.25D, reversal type (synchronized with astigmatic axis) Rotary prism:0 to 20 D in 1 D steps P.D. adjustment:48-80mm; step 1 Forehead rest adjustment:16mm Convergence:the optical axes of the lenses are aligned at a distance of 400mm from enable convergence=57mm to 80mm. Corneal distance:2mm forward and 5mm backward from standard plane with scale? Effective field of view:19mm Product size:291-323mm*315mm*85mm Package size:470mm*440mm*220mm N.W./G.W.: 5kgs / 6.5kgs
Eco pg & uv lens tester
