Tempered and Soaked Glass Security: It will not hurt people after breaking to pieces,the self-beak rate is lower than 0.1%. High intensity: It has 4 to 5 times strength than float glass Hot Stability: It has good hot stability, which can endure 3 times temperature than float glass, also can endure changing of above 200C. Thickness: 3-19mm Max specification: Flat tempered glass 3000*8000mm; Bent tempered glass 3000*5000mm R=1500mm. Packing: Sea worthy wooden cases with interlayer paper.
Tempered glass is made by heating flat glass to approach its softening temperature and suddenly chilling it with jets of cold air, which produces highly desirable conditions of induced which result in additional strength,resitance to thermal stress and impact resistance. Feature: 1. High intensity .tempered glass is 3-5 times stronger than ordinary annealed glass 2.Good safety function .In the event of breakage, tempered glass breaks into blunt particles causing practically no injury to the person 3. Withstand rapid temperature change .tempered glass can withstand a very wide range of rapid temperature change. Thickness:2-12mm Specification: Min:200x200mm Max:2440x3660mm Application: Construction, automobile, train, ship, furniture, automatic door escalator, microwave oven, refrigerator, shower etc. Standard wooden crates.
What is tempered glass? Tempered glass is float glass that has been heated and then cooled rapidly to increase its force or pressure on its surface, its physically strength is times of normal float glass. What is heat strengthened glass? Heat strengthened glass is a kind of glass between float glass and tempered glass, it has part advantages of tempered glass, such as high strength, meanwhile it avoids the weakness of tempered glass, such as flatness problem, spontaneous breakage and completely damage when broken. Why heat soak test is needed for tempered glass? Temperd glass is used in building industry as safety glass, but the weakness of spontaneous breakage affects its use. Heat soak test is a treantment to nickel-sulphide inclusions, which is the main cause of spontaneous breakage. Wooden crate Thickness: 5mm-25mm Min size: 300*300mm Max size: 3300*9500mm/2440*12000mm.
1,Thickness:3-19mm 2,Max:5000X3300mm Min:600*900mm 3,SGCC,CE,ISO 4,Edge:Flat,grind,polished 5,Holes available. Specification a)Max size:5000X3300mm b)Thickness from 3mm-19mm c)Color:clear,low-iron,F green,ocean blue,Fort blue,and other tinted glass. d)Edge:Flat edge,grind edge,fine polished edge,bevelled edge and others. e)Corner:natural corner,grind corner,round corner with fine polished. f)Holes:Drill work available at customer's option. Quality Standard toughened glass with SGCC,CE certificate,AS/NZS certificate,3C certificate and Fire-proof certificate. Applications Building glass,Curtain wall, Air conditioned Buildings,Hotel,Furniture, Showcase,Sightseeing elevator,Bus station,Subway station, bank, airport,etc. Crate with paper and powder interlayer
Tempered glass Thickness:3-19mm Max Size:3000*11000mm.
1). Tempered glass is high grade float glass which is processed by special methods. 2). Have a high impact strength and great intensity to improve 3). If broken, the particles and debris will not harm the human body is an ideal choice for safety glass. 4). Can be used in flat-type building and around the doors and windows, walls, screens and home decoration, shower room , and so on . Paper interlayer between two sheets, wooden crates with strong bottom plank and polythene wrapping on crates to avoid moisture.
Description: 1). Tempered glass 2). Shape: can be round or rectangular 3). Size: as your requirements 4). Can do some designs on it Paper interlayer between two sheets, wooden crates with strong bottom plank and polythene wrapping on crates to avoid moisture.
Products specification: Thickness:3-19mm Max specification: Flat tempered glass: 3000*8000mm min size: 300x300mm Bent tempered glass: 3000*5000mm r=1500mm(minimum) Crate
Thickness: 3-19mm Max. Size: 4500x2500mm Applications: 1.Indoor and outdoor wall glass printing 2.Shower room, stairs railing , elevator and furniture glass printing Wooden crate
Tempered glass: A, its advantages: 1). High mechanical strength 2). Safety 3). The tempered glass bears excellent thermal stability that can withstand 200-300¼temperature jump. B. Standard: gb/t9963-1998; jis r3206-1989; bs 6206a C. Specifications: available maximum dimension (3-19mm) Available minimum dimension (180* 250mm) Thickness (2400*8000mm ) D. Application: window, door and glass curtain wall, furniture, construction, automobile etc. Standard pack according to the specification.
1, Semi-tempered glass is ordinary about the strength of float glass 2 times. 2, Effectively resist heat stress and avoid the heat Zhalie glass. 3, Rupture, the semi-tempered glass debris tends to remain in the framework of not falling. 4, Not a glass of self phenomenon. Applications : 1, business and civil buildings 2, glass escalator railings and parapets 3, vehicles and ships, such as the windows 4, decoration and furniture 5, the existence of thermal shock Specifications++ thickness of the :3-19 mm Maximum size: 2440 X 6000mm Minimum size: 150 X250mm.
Flat toughened glass is produced by common glass which was cooled suddenly when heated to soft point, the producted compress and stress saner the two side then produce tenile stress make the whole stress balance. Maximum:2440mm*7500nn Niminum:200mm*300mm Thickness:4-19mm.
Safety glass used the door, window, building and table. Wooden packing.
In modern architecture becomes more popular the translucent constructions of the complex architectural forms. Cities look defines, in many aspects, the elegant systems of the high-rise building facades glass cover. Nowadays it is very difficult to find such building material as bent tempered glass, which would be so suitable for decision of the modern construction types. Tempered glass constitutes flat glass, subjected special thermal treatment tempering, in result of witch in glass volume arise naturally distributed internal tensions, witch enlarge mechanical glass strength and provide special (safe) character of its destruction. Increase of mechanical strength (while bend can reach 250 mpa that is five times higher than in usual flat glass) stipulates increase of glass thermal resistance in 3-4 times (since 40 till 180 0c). Flat glass has thermal resistance by 40 0c, tempered glass by 180 0c, that prevents tempered glass from destruction while overheating and temperature difference. It is very important while using in external glass cover by toned and reflex glasses with absorption factor of thermal energy more than 25 %, when glass can get hot till 90 0c. In europe, lately, is widely spread the use of tempered glass with the purpose of safety, longevity and reliability. Bent tempered glass almost does not differ from tempered flat glass, the difference becomes apparent only on the final stage of the process. Glass after heating section comes to tempering section, where in a short period of time flat glass bends by the forming rollers. The forming rollers are usually set according to the radii models and forms. USE: Structural flat glass cover of buildings façades Shops and supermarkets windows Partitions in apartments and offices Glass doors Saunas doors (tempered glass stands perfectly heat strokes) Stairs and parapet fences Roofs, roof visors Winter gardens building Electric and gas ovens doors Escalators side supporting planes. Our company can offer: Tempering of clear float glass, thickness: from 4 till 19 mm Tempering of toned on the whole glass Tempering of reflex (sun protective) glass.
The treatment process of tempered glass is as when heating glass close to molten point, to carry out even and rapid cooling treatment on the surface of glass, this enhancing the strength and thermal stability. The glass will break into cellular pieces when the external force exceeds its strength. It is hence a highly safety glass. Wooden crate.
Tempered glass:in modern architecture, the designer has increasingly high requirements on safety and strength of the glass that is why tempered glass is widely used.Shanghai tob produces tempered glass and use a special heat treatment for the ordinary annealed glass, which results in the uniform stress on the surface as well as the tension stress inside of the glass to increase strength. Characteristics: The strength of tempered glass is four times bigger than that of the ordinary annealed glass When destroyed by outside force, the tempered glass forms bean-like particles to reduce the danger for human body It withstands the sudden change of temperature.(for instance, 5mm tempered glass withstands a temperature change of 200℃) The half-tempered glass has a very sound flatness and less optical aberration The half-tempered glass can be further processed as colored tempered glass which is excellent for decoration purpose Applications: Auto motives, trains, ships, construction outer wall, partition for inner decoration, shower room Furniture, automatic door, elevator, fireplace, etc. Specifications: Thickness for ordinary glass: 3--19mm Max.Size: 2400*8000mm Min.Size: 24*24mm Inner packing:blistering paper Outer packing:fumigation wooden case
Tempered glass We can produce all variety of glass, deep processing, glass, as well as engineering design for the installation of an integrated chain of economic entities. A variety of large-scale processing equipment, on 3-25mm glass straight edge, the hypotenuse, round edges, and so on the side of special processing. There are varieties of steel operation, emulsification, coating, bending, plastic folder, hollow, hot, hot, die-casting, caizuan carved, relief, such as glass polycrystalline dozens of varieties.
(AG) anti-glare glass. Non-glare glass is used on the high quality picture frames, it can avoid interfere of ultraviolet radiation and strength the sight results to the picture. A benefit with this product is that when a person is looking at goods in a shop window, no annoying reflections will get in their way. The manufacturer claims that savings in energy costs can also be made because the product reduces the need for artificial lighting.
Tempered glass
Intex Glass (Xiamen) Co Ltd is a professional glass manufacturer in China with 15 years of experience. We produce tempered glass in 3mm to 19mm thickness for windows, doors, partition walls, shower doors, table tops etc. All of our glass products have found their end use as components in a wide variety of finished products manufactured by our customer base in North America, Europe and Asia. Flat tempered glass' specifications: Max: 2,600mm X 5,000mm Min: 100mm X 300mm Thickness: 3mm~19mm Bend tempered glass' specifications: Max: 2,400mm X 3,660mm Min: 600mm X 400mm Thinckess: 5mm~19mm Radius : 5~6mm radius í¦1,000mm 8~10mm radiusí¦1,500mm 12~19mm radiusí¦2,500mm Packing: Plywood Crates & End cap
