7kw KFXR-007SPCI Mini split domestic water heater heat pump with water tank 150L/200L/300L/400L/500L 1. Mitsubishi or Panasonic Rotary type compressor, low vibration, low noise and high reliability. 2. Polyurethane insulated water tank. 3. Intelligent EE valve, excellent efficiency at different ambient temperature. 4. Built-in famous water pump. 5. Innovative W-A-R( Water, Air, Refrigerant) technology, higher efficiency up to COP 4.5. 6. Energy saving up to 80% than traditional electric heater 7. Automatically defrosting.
Heavy Duty Moulded Plastic handle Chrome Plated Specification SIZE (Inch.) Inner Box(Qty.) Outer Box(Qty.) 12" 72 58
Strong Die Casted handle Supplied With 30MM Blade Specification SIZE (inch.) Inner Box(Qty.) Outer Box(Qty.) 12" 48 56
Solar Water Heater Pressure Temperature Valve (PT Valve) Model NO.: UP-PTValve Min order:100 pieces Accept Min order:Yes Supply Ability:1000000 pieces / Week Country of Origin:China Stock Time:20 Days Size: 3/4 Temperature Rating: 90 Degrees Celsius Pressure Rating: 8 Bars / 116 PSI Material: Brass Features The Pressure Temperature (TP) Valve is designed to protect the users and tank of the solar water heater. The PT relief valve controls the temperature and pressure of the system within safe parameters. Preventing hot water from being able to reach temperatures of over 90°C and pressure in excess of 8 Bars (116 PSI). On reaching these settings, the valve discharges a sufficient amount of water into the atmosphere so that the temperature and pressure return to within the systems safe operating limits.
ISESAR 1.3KG fireball Introduction Files 1. Light Weight: 1.3kg 2. Shape Ball-diameter 150mm 3. Methods of use: Fixed point automatic induction/input 4. Auto reaction time: 3 seconds 5. Extinguishing class: Effective on A,B,C,E,F fires; 6.Safe application: Safe, Environmental, Non-toxic, Harmless and No-Pollution. Packing Detailes Box= 1 piece (bracket+ screws included) Carton= 12 pieces (bracket+ screws included) Box dimension: 18cm*18cm*18cm Carton dimension: 56cm*38cm*38cm 20ft container= 4320 pieces= 360 cantons( bracket+ screws included) 40ft container= 9072 pieces=756 cantons( bracket+ screws included) MOQ:120pcs OEM MOQï¼?3000pcs
Model:DY58/1800-24 Capacity:200L Tr-element hitech Vacuum Tube : Material:High Boronsilicon 303 Glass Szie: Ã?58mm*1.8mm QTY:24pcs Improve solar energy absorptivoty more than 24% than general tube,double layer glass tube between two layer vacuate (vacuum degree more than 1.33Ã?10-3Pa) packaged .Adopt PEPAC Multi target interference film technique add purple paint at the basic technology of megnetron sputtering technology deposits more layer gradual changed selective suction membrane on inner and ouer tube wall.Solar energy absorptivity more than 97%.Thermal emissivity lower 6%. Air Stuffy temperature up to 280â??,good heat-insulating property.ï¼?40â?? also use in winter.Bear diameter 2.5mm hail attack. Water Tank :Inner Tank +Insulation Layer+Outer Tank Inner Tank: material:SUS304-2B Food Grade Stainless Steel Szie:Ã?360*1860mm , Thickness:1.2mm , Hole Distance 750mm Permanent insulation, 304 stainless steel inculde Chromium,forms Chromium oxidation protective film to protect tank body in surface,Show Matt,No rust Insulation Layer: Material:Polyurethane Foam ,Thickness 5.5-6.0cm , high temperature and high pressure Using electronic measurementand integral foaming technology,Primary molding,Super insulation,Keep warm time over 72hours,with thickened foaming layer. Outer Tank: Material:304/202 Stainlees Steel Size:Ã?460*1950mm, Thickness:0.31mm , Hole Distance 750mm,Rivet free inner buckle head cap Bracket : Material: Al-alloy Size:1940mm, Thickness15mm Angle:45degree, easy install/dismantle,Free offer stailess steel 202 nuts and screw Packing Details as following: Vacuum Tune (58mm*1.8m): 8pcs/CTN,Size:1870*270*165;10pcs/CTN Size:1870*330*165mm 12pcs/CTN,Size:1870*270*240mm ;15pcs/CTN,1870*330*240mm 40'HQ:6640-7290 pcs; 20'GP:2600pcs Water Tank Packing Szie:480*480*1970mm Bracket Packing Size:320*110*2000mm Remark 1. MOQ: 100set, With Certificated :CE,RoHS ,Energy consumption label. 2. Payment Term: 1). T/T, 30% deposit, Pay balance after see copy B/L. 2).West Union Pay 3). L/C 3. Leadtime: 10-15days 4. Lifetime: Vaccum Tube : 15years, Water Tank:15years, Bracket:15years 5. Price Will Be Reduce 10% If Choose Outer Tank Material :Color Steel Plate; Bracket Material: Galvanized Steel
Model:DY58/1800-36 Capacity:300L Tr-element hitech Vacuum Tube : Material:High Boronsilicon 303 Glass Szie: Ã?58mm*1.8mm QTY:36pcs Improve solar energy absorptivoty more than 24% than general tube,double layer glass tube between two layer vacuate (vacuum degree more than 1.33Ã?10-3Pa) packaged .Adopt PEPAC Multi target interference film technique add purple paint at the basic technology of megnetron sputtering technology deposits more layer gradual changed selective suction membrane on inner and ouer tube wall.Solar energy absorptivity more than 97%.Thermal emissivity lower 6%. Air Stuffy temperature up to 280â??,good heat-insulating property.ï¼?40â?? also use in winter.Bear diameter 2.5mm hail attack. Water Tank :Inner Tank +Insulation Layer+Outer Tank Inner Tank: material:SUS304-2B Food Grade Stainless Steel Szie:Ã?360*2760mm , Thickness:1.2mm , Hole Distance 750mm Permanent insulation, 304 stainless steel inculde Chromium,forms Chromium oxidation protective film to protect tank body in surface,Show Matt,No rust Insulation Layer: Material:Polyurethane Foam ,Thickness 5.5-6.0cm , high temperature and high pressure Using electronic measurementand integral foaming technology,Primary molding,Super insulation,Keep warm time over 72hours,with thickened foaming layer. Outer Tank: Material:304/202 Stainlees Steel Size:Ã?460*2850mm, Thickness:0.31mm , Hole Distance 750mm,Rivet free inner buckle head cap Bracket : Material: Al-alloy, Size:2900mm, Thickness15mm, Angle:45degree, easy install/dismantle,Free offer stailess steel 202 nuts and screw Packing Details as following: Vacuum Tune (58mm*1.8m): 8pcs/CTN,Size:1870*270*165;10pcs/CTN Size:1870*330*165mm 12pcs/CTN,Size:1870*270*240mm ;15pcs/CTN,1870*330*240mm 40'HQ:6640-7290 pcs; 20'GP:2600pcs Water Tank Packing Szie:480*480*2870mm Bracket Packing Size:320*110*2920mm Remark 1. MOQ: 100set, With Certificated :CE,RoHS ,Energy consumption label. 2. Payment Term: 1). T/T, 30% deposit, Pay balance after see copy B/L. 2).West Union Pay 3). L/C 3. Leadtime: 10-15days 4. Lifetime: Vaccum Tube : 15years, Water Tank:15years, Bracket:15years 5. Price Will Be Reduce 10% If Choose Outer Tank Material :Color Steel Plate; Bracket Material: Galvanized Steel
1. OVER/UNDER SINK UNVENTED TYPE, 2. SPCC STEEL TANK, 10 BAR PRESSURE TESTED AND EXCLUSIVE VITREOUS ENAMEL COATING, 3. HIGHLY EFFICIENT THERMAL INSULATION AND FIRM ABS HOUSING, 4. ANTI-PROOF, ANTI-CORROSION DESIGN, 5. KNOB REGULATION THERMOSTAT, 6. 8 BAR SAFETY VALVE WITH 1/2 COPPER OUTLET, 7. SPACE SAVING WALL FIXING, 8. SIMPLE INSTALLATION, 9. INDICATOR LIGHT, ,
1. Over/under sink unvented type 2. Spcc steel tank, 10 bar pressure tested and exclusive vitreous enamel coating 3. Highly efficient thermal insulation and firm abs housing 4. Anti-proof, anti-corrosion design 5. Knob regulation thermostat 6. 8 bar safety valve with 1/2 copper outlet 7. Space saving wall fixing 8. Simple installation 9. Indicator light
Our Solar water heating systems are the best performing designed to meet the residential and commercial purpose. Kamati has gained the trust and is growing as the leading solar water heater manufacturing company. Specification Special Stainless Steel-304/316 PUF Insulation High Efficiency 5 Year Warranty Suitable for Hard water Also available PFC Pressurized and Non Pressurized models.
Description: OEM Flat panel solar water heater Color: Custom made Size: 2mx1m Material of out tank: 0.31mm thickness color steel/ fluorine carbon steel Material of inner tank: Food grade 1.2 mm thickness SUS304 stainless steel Tank insulating layer: 50mm thickness, 45kg/m3 high-density polyurethane foamed Inlet and outlet hole: Female G 3/4 Max pressure: 0.6Mpa Flat panel solar bcollector Dimension: 2000x1000x80mm Absorber material: Selective balck chorme/Blue coating Head pipe: Copper/Φ22x0.6 Branch pipe: Copper/Φ10x0.5 Quantity of Branch pipe: 7PCS Welding: Laser welding Cover: Low iron tempered textured glass Frame: Anodised aluminium alloy Insulation material: Rock wall Bracket: 1.5mm thickness of galvanized steel material,25degree. Structure of tank: 8 holes for PT valve,water inlet and outlet,electric heater,Mag Rod , Temp.Sensor.Heat exchange inlet and outlet Welding: Argon arc welding Fastening pieces: Made of stainless steel screw Absorber area: 2m2 Temperature tolerance: from -5C to 250C Tank capacity: 150L Quality features, certificates 1.High level of efficiency due to Sunselect coating on the absorber. 2.Low energy loss thanks to excellent thermal insulation. 3.Suitable for on?roof and flat?roof assembly Installation: vertical, side by side. 4.Robust aluminium frame for maximum durability. 5.Highly reliable with long useful life due to the use of high quality, corrosion?resistant materials. Glass covering made from 6.low iron solar glass.
Model: IRA-HP58/1.8-OEM12 Color: Custom made Material of out tank: 0.31mm thickness color steel/ fluorine carbon steel Material of inner tank: Food grade 1.0 mm thickness SUS304 stainless steel Tank insulating layer: 50mm thickness, 45kg/m3 high-density polyurethane foamed Inlet and outlet hole: Female G 3/4 Max pressure: 0.9Mpa Solar collector tube: 3.3 Borosilicate glass with Al-SS/Cu coating 58x1,800mm with heat pipe Thickness of glass tube: 1.6mm Vacuum tube tightness: P0.005 Pa Absorption: as=0.93-0.96(AM1.5) Emission ratio: µh=0.04-0.06(80C±5C) Idle sunning property parameters: Y=220~260m2.C/KW Average heat loss coefficient: ULT=0.6~0.7W/(m2.C) Bracket: 1.0mm thickness of galvanized steel material Structure of tank: 4 holes for PT valve,water inlet and outlet,Mag Rod Welding: Argon arc welding Fastening pieces: Made of stainless steel screw Absorber area: 1.124m2 Heat pipe size: Dia14mm x 70mm length condenser,170cm length in total Heat pipe material: TU1 copper Heat pipe power: >120W/pcs Temperature tolerance: from -35C to 250C Tube quantity: 12 tubes Other Tube quantity: 8/10/12/15/18/20/24/30/36 tubes Tank capacity: 150L Other Tank capacity: 80/100/120/150/180/200/240/300/360L Heat pipe pressurized solar water heater features: 1.Adopts the best conduction performance metal- heat pipe (copper). 2.Can be used all year round in the cold climate. 3.High efficiency, rapid warming. Heat pipe in vacuum tube could transfer hot energy to cold water in pressurized solar water heater tank rapidly. 4.The whole pressure of the system is up to 1.5kg/M2, the inlet could connect the tap water directly, the max pressure can be 0.6Mpa. 5.No water in the tube, one tube broken don't influence the system working. 6.The design for inner tank is reasonable and scientific, which could hold 100, 000 times fatigue test without any damage. 7.Dual-purpose brackets for both flat and inclined roof. 8.The system is pressurized, it keep a constant temperature of water in the tank, avoid the problem came from water level controller malfunction which could cause water flow out. Pressurized solar water heater working principle: 1.The pressurized solar water heater tank has no exhaust hole, therefore, it must bear the pressure came from tap water. The hot water comes out because of water pressure. 2.Vacuum tube absorbs solar energy, and conductive copper pipe transfers the heat into the pressurized solar water heater tank. In this case, the water inside the tank becomes hot. 3.No water in the heat pipe makes the whole system could bear pressure.
Model: IRA-HP58/1.8-20 Material of out tank: 0.31mm thickness color steel/ fluorine carbon steel Material of inner tank: Food grade 1.0 mm thickness SUS304 stainless steel Tank insulating layer: 50mm thickness, 45kg/m3 high-density polyurethane foamed Inlet and outlet hole: Female G 3/4 Max pressure: 0.9Mpa Solar collector tube: 3.3 Borosilicate glass with Al-SS/Cu coating 58x1,800mm with heat pipe Thickness of glass tube: 1.6mm Vacuum tube tightness: P0.005 Pa Absorption: as=0.93-0.96(AM1.5) Emission ratio: µh=0.04-0.06(80C±5C) Idle sunning property parameters: Y=220~260m2.C/KW Average heat loss coefficient: ULT=0.6~0.7W/(m2.C) Bracket: 1.2mm thickness of galvanized steel material Structure of tank: 6 holes for PT valve,water inlet and outlet,Mag Rod Welding: Argon arc welding Fastening pieces: Made of stainless steel screw Absorber area: 1.874m2 Heat pipe size: Dia14mm x 70mm length condenser,170cm length in total Heat pipe material: TU1 copper Heat pipe power: >120W/pcs Temperature tolerance: from -35C to 250C Tube quantity: 20 tubes Other Tube quantity: 8/10/12/15/18/20/24/30/36 tubes Tank capacity: 200L Other Tank capacity: 80/100/120/150/180/200/240/300/360L
Model: IRA-HP58/1.8-24 Material of out tank: 0.31mm thickness color steel/ fluorine carbon steel Material of inner tank:Food grade 1.2 mm thickness SUS304 stainless steel Tank insulating layer: 50mm thickness, 45kg/m3 high-density polyurethane foamed Inlet and outlet hole: Female G 3/4 Max pressure: 0.9Mpa Solar collector tube: 3.3 Borosilicate glass with Al-SS/Cu coating 58x1,800mm with heat pipe Thickness of glass tube: 1.6mm Vacuum tube tightness: Pâ?¤0.005 Pa Absorption: as=0.93-0.96(AM1.5) Emission ratio: εh=0.04-0.06(80C±5C) Idle sunning property parameters: Y=220~260m2.C/KW Average heat loss coefficient: ULT=0.6~0.7W/(m2.C) Bracket: 1.5mm thickness of galvanized steel material,45degree. Structure of tank: 6 holes for PT valve,water inlet and outlet,electric heater,Mag Rod , Temp.Sensor. Welding: Argon arc welding Fastening pieces: Made of stainless steel screw Absorber area: 2.249m2 Heat pipe size: Dia14mm x 70mm length condenser,170cm length in total Heat pipe material: TU1 copper Heat pipe power: >120W/pcs Temperature tolerance: from -35C to 250C Tube quantity: 24 tubes Other Tube quantity: 8/10/12/15/18/20/24/30/36 tubes Tank capacity: 240L Other Tank capacity: 80/100/120/150/180/200/240/300/360L
Dear Managerï¼? This is MOTU Industry Co., Ltd from China. We specialized in gas water heater for 10 years, with customers of Walmart (Mexico) ect, and hope to find a way to cooperated with you. Our gas water heater have CE and Australian Standards AS2658 certification. Our new design Portable Gas Hot Water System is HOT SALE in Australia and New Zealands camping gear stores last yearï¼?This model have been hot sole in Target (USA ) too. As it is a promising product, we would like to introduce this opportunity to you. Samples available, can be sent on request.
Model: IRA-HP58/1.8-12 Material of out tank: 0.31mm thickness color steel/ fluorine carbon steel Material of inner tank: Food grade 1.0 mm thickness SUS304 stainless steel Tank insulating layer: 50mm thickness, 45kg/m3 high-density polyurethane foamed Inlet and outlet hole: Female G 3/4 Max pressure: 0.9Mpa Solar collector tube: 3.3 Borosilicate glass with Al-SS/Cu coating 58x1,800mm with heat pipe Thickness of glass tube: 1.6mm Vacuum tube tightness: Pâ?¤0.005 Pa Absorption: as=0.93-0.96(AM1.5) Emission ratio: εh=0.04-0.06(80C±5C) Idle sunning property parameters: Y=220~260m2.C/KW Average heat loss coefficient: ULT=0.6~0.7W/(m2.C) Bracket: 1.2mm thickness of galvanized steel material Structure of tank: 6 holes for PT valve,water inlet and outlet,Mag Rod Welding: Argon arc welding Fastening pieces: Made of stainless steel screw Absorber area: 1.874m2 Heat pipe size: Dia14mm x 70mm length condenser,170cm length in total Heat pipe material: TU1 copper Heat pipe power: >120W/pcs Temperature tolerance: from -35C to 250C Tube quantity: 20 tubes Other Tube quantity: 8/10/12/15/18/20/24/30/36 tubes Tank capacity: 200L Other Tank capacity: 80/100/120/150/180/200/240/300/360L
Description: Flat panel solar water heater(IRA-FP-1) Material of out tank: 0.31mm thickness color steel/ fluorine carbon steel Material of inner tank: Food grade 1.2 mm thickness SUS304 stainless steel Tank insulating layer: 50mm thickness, 45kg/m³ high-density polyurethane foamed Inlet and outlet hole: Female G 3/4 Max pressure: 0.6Mpa Flat panel solar collector Dimension: 2000x1000x80mm Absorber material: Selective balck chorme/Blue coating Head pipe: Copper/Φ22x0.6 Branch pipe: Copper/Φ10x0.5 Quantity of Branch pipe: 7PCS Welding: Laser welding Cover: Low iron tempered textured glass Frame: Anodised aluminium alloy Insulation material: Rock wall Bracket: 1.5mm thickness of galvanized steel material,25degree. Structure of tank: 8 holes for PT valve,water inlet and outlet,electric heater,Mag Rod , Temp.Sensor.Heat exchange inlet and outlet Welding: Argon arc welding Fastening pieces: Made of stainless steel screw Absorber area: 2m² Temperature tolerance: from -5C to 250C Tank capacity: 150L Quality features, certificates: High level of efficiency due to Sunselect coating on the absorber. Low energy loss thanks to excellent thermal insulation. Suitable for onâ??roof and flatâ??roof assembly Installation: vertical, side by side. Robust aluminium frame for maximum durability. Highly reliable with long useful life due to the use of high quality, corrosionâ??resistant materials. Glass covering made from low iron solar glass. Easy to erect and install.
Heat pipe pressurized solar water heater features 1.Adopts the best conduction performance metal- heat pipe (copper). 2.Can be used all year round in the cold climate. 3.High efficiency, rapid warming. Heat pipe in vacuum tube could transfer hot energy to cold water in pressurized solar water heater tank rapidly. 4.The whole pressure of the system is up to 1.5kg/M2, the inlet could connect the tap water directly, the max pressure can be 0.6Mpa. 5.No water in the tube, one tube broken don't influence the system working. 6.The design for inner tank is reasonable and scientific, which could hold 100, 000 times fatigue test without any damage. 7.Dual-purpose brackets for both flat and inclined roof. 8.The system is pressurized, it keep a constant temperature of water in the tank, avoid the problem came from water level controller malfunction which could cause water flow out. Pressurized solar water heater working principle 1.The pressurized solar water heater tank has no exhaust hole, therefore, it must bear the pressure came from tap water. The hot water comes out because of water pressure. 2.Vacuum tube absorbs solar energy, and conductive copper pipe transfers the heat into the pressurized solar water heater tank. In this case, the water inside the tank becomes hot. 3.No water in the heat pipe makes the whole system could bear pressure.
Our solar vacuum tubes has prosperity of high absorption and low emission. The vacuum tube consists of outer tube, inner tube, (al-n-ss-cu) coating and holder.Al-nn-ss-cu is coating for three target tube. Three target assimilate the advanced 12 layers of spattering deposition of trivalent element technology, high borosilicate glass, and gradual change of al-n-ss-cu selective complex absorptive coating. These make three target vacuum tube have high performance of absorption and low reflection ratio. Because of the coating, three target vacuum tube’s absorption rate increase 30%-50% than normal tube.
Inner tank: stainless steel SUS304/316L, thickness:1.0mm-1.2mm Outer tank: painted steel-0.4mm/aluminum-zinc coated steel-0.45mm/stainless steel SUS201/stainless steel SUS 304 Vacuum tube: QB-AL-N/AL-47-1500/58-1800 Insulation: 50mm-60 polyurethane Frame: coated galvanized steel-1.5mm/stainless steel SUS430-1.5mm/2.0mm aluminum alloy Accessories: intelligent controller, electric heater, magnesium bar, PT valve, negative valve etc. Characters: 1) Easy Maintenance No glycol, simple structure. No annual and periodical check-ups or maintenance is necessary. Blind sleeve design, no pollution, no-leaking heat pipe, easy installation. No water in vacuum tubes, one broken tube will not affect the function of the whole system. 2) High Performance With the cutting-edge vacuum-tube collecting technology, over 92% of sunshine energy is converted to thermal energy for heating and no circulation loss. Thicker insulation layer, functioning well in winter, even in minus-30-degree environment. 3) High Reliability System is simply working with the city net water, without pumps. Inner tank made by stainless steel SUS316-1.2mm. Working with high pressure, directly connected to running water, automatically functioning. With T/P valve and exhaust valve, it protects the tank from shrinking. 4)Year-round Operation With the freezing-proof technology, the system is designed and installed to operate for all seasons. Electric heater is optional to use, to ensure plenty hot water in rainy days. Principle: When vacuum tube absorb solar energy and heat the heat pipe ,the working fluid vaporizes and rise to the top of the heat pipe condenser, when heat pipe condenser meet cold water and cool down, the working fluid will fluidity and return to the bottom of the heat pipe, so once and once again to repeat this process.
