Pipe marking line is extruded by smaller single screw extruder through the composited extrusion die. Vacuum calibration water tank: it is equipped with two-stage vacuum system(for large diameter)advanced water recycle & high pressure cooling system, vacuum degree adjustment device and accurate water level & water temperature automatical control system. The accurate stannum bronze calibratation sleeve ensures fast cooling speed and molding of pipe. Its material is stainless steel. Spray cooling water tank: Long cooling unit ensures high efficiency cooling, Unique pipeline design shorten cooling length, its material is stainless steel. Haul-off unit: special integral transmission unit avoids asynchrony of individual transmission, Various control method ensures more flexible & accurate orientation, Accurate pressure regulating system makes hauling power adjustable. It has unique structure & flexible operation, its speed can be adjusted by motor inverter. Cutting unit: Full-hydraulic design of cutting unit ensures flexible pressure in state of cutting pipes, Flexible adjust for saw position & cutting depth, Unique power input system ensures high reliability of planetary unit, With ultra silent & enforced sucking system, Unique non-scrap cutting unit enusre clean cutting section for 16mm to 315mm pipe. Control system: Adopts the one of the most advanced plastic extrusion machinery control systems----PLC. It can ensure much higher quality extrusion, PLC system ensures high speed and convenient internet function that much more accurate and flexible control, intelligentized control order make the operation more simple. Packing in film or according to your needs.
Plastic granulator is an equipment to make film material, silk material or particles into plastic particles by extruding, cooling and pelletizing. Characteristics: this equipment is matched with crushing machine and granule cutting machine. Simply processes, advanced technology, and applied to different waste plastic materials. It is adopted the electric network, automatic temperature control and the energy-saving heater of state-grade patent with low power consumption, no-polluting, high degree of automation. Wooden box.
Use and characteristic: This unit is in the digestion absorption overseas vanguard technology foundation, develops the successful new product, For continuous production craft, This unit has the structure to be compact, the ease of operation, the output are big, automaticity higher merit It is produces the plastic strap material essential equipment. This unit mainly by the extruding machine, the nose, the cooling trough, a hauling, the hot drying oven, two hauling, flask, three hauling, curl installment and electricity control system constitutions and so on embosses the installment, to decide, mainly uses in PP hitting bandage's production. Wooden box.
PVC fiber reinforced hose extrusion line PVC fiber strengthen hose also be called as PVC network , commonly called as plastic flexible metal conduit , the wall of PVC Braided Fibre Reinforced Hose is three layers, outer and inner layer are soft PVC hose, middle layer is terylene fiber network, which has good chemical and physical property. They suitable for pigeonholing or having corrosives Gas, the liquid one transport, extensively for machinery it apply to, colliery, petroleum, chemical industry , agriculture irritating , building , field such as being civil (solar water heater , gas bottle ). This line is equipped with two sets of single screw extruder special design for soft PVC, cross-die and high speed fiber winding unit, the machine runs steady, fast and easy to operate.
PP sheet machine.
WPC profiles is a new building decoration materials, from PVC, PP, PE, PS, ABS plastic, and mixing all kinds of plant fiber, is made out of vacuum sizing for drilling. Planing, nailing, sawing, laminating, printing and other wood construction methods; for environmental protection, waterproof, moisture, corrosion, mildew, deformation, and good flame retardant and recyclable. Widely used on the floor, rails, trays, boxes, wall panels, doors and windows sets, baseboard and other fields.
XH-401 two roll mill is mainly used to uniformly mix the raw material and additinal agents for testing and apply the experiment resoults and its ratio in the production line to satisfy the requirement of quality and color specified by the customer. • Built-in heater,together with LCD temperature controller and high-precision sensor,can automatically compensate the temperature to guarantee the temperature equalization. • Telfon stop block. • Taiwang gear motor,together with high-precision gearing chain,guarantees stable operation,low noise and good durability. • Emergent reverse guarantees the safety. • Alternative configuration:oil heating and cooling system,AC frequency control system,independent limitless speed change,automatic roller-gap adjustment ande man-machine interface. • Relyng on the principle of customer-based, the company can customize the product according to the customer's requirements. 450KG 1000*550*1200.
Xh-406 press machine is applicable to r & d in laboraty.Put the raw materials into the mold between the electric boards and set up certain pressure and temperature.The raw materials are formed into test specimen for test use.This machine features compact size, cmplete functions, stable temperature, low noise, easy opention and material saving. • High-performance oil hydraulic system with automatic pressure compensation function can preset the time and pressure between two pressurizations and automatically conduct pressurization and depressurization supplemented with high-precision cylinder. •high-precision and abration-resistance guide pillar features strong loading force and stable lifting. •imported kdb electric board features high-temperature resistance, abrasion resistance, fast thermal transmision and strength against deformation. •high-precison temperature sensor, together with led temperature controller, built-in dense-point heating wire and tubular condenser, has the temperature range from normal temperature to 300°c. •single heating can be designed according to the requirements. •oil hydraulic system:the pressure range:20 ton, the maximum stroke of the cylinder:140mm. Technical parameter Capacity: 10-50 ton or designated Area of electric board: 300mm x 300mm or designated Area of colling plate: 300mm x 300mmor designated Plate spacing: 0-90mm or designated Timepiece: led 0-99(min) Temperature controll: normal temperature-300°c Temperature precision: ±4.5°c Colling mode: compressor water colling or running water colling Outside dimention: 1000 x 600 x 1500mm(w x d x h): Power supply: 3ø, ac380v, 20a Weight: about 460kg. 460kg, 1000 x 600 x 1500mm(w x d x h).
1. Adopting Taiwan original JiangSheng motors. 2. Low noise and can guarantee the cleaning of the crushing material. 3. Easy to operate and clean which can reduce the loss and protect the environment. 4. The material is well-distributed after smashing. 5. The system has overload protection and interlock protect switch, ensuring the safety in producing. 6. Special design in blade to ensure all the materials can be crushed. 7. The product is suitable for the crushings in sheets, tube, section, plate and packing materials area. 8. The current mesh size is 3-12mm and we can make it based on customers¡¯ specific needs. 9. Adopting imported alloy tools, which can ensure the service life. 10. Equipped with mobile material box, easy for recycling. Crushing chamber mm: 410¡Á 235 Crushing ability kg/ h: 200-250 Stationary cutter: 2 Rotary cutter : 12 POWER KW : 7.5 HP : 10 Dimensions LxWxHcm : 103¡Á 84¡Á 139. Weight KG : 500.
1. Using PID to control temperature, and the error is no more than 1 2. Hot-air dryer have thermocouple section accidentally alarm, high temperature alarm, overload protection and so many other kinds of safety protection. 3. Double digital displayer which can directly show the setting temperature and actual temperature. 4. Automatically delaying in turn on the electrotherma and shutdown of fan upon starting up and turning off 5. Lightly touching to controlling, one key press to starting up. 6. Hot-air drying machine also take environment protecting as a key point, our equipment reduce pressure loss to prevent air pollution and protect the surrounding environment. Capacitykg : 12 Heation kg : 1.8 Blowerw : 50 Dimensions cm : 64¡Á 44¡Á 76 Base diza cm : 11¡Á 11¡Á 4 22. NetWeight kg : 22.
This is PVC ceiling extrusion line, It can be used to produce PVC ceiling, PVC profile, PVC wall panel. Wood pallet.
This is PVC window profile line, it is used to produce PVC window and door profile. Packed by wood pallet.
Width of PVC roof tile: max 1250mm Thickness of PVC roof tile: 1.5-4mm. Packed by wood pallet.
This machine is mostly used to produce soft urethane foam rubber products(density is about 10-65kg/m3). It adopts high autoimmunizations level, flexibly controlling man-machine interface control system, users can store 16kindgs of different formulations, it is desirable fixing to produce foam rubber in furniture, shoes, circumference, electron, clothing industry and automobile industry. 1. Big material auto measure(weight auto set) 2. Material temperature auto control 3. The surface of mixing shaft, mixing barrel 4. Transducer and PLC auto control 5. Small tank(add the material by hand).
EPS compacted up to a 50:1 ratio Saving: Save cost and space by compressing your EPS reducing waste hauling; Benefit: We PURCHASE BACK all your compacted EPS; Environment Responsibility: Earn public relations points as a green business; Ease of Use: Simple, Safe, One-person operation; Safe: Cold compression with no fumes and minimal electrical requirements. Technical Data: ITEM C200 Total Power Consumption 17.05 KW / 22.86 HP Dimensions 5425¡Á750¡Á2100 (l/w/h) mm 214¡Á30¡Á83 (l/w/h) in. Shipping Dimensions Main part: 3600¡Á1000¡Á2400 (l/w/h) mm 142¡Á39¡Á94 (l/w/h) in. Output chute: 2200¡Á600¡Á800 (l/w/h) mm 87¡Á24¡Á31 (l/w/h) in. Weight 2,000 kg / 4,400 lbs Feed Hopper Door 1000¡Á645¡Á1710 (l/w/h) mm / 39¡Á25¡Á67 (l/w/h) in. EPS Block Dimensions 380¡Á380 (w/h) mm / 15¡Á15 (w/h) in. Applicable Material EPS (Styrofoam/expanded polystyrene) Production Capacity 200 kg per hour / 440 lbs per hour EPS Compression Ratio 50:1 Compressed EPS Density 200-400 kg/m3 / 570-1140 lbs/cubic yard.
1 the screw and cylinder are nitrogenation treated and precise processed. So it is hard, wearable and anti-cauterization. 2 the whole set adopts perch brake driving. So the rewinding is very smooth. 3 the electric part adopts brake driving. So it can help to save power 30%. 4 the noise is low, no dust, environmental and power saving. Installing dimensions:23000¡á1300¡á1500 mm Weight:3000kg.
1 The screw and cylinder are nitrogenation treated and precise processed. So it is hard, wearable and anti-cauterization. 2 The whole set adopts perch brake driving. So the rewinding is very smooth. 3 The electric part adopts brake driving. So it can help to save power 30%. 4 The noise is low, no dust, environmental and power saving. Installing Dimensions (mm) 18700¡Á3500¡Á3700
Stretch film machine Film width:500-1000mm Layer:1-3 layers.
Recycle HDPE,LDPE,PP. Output 60-200kgs/hour.
Blown film extrusion(blown film plant,film blowing machine) Film width:600-2000mm Film thickness:0.01-0.1mm.
