Function
Mixing is one of the important parts in rubber product processing. So far, the most common technologies have been used are open mill mixing and internal mixer mixing, which are called non-continuous mixing. , We have designed the "screw mixing machine" in continuous leveling method and of high efficiency with the strong points as follow:
It is efficient as it works long;
It does not result in power wasting as there is no idle-running;
It does not result in any working environmental impacts as the the transaction in the sealed main body of the machine;
It reduces the cost and increase the profit in operation as less power and fewer workers are required compared to those for open mill or for internal mixer.
It takes low labor intensity as there is only one worker needed in material feeding on the conveyor and qualified product is processed automatically.
It is a new type of mixing machine which is highly recommended in rubber product processing.
Product Description
It is used for beer waste, white wine grains and other high-humidity slag pressure filtration dehydration, strong dehydration, low power consumption, long service life, dehydrator manufacturer price is affordable, is the main equipment to achieve dehydration of winery waste.
Principle
The material passes through the conveyor, transported to the hopper of the dewatering machine, and evenly laid on the filter belt through the auger. The filter belt is leveled by the height of the material layer with the operation of the equipment so that the thickness of the material is completely uniform. Then, the upper and lower two ring-shaped filter belts are completely clamped, and the material layer is clamped by the driving roller, and the pair of rollers in the dewatering zone is mechanically pressed for several times to press out a large amount of water. According to the characteristics of the material, the extrusion force is automatically adjusted to meet the customer's requirements for material moisture.
We can produce FDA grade silicone gasket, the surface will be clean and translucent.
The surface with etched or smooth that we can produced.
We also can provided the FDA Certification, if you need, please let me know.
If you have requirement on this kind of products, please feel free to contact me. I will glad to offer to you.
I'm waiting here for your inquiry.
1204 Rubber Machinery Suppliers
Short on time? Let Rubber Machinery sellers contact you.
New product lab banbury mixer
Dispersion kneader is used for rubber&plastic raw material mixing and dispersion, just like the pvc eva nbr sbr etc.The specific proposal would be based on the materials characteristic, production capacity.
Specifications for dispersion kneader
Type
Unit
Ln-1 to ln-10
Capacity
Liter
1-10
Driving motor
Kw
2.2-15
Flip device
Hydraulic flipping
Flip angle
°
110
Air compressor
Kw
2.2
Water cooling
Mpa
0.2-0.4
Electric heating
W
650-1800
Size
Mm
About 1900*1000*2000
Weight
Kg
800-2300
Main features
1) fit for various of high filled composites.
2) effective leak proof device.
3) m-w type pressurization for even dispersion.
4) accurate control system(temperature system ;electric system).
Construction:
Tube:oil resistant synthetic rubber.
Reinforcement:four high tensile steel wire spiral layers (4 w/s).
Cover:â abrasion and weather resistant synthetic rubber.
Temperature range40c to +121 c.
Applications:
Ideally suited for high-impulse applications. No skiving required with w-series fittings. Recommended for petroleum and water-bases hydraulic fluids in very high pressure applications. Meets or exceeds all sae 100r12 specifications.
Construction:
Inner Tube:Polyester elastomer(cream color).
Reinforcement:One polyester braid.
Cover:Proprietary urethane blend("Tuff-Skin").
Cover color:Black,non-perforated(other colors available).
Temperature range: -40F-135F(-40C-57C)Limited to 150F(+66C)for water-based or fire resistant fluids.(Delta) working length at rated WPSI:±2% max.
Features:
Bonded construction,slim profile and light weight,flexible and kink resistant,black color denotes 4000 psi,low coefficient of friction,excellent cut,gouge and abrasion resistance 4000psi working pressure.
Applications:
High pressure water cleaning ,lateral sewer lines,water jetting equipment,not for hydraulic applications.
Construction:
Tube:Oil resistant synthetic rubber.
Reinforcement:Four tensile steel wire spiral layers. (DN10/12/16/19/25)
Six tensile steel wire spiral layers. (DN32/38/51)
Cover:Black, abrasion and weather resistant synthetic rubber.
Temperature range: -40° C to +121° C
Application:
Heavy duty impulsive high pressure hydraulic applications like excavators, dosers, dumpers, cranes, compactors, rock breakers and hydraulic drill rigs and other construction equipments. Suitable for petroleum based hydraulic fluids, synthetic esters, biodegradable hydraulic fluids, water-glycol based fluids and air.
Construction:
Inner Tube:NBR, Black, Smooth.
Reinforcement:Fine wire reinforced, Electrically conductive.
Cover:Synthetic Rubber.
Temperature:-20 C to +45 C.
Feature:Conveying medium: Industrial water, waste water, seawater and irrigation inagriculture.
Character:
The hose has dual performance that is able to bear positive & negative pressure, it is able to work freely under the vacuum-80kpa(600mm mercury column), without flat& delamination, has good flexural property. The rubber body is flexible, the burst pressure is at least treble than working pressure.
Construction:
Inner Tube:Oil resistant synthetic rubber.
Reinforcement:Two high tensile steel wire braid.
Cover:Â Abrasion and weather resistant synthetic rubber.
Temperature range:-40 C to 120 C.
Application:
Double wire braid: Recommended for hydraulic system service with petroleum and water-base fluids, or general industrial service. Long-lasting cover is suitable for many mobile hydraulic applications. Meets or exceeds all SAE 100R2 AT hydraulic hose specifications.
Construction:
Inner Tube:Oil resistant synthetic rubber.
Reinforcement:One high tensile steel wire braid.
Cover: Abrasion and weather resistant synthetic rubber.
Temperature range:-40 C to 120 C.
The curves and characteristic parameters on vulcanization of rubber material can be obtained using Rotorless Rheometer based on the measurement of the torque exerted by the rubber material on the oscillating die.
The MR-C3 Rotorless Rheometer has excellent property of reappears and stability. In a test with good mixed rubber and the time range is 12min, the T90 may be several second difference in 4 continual experiments.
Technical indexes
Range of temperature control: from room temperature to 200?
Temperature fluctuation in die: =±0.1?
Temperature display resolution: 0.1?
Range of temperature increase: 32?/min
Measurement range of torque: 0-300dNm
Torque resolution: 0.01dNm
Angle of die oscillation: ±0.5°,±1°,±3°
Frequency of die oscillation: 1.67Hz(100r/min)
Size: 520*570*1000mm(W*L*H)
Weight: about 120KG
Power: AC220~230V,50/60Hz,3A
Product description
Model no: jsj95/200
The first stage l/d ratio: 32:1
The second stage l/d ratio: 9:1
Price: 136666 usd/set
The first stage power:260kw
The second stage power:80kw
Screw diameter: 92/200
Screw speed: 500/85
Capacity: 1000-1200kg/h
Packing: wood case or according to requirement
Certification: sgs, ce
Features:
1.Low maintenance, robustness, durable finish standards, excellent functionality
2.High-efficient force-feeder ensures high capacity feeding, low energy consumption
3. Our machine has two characteristics: high degree of automation and assembly line work.
4.The pelleting machine has good dispersion effect.
5.The machine production is very high, and the work environment is very clean.
6.The technology can be adjusted according to customer's raw material.
Product description
Model no: js75b
Price: 52666 usd/set
High speed machine: 500l
Twin single motor diameter: 71mm
Main motor power: 132kw
Weight: 29.8t
Extrusino width: 1800mm
Extrusion thickness: 0.8-6mm
Capacity: 450-750kg/h
Screw l/d ratio: 32-64
Diameter: 71mm
Screw rotating speed: 600rpm/min
Main motor power: 110-132-160kw
Screw torque: 995n.M
Torque rating: 4.6t/a2
Packing: wood case or according to requirement
Certification: sgs, ce
Features:
1.Low maintenance, robustness, durable finish standards, excellent functionality
2.High-efficient force-feeder ensures high capacity feeding, low energy consumption
3. Our machine has two characteristics: high degree of automation and assembly line work.
4.The pelleting machine has good dispersion effect.
5.The machine production is very high, and the work environment is very clean.
6.The technology can be adjusted according to customer's raw material.
Model Volume Screw diameter Main motor(kw) Weight
T Width mm Thicknessmm Capacity (kg/h)
Js65b 300l 62.4mm 75 =19.5 =1000 0.8-6 200~320
Js75b 500l 71mm 132 =29.8 =1800 350~680
Js95b 800l 91mm 185 =39.4 =2150 800~1100
Extruder:EPDM sheet extrusion machine,EVA interior sheet extruder,Rubber sheet extrusion machine,such as rubber and plastic sheet extrusion machine.
Features:
1.The characteristics of the machine is advanced design, high quality, good plasticizing and low energy consumption.
2.It has the advantages of low noise, smooth operation, large loading and long life.
3.The technology can be adjusted according to customer’s raw material.
2-Use: This vulcanizing machine is used for all kinds of vulcanizing mould, rubber and plastic mould products, and non-mould products.
3-Main Features:
A.Being a column structure and downward pressing type, the heating plate opens by the self-weight of the heating plate, platform and plunger. The rising of the plunger makes the heating plate close while the hydraulic oil provides the pressure.
B.The engine base is combined together with the cylinder and base frame, which is made of ductile iron to increase the cylinder intensity and a brad ability. The cylinder is fitted with the sealing washer made of the oil-resisting rubber for the sealing purpose.
C.By moving the operational handle of the control valve to the two different positions, the heating plate can open and close.
D.It uses the electric pipe for heating, thus makes the workshop clean with easy and reliable operation.
Packing:
Exporting standard(wooden box packing)
Delivery time:
30 days after receipt deposit
Payment Term:
TT 30% deposit 70% balance payable within 3 days once received the copy of shipping docs(CI,PL&BL) Or L/C at sight with irrevocable
1) 64-bit CPU computer with faster computing speed and accurate positioning of incoming and outgoing molds, ensuring that the molds are not damaged.
2) The electro-hydraulic integrated servo system makes the machine more silent, energy-saving, fast, accurate and has low oil temperature.
3) The flow rate and pressure of each action can be set separately to meet the needs of complex production processes.
4) The fast and slow mold calibration function makes the installation of molds more precise and safe.
Applications of the rubber injection molding machine for sale
Rubber mould making machine are essential equipment in various industrial and commercial applications. YF POWER, a leading rubber injection molding machine manufacturers, produces high-quality rubber machines that are used in the production of various rubber products.
Rubber Screw Types:
You can choose different structures of the screw according to different plastic material, which can increase the plasticizing effect, such as gradual, mutant, wavy, double-flight, distributary, separating, exhausting, pin type, mixed ,etc.
1204 Rubber Machinery Suppliers
Short on time? Let Rubber Machinery sellers contact you.
