Machine performance: * Use of a jogger with air can increase productivity by up to 35%; * Jogging rate can be adjusted; * Air removal roller can be set for 0, 1 or 2 pressings; * Adjustable side flaps, convenient for paper stack transportation; * Air on main table and side flaps; * Jogger can be inclined right or left in any of 4 positions; * Either a separate compressor or house, air is needed for the pressing roller.
Machine Performance: Knife-seat guiding structure with sliding block type, cam type for adjusting-knife mechanism. Clamp press paper stack through hydraulic system, the spring re-position. Worm gear drive mechanism, hydraulic clutch, mechanical brake. WESSEL hydraulic system from Germany (optional), Italy oil pump. Switzerland ABB main motor(optional). One-piece, slotless and chrome-plated cast iron work table is sturdy and easy to maintain. Import ball screw with double linear guides to drive backgauge. Whole sealing safety guard for rear work table (optional). Germany LEUZE infrared protection device(optional). Main electronic units are from French TE and Japanese ORMON famous international brands. Technical Parameter: Model:SQZK168GM20 Max.Cutting Width:168cm Max.Cutting Length:168cm Max.Cutting Height:165mm Min.Cutting Size(without false clamp plate):30mm Min.Cutting Size(with false clamp plate):90mm Front Table Length:75cm Max.Clamp Pressure:50000N Max.Cutting Speed:42time/min Main Motor:8.5KW Net Weight:6200Kg
Machine performance: * Clamp press paper stack through hydraulic system, the spring re-position; * Worm gear drive mechanism, hydraulic clutch, mechanical brake; * Hydraulic system adopts Germany advanced technology, the hydraulic units are ISO approved; * One-piece, slotless and chrome-plated cast iron work table is sturdy and easy to maintain; * Import ball screw with double linear guides to drive backgauge; * High safety infrared protection device according to CE standard; * Main electronic units are from French TE and Japanese ORMON famous international brands; * Whole sealing safety guard for rear work table (optional). Technical Parameter: Model:SQZK115GA20 Max.Cutting Width:115cm Max.Cutting Length:115cm Max.Cutting Height:165mm Min.Cutting Size(without false clamp plate):30mm Min.Cutting Size(with false clamp plate):90mm Front Table Length:71.5cm Max.Clamp Pressure:40000N Max.Cutting Speed:43 time/min Main Motor:4KW Net Weight:3700Kg Gross Weight:4100Kg Packing Size(L*W*H):285*190*210cm
Machine performance: * Hydraulic knife and clamp activation; * Import hydraulic control solenoid; * Linear guide, ball leading screw, chromed work table; * Patent of invention: ZL200810062224.X,owned intellectual property right; * Belong to provincial scientific research achievement project; * Energy-saving power is only consumed when cutting and clamping; * Perfect for small to medium printing operation.
Machines are available in sizes 26"-60", cutting capacity 4"to 5-1/2" thick pile stock.Hand & power driven. Wooden case packing
Machines are available in semi-automatic, fully automatic(hydraulic) & fully automatic(programmatic)models in sizes 33", 37" & 43". Wooden packing
Semi-automatic double wire binding machine can be feed by spool or through forming machine. The machine counts, cuts and places the wire in position to be closed. The operator places the perforated book on the table where the machine takes the book and places it in the wire before closing the wire. The machine can produce between 600-900 books per hour, depending on operator. This machine is ideal for the production of notebook, calendars, agendas, albums, etc. Technical data : Binding wide : 80-520 mm Binding speed: up to 1000 volume/hour (based on your proficiency level) Wire diameter: 1/4 -3/4 Power: 1(ph)220v 50/60hz (other voltage on request) Weight: 300kg Machine dimensions: 780x730x1150mm Package way: wood case package
The semi-automatic double wire inserting and closing machine. The machine takes the double wire from either a spool or the forming machine and counts it. Once the appropriate number of loops are counted it cuts the wire into a strip and transports it onto the book insertion section. The operator takes the pre-perforated sheets and places the sheets onto the wire. Because that the binding lays on a rail it is very easy for the operator to fix the pre-perforated sheets in the double wire. The sheets with the inserted double wire are then pushes onto a pushing device that transport the group into the closing section. The finished product is delivered onto a delivery conveyor. Technical Data : Binding wide : 80-360 mm Binding Speed: Up to 1000 volume/hour (based on your proficiency level) Wire diameter: 1/4 -1 1/4 Power: 1(PH)220V 50/60Hz (other voltage on request) Weight: 300KG Machine Dimensions: 2020x950x1250mm Package:wood case package
The machine is suitable for punching holes in all kinds of books, calendars paper, tutorial paper, pp in batch. This machine with functions of automatic separating, punching and receiving paper together. It provides your a high cost performance by concise and rational design. 1. Simple and convenient to adjust the size and moudle . 2. Flexible seperating paper mechanism and no need to turn over the papers to guarantee high compatibility and low failure rate. 3. Easy operation system to be controlled without professional experience. 4. High quality for punching without deckle edge and accurate punching position. 5. Optional punching moulds. Max. Sheet:320320mm Min. Sheet:13095mm Punching speed:4200-5400 times/hour Power:1ph 220v 50/60hz(other voltage is available) Size: 18009001300mm Weight: n.W.:635 kg g.W.:750kg Package: wood case package
For the mass production of double loop wire that can be used for binding notebooks, calendars, agendas, albums, etc. The machine converts straight spooled wire, either nylon coated, tinned or galvanized to formed double loop wire that can be then spooled, cut and placed in boxes or attached directly to the binding machine. Can produce between 400-600 loops per minute. Technical data: Speed: 350-500 loops/min Power: forming machine: 0.75kw Coiling machine: 0.37kw Paper cutting machine: 0.25kw Power: 3ph 380v 50hz(other voltage on request) Forming machine: 2400x650x1700mm Coiling machine: 1300x1000x1200mm Paper cutting machine: 600x500x1400mm
Applicable technical parameters Tube inner diameter: 50 ¨c200mm Tube thickness: 2-15mm Paper plies: 25plies ( can be adjusted, depends on paper material and tube thickness. Paper gramme: 150-600gsm Machinery speed: 0-15m/min (depends on paper material , making tube¡¯s size and operator skill In-line cutting unit:single circular knife In-line cutting length:1000-4000mm Machinery consists detailed description: 1. Adopt hang-type operation panel, more convenient for operation 2. Adopt infrared ray set cut length, convenient and accurately 3. Mechanical loading paper reels, reduce labor force 4. Paper ply tension control system, cylinder press paper ply firmly, can adjust tension freely 5. Supply gluing pots and pressure tension control system adopt single or double side gluing depends on tube required strength 6. Flanged shaft with flexile design, suit with tapered mandrel, can do fine-turning to tube inside diameter. 7. Machine frame is with the anti-deformation treatment, ensures machinery running stability and working precision. Note: above are just parts standard technical parameters of ljt-4dnc paper tube machine for reference for confirm the most suitable mold, please tell us your practical parameters and requirements by email, then we will give you our advise and machine details, thanks. Mainframe dimensions:5000*1650*1900mm Weight:7ton
Detailed product description Hjq-d paper tube recutter: cutting long tube into short ones. 1. I.D.: 40-150mm 2. Thickness: 3-15mm 3. Length: 90-1600mm Hjq-d paper tube recutter: Applicable technical parameters: 1. Inside diameter: 40-150mm 2. Parent tube length: 1600mm 3. Min.Recut length: 90mm 4. Wall thickness: 3-15mm 5. Knives: 11sets 6. Working air pressure: 0.6mpa 7. Operator: 1 person Main functions: 1. Manually uploading the paper tube and unloading the paper cores 2. Manually adjust the distance of knives. 3. Cut by 2 knives continuously almost in the same time. By container according to the machinery size. Dimensions:2500*700*1300mm Weight:500kg
Applicable technical parameters Base paper material Kraft paper, brown paper, bobbin paper The o.D of parent roll 1200mm(can made in order) Paper weight 200- 600gsm The o.D of rewind roll 1200mm The width of parent roll 1600mm(can made in order) Machinery speed 0-200m/ min The slitting width of rewind roll Min. 90mm Rewinding mold Centre rewinding Machine functions: 1. Equips lifting and clamping mechanical arms to lift, clamp and adjust jumbo paper roll, improving efficiency and reducing manual; 2. Motor-driven to lift knife carriage. Keep certain distance between knife carriage and rewind rolls, ensure precise slitting; 3. Adopt big knife carriage, reduce knife-jumping phenomenon largely, ensure quicker and stable slitting process; 4. Adopt automatic pneumatic unloading technical. Avoid low efficiency by human working, reduce working intensity; 5. Adopt single-shaft center rewinding mold, reduce compressive strength requirement, ensure better rewinding effect; 6. Adopt human-machine interface specialized operation system, more convenient operation; 7. Digital control tension control system, do not need manual adjusting tension, ensure good slitting rewind effect. Note: above are just parts standard technical parameters for reference; for confirm the most suitable mold, please tell us your practical parameters and requirements by email, then we will give you our advise and machine details, thanks. Mainfram:3100*2300*1500 2.5~3ton
Detailed product description Mb-c paper core end grinding machine: smooth tube ends. 1. Id: 76-152mm 2. Thickness: 5-8mm 3. Length: 57-160mm Mb-c paper core end grinding machine: Mb-c paper tube grinding machine, tube ends burnishing, trimming, polishing: for trimming paper tube ends to be smoothly, such as dty tubes, poy tubes. Applicable technical parameters Tube i.D. 76-152mm Working air pressure 0.6mpa Tube wall thickness 5-8mm Motor 1.5kw Tube length 57-160mm Operator 1 person Speed: 35-45pcs/ min (speed changed depends on tube size) Machine functions: 1. Cylinder drive molds to trimming and chamfering tube two ends 2. The molds are with heat-processing; 3. Machine frame and door are made of cold galvanizing plate; 4. The whole machine frame with affine deformation processing; 5. The four holes for grinding heads with high concentricity and straightness processing; Note: above are just parts standard technical parameters for reference; for confirm the most suitable mold, please tell us your practical parameters and requirements by email, then we will give you our advise and machine details, thanks. 1600*1150*1150mm 500kg By container according to the machinery size.
General: - escher wyss, two fourdriniers, base ply & top ply each with step diffusor headboxes - installed in 1986, complete with recent rebuilds. - 4500mm trimmed width - white top & linerboard basis weights 100 – 200 gsm; sack kraft 60-160 gsm - 470 tons/day, speed range 350 – 465 m/min, drive speed of 450 m/min - complete, and in excellent condition Approach flow system: – refiner: 6 x 34'' sprout waldron double disk 1986 – cleaner top ply: enso twins 4 stages 1986 – cleaner bottom ply: richard berg 4 stages 1986 – primary screen: ahlstrom centriscreen 1986 – secondary screen: jonsson/sunds vibration type, 1986 40' container, sea worthy packing
Used 2.5m (100”) wide 2.25m (88")trim paper machine by gorostidi and bruderhaus. Producing mg papers, completely overhauled in 2004. Producing 18 to 140 gsm basis weight grades at a maximum design spe 40' container, sea worthy packing
A very versatile Board Machine, operating width 4200 mm, maximum speed is 450 m/min, producing fluting, liner, plasterboard liner, brown board and other grades. Grammage produced 110 to 600 gsm. Commissioned in 1988, latest upgrades in 2000-s. Installed production capacity is up to 450 t/day and the mill produced in excess of 110,000 t/year. 3 Stock Preparation Lines Line 1 – bottom layer. Horizontal pulper, 200 TPD, equipped with ragger, waste paper conveyor, two stock pumps with motors, stock chest, two more stock pumps with motors, three HD cleaners, secondary sorting pulper (200TPD), stock chest, two pumps, twin pressure screen (holes diameter 4 mm), rejects to chest, rejects pump, two vibrating screens (holes 6 mm), stock chest, stock pump, deflaker, twin disc refiner, stock chest with agitator, machine stock chest. All Polish and Russian built. Line 2 – middle layer. Horizontal pulper, 200 TPD, equipped with ragger, waste paper conveyor, two stock pumps with motors, three HD cleaners, stock chest, two stock pumps, secondary sorting pulper (200TPD), stock chest, two pumps, three twin pressure screens (holes diameter 2.6 mm), stock chest, stock pump, hot dispersion plant, screw press, steam channel, disperger, thickener, stock chest, stock pump, 4 deflakers, 2 disc refiners, stock chest with vertical agitator, stock pump, machine chest, two thickeners, disc filter. All Polish and Russian built. Line 3 – surface layer. Horizontal pulper, 200 TPD, equipped with ragger, two stock pumps with motors, stock chest, 2 stock pumps with motors, two HD cleaners, stock chest, two pumps, three disc refiners, stock pump, machine chest. All Polish and Russian built. Pressure screens for formers 7 Tampella pressure screens complete with motors Rejects screens 7 vibrating screens PS3100 (Finland) Board machine Seven Escher Wyss vacuum formers, stainless steel, 4-zones vacuum. First press suction press with pneumatic loading. Couch press. Combi-press. Second press. Automatic felt feeding horizontal. Automatic felt feeding vertical. Tail feeding - air feed. Rope feed system. 93 drying cylinders, 1500 mm diameter, face 4910 mm. 2 cooling cylinders, 1500 mm diameter, face 4910 mm. Pocket ventilation system. Size press: 1st roll diameter 800, face 4680 mm; 2nd roll diameter 800, face 4680 mm. Reel-up. NOTE: Some Drive Cabinets and Control Panels have been stripped of some components. Some power supply components and cables are missing. The mill stopped production in 2007. Rewinder Rewinder, 4500 mm, speed up to 1200 m/min. 40' container, sea worthy packing
*used voith paper machine. Manufactured 1965. *hydraulic headbox type 2, installed in 1974 by voith. Slice: 3260mm. *wire width: 3450mm. Trim width: 3000mm. *egoteur diameter: 400mm. *dryness after couch roll approximately 28%. *open draw to first press. First press: suction roll as under roll even blind drilled. *dryness after first press approximately 40%. *second press: solid reverse press. Dryness after second press approximately 46%. *third press: solid press. Dryness approximately 50-52%. *fourth press: offset press predryer ir on dryer 2 approximately 900 kw. Ahead of presnip is a steambox from vib. *predryer section consists of (18) dryers. Diameter 1500mm x 3300mm. Pressure 3, 3 bar. Billblade coater with following air =-turn from spooner. *coating quantity total up to 26g/m2. *intermediate dryer section (7) dryers, diameter 155mm x 3300mm. *coating station for top and back built by kmw, rebuilt 1994 by btg to abc as run today with bentblade. *included ir from solaronica/irt 450 and 500 kw. *after dryers (17) pieces, the first (2) cylinders without steam with chromium-plated area, the rest diameter 1500mm x 3300mm. Pressure 2, 5 bar. Mat *on line calender form kuster with (2) polymer covered rolls, (1) is an s-roll. Nip is soft-soft. The calender is from (70) ties. Automatic *tambour turning with pope from umv built 1996. Drive from stromberg. Each dryer has own ac motor. Design speed 500m/minute. Electrical, the machine can run faster, but depending on the open draw (no pick up) the speed is limited to 400m/minute. Grammage: double coated wood-free paper 100-300gsm. 40' container, sea worthy packing
Paper machine producing coated one side wood free speciality paper. Production 55, 000 t/year, 20-26 t/hour. Machine speed maximum 800 m/min, grammage 40 - 120 gsm, wire width 2760 mm, trimmed reel width 2520 mm, jumbo reel diameter 2100mm, jumbo reel weight 10 t, maximum coating weght 14 gsm, solid content after press section : typical value 43%. 40' container
Economical 5 sheets home/office shredder Model no. S0510p Cutting style strip cut Sheet capacity 5 sheets Cut size (mm) 6.8 Continous shredding ¡ý20 times Throat width (mm) 4 x 220 Switch auto-start /off /reverse Media capacity n/a Speed (m/min) 3.8 Bin volume (l) 10l Noise level (db) < 72db Rated power /current 120w 10w/1.2a 0.1a Frequency 50-60hz Voltage 100-120v/220-240v Net weight (kg) 1.6 Machine size (mm) (l x w x h): 300 x 162 x 280 head size (mm) (l x w x h): 300 x 120 x 75.
