We have passed coa test, fda, ec, kosher, iso9001:2000, iso22000:2005
Supplying range as below, 1) tank (pressure vessel) volume: 0.5-5000 cubic meters 2) dimension: we could design diameter and height as per customers' request 3) material: stainless steel (304 or 316l) 4) tank shell thickness: 1.5-8mm5) pressure (mpa): atmospheric pressure-middle pressure (according to the chinese design standard) 6) function: storage or fermentation tank 7) design temperature: -5-80 degree 8) medium: various drinks including wine, beer, fruit juice, and so on. 9) tank surface: the original surface of the stainless steel plate (or polishing if required) 10) operation plate form: we can design the platform if required. 11) mixing: top side or bottom mixing. 12) general accessories(if required): manhole, cip, respirator, sight glass, mixing 13) manufacture standard: chinese pressure vessel design and making standard 14) guarantees inner quality and safety, good looking appearance and function by introducing international advanced large-sized equipment of pulse plasma arcwelder and auto polishing machines and cooperating with international famous finished
Pallet racking 80*60*2.0(75pitch) k80*50*1.5 90*70*1.8(50/75/76.2pitch) k100*50/40*1.5 90*70*2.0(50/75/76.2pitch) k120*50/40*1.5 90*70*2.3(50/75/76.2pitch) k140*50/40*1.5 100*70*1.8(50/75/76.2pitch) k160*50/40*1.5 100*70*2.0(50/75/76.2pitch) 100*70*2.3(50/75/76.2pitch)
Specifacation: Our 10000m3 bio gas balloon is made of high-strengthened, high-elastic synthetic engineering membrane and of perfect anti-acid and anti-corrosion ability. The biogas specific membrane had been widely used in foreign energy treatment, sewage treatment and other industries. This has been tested that the service life is at least 15 years. Contents: 1. It can store large amount of biogas. 2. The biogas tank is separated with fermentation cylinder, when goes in trouble, it will not influence the other. 3. We have designed 5 capacity ir detectors along the outer membrane instead of internal traditional ultrasonic detector. For long years of be specific in our biogas tank manufacture, we have many unique design that other company may not have. 1. Ventilation between the inner membrane and outer membrane. If there is few biogas in the air between, so we must ventilate. As we konw biogas are explosive gases, so it would be dangrous to let it be there. 2. Dranage design between the inner membrane and outer membrane. If there is temperature difference, it will form condensation water. Specially, in cold area, water will easily freeze, this will totally do harm to the storage system. So we have dranage sybetween the inner membrane and outer membrane. 3. Special designed inner membrane We have taken advanced tension structure, which makes the inner membrane try to be as less folded as possible. This will greatly increase the lifespan of biogas tank Wooden box / customized for your requirement
The horizontal distilled water tank series trictly tally with the 31st and 32nd clauses of 'medicine production quality management normal gmp general principles' and is designed, manufactured and accepted according to the requirements of gb150-98'steel pressure vessel' and jb/t4735-97 'steel welding normal vessel' . 1. Heat preservation material of the vessel adopts high-temperature resistant and antiaging polyurethane blister or pearl cotton. 2. Joints adopt international general iso package chuck, inner container adopts imported stainless steel sus316l or sus304, internal surface is polished to ra 28 m, and external surface polishing, mirror polish, sand blasting or cold-rolled nature-color surface polishing. All is in accordance with cgmp medical standards. 3. Orifice is set with level gauge (static-pressure type, capacitance type, non-contact type, ultra-sonic type and glass tube type), air respirator, thermometer (digital display type or dial plate type), cip cleaning mouth, sip sterilizing mouth, liquid entrance-exit gate and sanitary inlet. 4. Volume specification: 100l-30000l or to be designed and manufac-tured at customers' actual request. 5. Relevant gmp testing data are attached in the machine.(including ma-terial report, external com-ponents certificate of quality and verification form). Soft cloth & plywoodcese
Transport tank / milk tank /wine tank The tank made in our company in liquid food transferring car is fit to use in long distance transfer of liquid food such as milk. The body adopts high quality su304-2b stainless steel, the jacket adopts heat insulation construction and new bubbling craft, the turning angle in the wall of tank adopts circular arc without dead angle, and cleaning spraying tip is fixed in side, which enables easy cleaning. It is up to industry standard and food sanitary requirements Soft cloth & plywoodcase
The tank body use flat or corugate structure panel. With the accessories of walk way, stairs, guardrail, pipes. Also with sand-proof and rain proof shed. Tank body, walkway and stairs are made of skid-proof steel sheet and galvanized steel sheet. The guardrail is made of square tube, with folding structure.
The tank body use flat or corugate structure panel. With the accessories of walk way, stairs, guardrail, pipes. Also with sand-proof and rain proof shed. Tank body, walkway and stairs are made of skid-proof steel sheet and galvanized steel sheet. The guardrail is made of square tube, with folding structure.
The tank body use flat or corugate structure panel. With the accessories of walk way, stairs, guardrail, pipes. Also with sand-proof and rain proof shed. Tank body, walkway and stairs are made of skid-proof steel sheet and galvanized steel sheet. The guardrail is made of square tube, with folding structure.
Our cones are adopt 100% polyurethane material or abrasion-resistant alloy material, and we use clamp design, that can ensure long usable life and easy maintenance. It is the ideal products to match desander cleaner and desilter cleaner. Our company culture is: noble heart, better done, best future. We devote to make a world famous brand and top quality products.
We have a wide range of SS Storage Tanks and Pressure Vessels to suit industrial requirements, various sizes and designs to suit specific customer needs. Many of the products are available in ready stock for instant delivery commitments or can be delivered on short notice. We have a wide range of SS Storage Tanks and Pressure Vessels to suit industrial requirements, various sizes and designs to suit specific customer needs. Many of the products are available in ready stock for instant delivery commitments or can be delivered on short notice.
Detailed Product Description 1, Square diesel oil tank 2, Square elevated diesel oil tank 3, The circular diesel oil tank 4, Circular elevated diesel tank .
Above ground, under ground, low profile rectangular tank .
1. To store marsh gas, carbon dioxide gas 2. Easy to remove and storage after folded 3. Any size OEM service available The gas tanks are made by reinforced fabric with PVC coated. It could be used to store and collection industrial gas, biogas as a gas supply station. The maximum inner gas pressure is 3kPa. Its advantages are: 1. Can be folded easily when empty 2. Light weight and easy to transport 3. Simple on site installation; long life and low maintenance costs. Carton box.
1. To transport ammonia and liquid chemicals ect. 2. Easy to remove and storage after folded 3. Any size OEM service available The tank is made by material of reinforced fabric with TPU (Thermoplastic Polyurethane) coated. It has great strength. The outer surface of the material is with anti UV function to fight against bad weather conditions, so it has a long life. Carton box.
1. Used for horizontal direction drilling fluid treating 2. We are manufacturer with mature technology. According to requirement.
Pactec flexitank satisfy the logistical needs of our customer and maintains the integrity of the shipping container.
Gas tank installation.
Application It is applied to liquid preparation and various water treatment process in purgative area, such as infusion solution, injection solution, eye drop, oral liquid and blood preparation. Description: Specification: 30L~50000L Material: SS316L or SS304 Surface finish: inside surface is Ra0.28~0.6¦Ìm by mechanical polish. (passivation or electropolish are optional). Outside surface is Ra0.6~0.8¦Ìm by satin finish. Agitator: Top mechanical agitator (propeller, spiral and anchor or others) Pressure: ATM or pressure vessel (-0.1~1Mpa) Structure: Single layer vessel, vessel with jacket, vessel with jacket and insulation Jacket type: dimple jacket, full jacket, or coil jacket Insulation material: rock wool Components: vent filter, temperature gauge, level gauge, manhole, sight glass with lamp and cleaning ball or according to clients detail requirement. Manufacture standard for pressure vessel: GB150-1998, ASME or PED/23/EC.
Flexitank is an ideal product to store and transport all kind of non-hazardous liquids and chemicals.
