Cover width 750mm Coil width 1000mm Wave height 51mm Wave length 185mm According to customer requirements, custom roll forming machine. Unpacked
The scotch brite roller grinding machine is to obtain no.4 hl, no.6 surfaces finish, use scrotch-brite roller, the material can be stainless steel sheet aluminum sheet or other metal sheet , the metal both sheet or coil. It usually use 4 scrotch-brite rollers of diameter 300mm and the 4scrotch-brite rollers(wheels) work separately or together. The processing of the machine mainly is : Metal sheet(flat or coil) ----grinding machine----film laminator(laminate protective film on the sheet surfaces in order to protective the sheet)-----metal sheet Main technical data: Machine modelms4r-127 Working work piecethickness0.5-50mm Lengthmore than 400mm Width40-1270mm mm Feed speed6-30m/min Motor power (kw)main motors7.5kwx4 Feed-through motor3.0 Cleaning brush motor0.37 Airconsumption volume 0.9m3/min Working pressure0.55mpa Dust exactorwind volume6500 m3/h Pressure2300pa Wind speed25-30m/s Machine sizethe main machine2050x1650x2620mm Control cabinet400x1140x850mm Net weightabout 4, 400kgs Machine modelms4r-160 Work piecethicknessabout 0.5-30mm Lengthmore than 400mm Width40-1580mm mm Max.Feed speed15 m/min or 20m/min or 30 m/min Motor power ú¿kwú¬main motors12kwx4 Feed-through motor3.0 Cleaning brush motor0.37 Airconsumption volume 0.9m3/min Working pressure0.55mpa Dust exactorwind volume7500 m3/h Pressure2500pa Wind speed25-30m/s Machine sizethe main machine Control cabinet Net weightabout 4, 800kgs Export standard
It is very useful for extrusions plan and other factory where wire, stripe, section straightening requirement, machine is very accurate for straightening. It comes in many models.
Kt-328b single head saw Primarily used for cutting industrial profile and aluminum alloy curtain wall and window profiles, also used for cutting plastic material. It utilizes hard alloy saw blade for external diameter is as big as 20", the linear speed is high, and the processing precision is high. The blade of the machine can be rotated between 90-degree and 45-degree. Can adopt digital display device, resulting in accurate positioning. So it is an ideal choice for cutting extra-thick industrial profile, aluminum doors and windows and curtain walls profiles. Main technique parameter 1.Cutting length...........................80~2080/3080mm 2.Cutting width * height...................230*150mm ...................280*150mm 3.Main motor power.........................2.2kw 4.Main motor rotation speed................2850r/min 5.Saw blade dimension......................D500*d30*120t 6.Saw blade swing angle....................90~45 degree 7.Saw blade feeding speed..................0~3m/min 8.Saw blade retracting speed...............2~3m/min 9.Operation air pressure...................0.6~0.8mpa 10.Digital display meter length............2000/3000mm 11.Operation voltage.......................380v 12.Overall dimension (l*w*h)...............950*1500*1400mm 13.Weight..................................900kg Wood box
Q35Y-12 T echnical Parameter Punching Pressure: 40T Max.shearing thichness of steel plates: 15mm Strength of steel plates: 450N/square mm Angle of shearing: 7 íp Shearing size of one stroke:15*200mm or 12*300mm Ram stroke:50mm Number of stroke:8times/min Depth of throat:175mm Punching thickness:8mm Max. diameter of punching:38mm Main motor power:3KW Overall dimension(L*W*H):1450*590*1620mm N.W:1100kg. Overall dimension(L*W*H):1450*590*1620mm N.W:1100kg package:protective film package.
1. Mechanical, electrical, hydraulic integration of Integrated machine with mechanical, electrical, hydraulic elements 2. Plc control, two axes serve motor drive 3. Graphical display of workpiece 4. Fault self-diagnosis function 5. Easy programming connectable with date files generated directly by copying the specimen Weight 20t
Modeldjx2532 Angel size(mm)140*140*12-250*250*32 Max. Diameter of holes(mm)ºµ40 Driller number on either side3 Stroke of main spindle (mm)240 Speed of main spindle(r/min)180-560 Cnc axe number3 Mold number14 Size of letter(mm)12.5*20*30 Nominal pressure of printing(kn)1000 Max. Angel length (m)11 X axe in feeding speed(m/min)10-60 Pressure of hydraulic systemhigh pressure25 Low pressure6 Power(kw)x axe4.4 A.B axe2.0 Main motor power(kw)15 Weight 23t
Spec nameddz100ddz160 Printing pressure(kn)10001600 Stroke of cylinders4545 Stroke numbers (/min)2020 Motor power (kw)1515 Size of letteruser-defined Group numbers of letter 1-4(by hands) Weight4 t
Our company specialize in the production of rolling equipment, machinery processing 1. Ability of machine processing The way of processing: the max processing equipment and prcessing ability. Steel casting: 20 tons arc-furnace steelmaking, 40tlf refiner furnace; the max elevating capacity 125t; the max casting products 80t, dimension of casting products(length, width, high) 8.5*4.5*3m, spun casting(min outer diameter, min wall thickness, max length) diameter 1000*15*4000mm; various specification steel strands. Casting iron: 7.5t/h blast cupola, 7.5t main frequency furnace, max casting product is 32t. Casting copper: 2.5t reverberatory furnace, 1.5t main frequency furnace, 1t vacuum-induction furnace, 0.2t vacuum casting plant, max casting product is 2.5t Forging: 2500t water press, 1.5t air hammer, max forging steel ingot: length is 30t, thickness is 17t Rivet welding: 80*5000mm folder, 1200t oil press, 12t edge planner, 6*20m-250mm digital controlled cutting, diameter 70mm didital controlled pipe bender, max elevating capacity is 160t 2. Heating treatment: 13000*6500*2580mm annealing furnace(max furnace is 120t, the high temperature is 11500c), 6200*2300*1500mm hardening furnace, diameter 1100*5000mm line-frequency hardening machine tool. Lathe: diameter 10m vertical lathe, diameter 150mm heavy machine vertical lathe Boring machine:diameter 250mmdiameter 150mm heavy machine vertical lathe Shaper: 4000*1250*1250 Planing machine: 15*3m planer Grinding machine: diameter 800*4500mm cylindrical grinder, 500*4000mm surface grinder. Drilling: 10m drilling
Heat insulating profiles corner making machine Put the gusset into the 45 aluminum alloy window profile, move the bump folks, squeeze the two window profile tightly and make a 90angle firmly. You can adjust the machine to 1-side-four-point crimping according to the characteristic of the gusset. Because of enlarging the size and the crimping force, it is an ideal choice for the corner crimping of thermal-break door and window profiles. Main technique parameter: 1oil pump motor power:3kw 2oil pump rated pressure:16mpa 3working pressure:0.6-0.8mpa 4max. Working stroke:80mm 5max. Working push:5000kg 6overall dimensionlwh:120010301000mm 7weight:500kg.
Adopt 20hard alloy saw blade and auto-spray lubricating and cooling system, ensures high cutting linear velocity and high surface finish quality and high accuracy. The saw blade may rotate from -90~0~+67.5, extended cutting range. Adopt straight forward type feeding, hydro-pneumatic damper stepless speed governing system, ensures smooth feeding. Can realize vertical cutting through adjust the rear positioning shelf when at -90 degree. CNC control of the saw blade feeding height and digital display of the rotating angle degree. Adopt the imported integrated plc control, with the self-measuring and self-diagnosing function. The circuit is of high stability and nice environmental applicability and can upgrading by long distance operation through net-works. Main technique parameter: 1cutting width + cutting height (straight cutting):215+150 mm/ 250+135mm 2power of main motor:3.0kw 3speed of main motor:2840r/min 4saw blade size:500+30+120t 5rotating angle of worktable:-45~0~45 6saw blade feeding speed:0~3m/min 7saw blade returning speed:2~3m/min 8working pressure:0.6~0.8mpa 9working voltage:380vac 10overall dimensionl+w+h:1200+1100+1400 mm 11weight:900kg .
This series is used for surface cleaning, rust romoving, and surface intensification of each kind of middle and small scale casting, forging and job. It is suitable for diffenent production scale, can be stand-alone use and many units can also be used in conjunction wi th the continuous conveyor components, composing the production of clean-up lines.
Product Detail: It is special machine used for processing series connection holes and grooves and the transmission device for plastic doors and windows. It is made up three hole drilling unit and copy routing unit. It can drill three horizontal holes and route longround holes in the vertical direction. Two working steps can be finished with one time clamping. It has the features of high accuracy, easy operation. . Main Technique Parameter: Voltage:380V~415V/ 50HZ Motor Power: 2.25Kw Air Pressure:0.5~0.8Mpa Air Consumption:30L/Min Hole Adjusting Range: 330*85*100mm Copy Routing Range: 90~290mm Overall Dimension:1000*1130*1500mm Weight:260KGS HONGKONG
Working blade length:400mm,600mm,700mm,800mm,1000mm,1200mm. The length of blade over 700mm can be used to shear waste car.
Roll turning lathe slotting milling machine.
Aluminum continuous caster rolling mill.
Steel rolling mill.
Steel rolling machine I. Specification of the steel rolling machine(new, second) Dia 650mm, dia 500mm, dia 450mm, rough rolling mill group, dia 400mm rough rolling mill group and medium rolling mill group, dia 320mm medium rolling mill group, dia 300 medium rolling mill group, dia 280mm, dia 250mm, dia 220 finishing rolling mill group. (note: all the groups include motor, speed reduction unit, link-up, guide rail, roller etc.) Ii. Rolling steel products: I-bar, angle bar, u-bar, round bar, deformed steel bar, strap steel, rail steel, steel for agricultural-purpose xxxxx Iii. Types of service: 1. Providing model, design, manufacture, installation and commissioning as to the requirements of the customers. 2. Providing the plane design, general layout of the equipment; process design and products design of steel rolling etc. Various technical design. 3. Dispatching various technical staff to the site for the technical services till the finished products as to the requirements of the customers. 4. Providing long-term technical service to the customers as to their requirements, mainly adjustment of steel rolling mill, new products development, equipment maintenance and improvement.
C-type power press
íºípFinal black oxide treatment is applied for appearance and improved corrosion resistance íºípApplications: automobile industry, electric industry, mechanical industry and military usage íºípOEM and ODM is our specialty íºípWith complex geometry, high density, tight tolerance, and high performance notspecified
