Specifications Travel range: +/-12.5mm Table size: 65x65mm Overall thickness:23mm Flatness:++10++m Pitch++30fs Yaw++20fs Weight : 5kg .
Axes adjustment : Xy axes Travel range (mm) : 13 Swing error : ++30+s Driver : micrometer Graduation(mm) : 0.01 Sensitivity(mm) : 0.001 Max. Load capacity (kg) : 7 Weight (kg) : 0.4.
Movement of optical tubes: Horizontal:adduction + 50deg Abduction - 40 deg Vertical:hyper 30 deg Hypo 30 deg Torsional:incyclo 20 deg Excyclo 20 deg Slide illumination:- By rheostat controlled 6v lamp for each slide. After image illumination by 6v lamp Auto flashing:- Auto flashing of slide illumination either simultaneously or alternatively in rapid & variable modes Mode & mode selection: Five modes of slide illumination namely normal, flashing right, flashing left, flashing r+ l & auto flashing can be selected by a single selector knob. Dimensions:- Longitudinal: 30.3 cms Lateral: 25.5 cms Vertical: 36.5 cms Weight: 20 kgs Power supply: 220 v ac / 110v Standard accessories:- A set of slides containing 9 pairs, one power cord, one dust cover, spare 6v bulbs (2 nos) Optional accessories:- Instrument table: manual or motorized Haidinger brush attachment.
Fusion splicer pt-630 Features Fiber core can be display clearly Singlex or y view and x & y view simultaneously Auto check quality of cleaved end face Auto select best splicing program 9 seconds splice time and 30 seconds heat time Small bulk and light weigh 5 inch color lcd monitor with clear digital image display Simple operation menu Software upgrade via usb interface Specification Model Pt-630 Applicable fibers Sm (itu-t g.652), mm (itu-t g.651), ds (itu-t g.653), nzds (itu-t g.655) Fiber cleaved length 12~16mmú¿coating diameterú¦250ª8mú¬ 16mmú¿coating diameter: 250 ~ 1000ª8mú¬ Fiber diameter Cladding diameterú¦80 ~150ª8m Coating diameterú¦100~ 1000ª8m Fiber count Single Fiber aligning method Core aligning Image processing method Digital Actual average splice loss 0.02db ú¿smú¬, 0.01db (mm), 0.04db (ds), 0.04db( nzds) Splicing time Typical 9 secú¼with standard sm fiber Splicing mode 53(templet), 40(user) Splice loss estimate More accurate Return loss ú+60db Storage of splice result 5000 resultsú¼3 parameter per result Fiber display and magnification 400xú¿x or y viewú¬, 200xú¿x and y viewú¬ Tube heating time Typical 30 sec Tube heating mode 9(templet), 24(user) Tube heating temperature Can be adjusted Applicable protection sleeve length 60mm, 40mm and a series of micro sleeves Tension test 2n Electrode life 2500 No.Of splice/heating with battery Typical 130 cycles (splice/tube heat) with inner li-battery Display screen 5 inch color lcd monitor Image change over The fiber image is turned upside down Terminals Rs 232 Operating condition 0 ~ 5000m above sea level, 0 ~ 95%rh and -10í½50íµ, respectively, max. Wind velocity of 15m/s Power supply Ac 100-240v with ac adapter; inner li-battery(6600mah) Dimensions 150mm(l) x150mm (w) x150mm (h) Weight 2.7 kg excluding battery, 3.2 kg including battery
Fusion splicer pt-650 Features Equel to fujikura fsm-50s, sumitomo type-37 etc Core to core alignment by pas technology ( pas:profile alignment system) Digital fusion splicer with automatic focus function Fiber core can be display clearly Single x or y view and x & y view simultaneously Auto detect cleaved endface fault Display fiber cleaved and offset angle Display core and clad offset 5.6 inch tft color lcd monitor with clear digital image display Usb & vga interface Software upgrade via usb interfac Specefication Model Pt-650 Applicable fibers Sm (itu-t g.652), mm (itu-t g.651), ds (itu-t g.653), nzds (itu-t g.655) Fiber cleaved length 12~16mmú¿coating diameterú¦250ª8mú¬ 16mmú¿coating diameter: 250 ~ 1000ª8mú¬ Fiber diameter Cladding diameterú¦80 ~150ª8m Coating diameterú¦100~ 1000ª8m Fiber count Single Fiber aligning method Core or clad aligning Image processing method Digital Actual average splice loss 0.02db ú¿smú¬, 0.01db (mm), 0.04db (ds), 0.04db( nzds) Splicing time Typical 9 secú¼with standard sm fiber Splicing mode 53(templet), 40(user) Splice loss estimate More accurate Return loss ú+60db Storage of splice result 4000 resultsú¼20 parameter per result Fiber display and magnification 300xú¿x or y viewú¬, 150xú¿x and y viewú¬ Tube heating time Typical 30 sec Tube heating mode 9(templet), 24(user) Tube heating temperature Can be adjusted Applicable protection sleeve length 60mm, 40mm and a series of micro sleeves Tension test 2n Electrode life 2500
Fusion splicer pt-660 Features Color lcd monitor and 256x magnification Compact and lightweight Reversible monitor with control panel on each side Maximum wind velocity: 15m/s 8sec splice time, 40sec tube-heat time Simultaneous x and y views Large capacity internal battery System test: ensures the best working condition User programmable Auto check fiber end face Auto calibrate parameters Store 8, 000 groups of splice results Multiple language options Specification Model Pt-660 Applicable fibers Sm (itu-t g.652), mm (itu-t g.651), ds (itu-t g.653), nzds (itu-t g.655) Fiber cleaved length 12~16mmú¿coating diameterú¦250ª8mú¬ 16mmú¿coating diameter: 250 ~ 1000ª8mú¬ Fiber diameter Cladding diameterú¦80 ~150ª8m Coating diameterú¦100~ 1000ª8m Fiber count Single Fiber aligning method Core or clad aligning Image processing method Digital Actual average splice loss 0.02db ú¿smú¬, 0.01db (mm), 0.04db (ds), 0.04db( nzds) Splicing time Typical 8 secú¼with standard sm fiber Splicing mode 53(templet), 40(user) Splice loss estimate More accurate Return loss ú+60db Storage of splice result 4000 resultsú¼20 parameter per result Fiber display and magnification 300xú¿x or y viewú¬, 150xú¿x and y viewú¬ Tube heating time Typical 30 sec Tube heating mode 8(templet), 24(user) Tube heating temperature Can be adjusted Applicable protection sleeve length 60mm, 40mm and a series of micro sleeves Tension test 2n Electrode life 2500 No.Of splice/heating with battery Typical 150 cycles (splice/tube heat) with inner li-battery Display screen 5 inch color lcd monitor Image change over The fiber image is turned upside down Terminals Usb 1.1 and vga Operating condition 0 ~ 5000m above sea level, 0 ~ 95%rh and -10í½50íµ, respectively, max. Wind velocity of 15m/s Power supply Ac 100-240v with ac adapter; inner li-battery(6600mah) Dimensions 170mm(l) x170mm (w) x140mm (h) Weight 2.7 kg excluding battery, 3.3 kg including battery
2D optical measurement instrument Machiner Properties: Saving over thousands of specifications, simply one lesson will do, easily click to load the related setting data. Rapid measurement and the measurement result can be able to save for analysis or inquiry purpose. Well apply to at-site inspection, sampling inspection for Q.C. and before delivery. Inspection items: 1.Hole diameter 2.Diameter 3.Concentricity 4.Roundness 5.Straight line distance 6.Center distance 7.Straightness 8.Perimeter 9.Area .
Rotatory glass plate optical sorting machine Machine's Character: * Measurement for simultaneous top/bottom inspection. * Also suitable for tiny electronic parts. Adaptable Product: O-ring, seal, packing and product can stand stably on the glass surface. Inspection items: 1.Hole diameter 2.Concentricity 3.Thickness 4.Crack 5.Color 6.Surface Stain 7.Bubbles 8.Burrs.
Fastener, nuts sorting machine Machine's Character: * Variety of inspection modules satisfied for the most of inspect needs. Adaptable Product: Nuts, rivet, roller, washer, stud, set screws and products can stand stable on the belt. Inspection items: 1.Thread 2.With coating 3.Hole diameter 4.Outside diameter 5.Concentricity 6.Roundness 7.Overall height 8.Deformed 9.Crack 10.Marking 11.Width/length 12.Thickness.
Rotatory plate optical sorting machine Machine's Character: * Quick & easy to chnage different specifications. * Friendly interface for setting measurement items. Adaptable Product: Screws, rivet and product can be hung well on the plate. Inspection items: 1.Roundness 2.Major diameter 3.Minor diameter 4.Spiral angle 5.Pitch 6.Necks down length 7.Included angle 8.Head thickness 9.Head diameter 10.Head crack 11.Hole diameter.
Eddy current sorting machine Inspection items: 1. Recognition of hardness difference , accurancy 2 HRC ( +/- 1HRC) 2. Recognition of different metal material mixed. 3. Same size with similar material parts mixed 4. With/without high frequency harding difference. 5. Dimension measurement of appearance by laser or optic ( extra optional) 6. crack sorting (extra optional).
Prism Material: Flint glass, UV fused silica, Infrared fused silica, CaF2, Ge, ZnSe, Si etc. Dimension: 4mm-- 100mm Angle tolerance: 30" --3' Surface accuracy: ª-/10--1ª- Surface quality: 60/40 Clear Aperture: 90% Coating: custom design According to custom design to manufacture kinds of right angle prism, equilateral prism, dove prism, penta prism, roof prism from optical glasses. Standard lot
Standard lot
Optical calcite crystal (iceland spar) both in raw material and semi-finished form or finished form (such as polarizers, waveplates, etc.) ready to be used as per customer's dimension or detail technical specified. Typical products are rhombohedral shapes, rectangles and rounds, shaped plates, wedges, and cubes It is carefully selected to eliminate small inclusions, cleavage planes, cloud and mist, point defects and bubbles inside the crystal. It is known for its properties of transparency and double refraction, used chiefly in the manufacture of polarizing prisms, which are essential parts of polarization components and other special optical instruments.
There are two kinds of E-O modulations. One is longitudinal E-O modulation if the directions of electric field and light propagation are the same. The KDP isomorphic crystals are normally used in this scheme. If the directions of electric field and light propagation are perpendicular, it is called transverse E-O modulation. The LiNbO3, MgO:LiNbO3, BBO and KTP crystals are usually employed in this scheme. Our Capabilities: Dimension Tolerance: (Wí+0.1mm) x (Hí+0.1mm) x (L+0.1/-0.1mm) (L1 for 1064nm,TEM00, 10ns, 10HZ (polished only); >0.5 for 1064nm,TEM00, 10ns, 10HZ(AR-coated) ; >0.3 for 532nm,TEM00, 10ns, 10HZ(AR-coatd). Quality Warranty Period: one year under proper use.
A Pockels cell alters the polarization state of light passing through it when an applied voltage induces birefringence changes in an electro-optic crystal such as DKDP (KD*P) and BBO. When used in conjunction with polarizers, these cells can function as optical switches, or laser Q-switches. Frequently, Q-switches are employed in laser cavities for the purpose of shortening the output pulse, resulting in a light beam with enhanced peak intensity. In order to provide the device best suited to your purpose, we offer the DKDP (KD*P) series and LiNbO3 series Pockels cell. You can operate the cell with either a pull-up voltage or a pulldown voltage. Changing the polarity will only change the direction of the phase rotation. In other words, the pull-down voltage Q-switch use ª-/4-voltage pulses on the Pockels cell and the pull-up voltage Q-switch use ª-/2-voltage pulses on the Pockels cell. You should not, however, operate the cell with a constant applied voltage potential between the terminals, or a duty cycle greater than ~ 2%. Applications: OEM laser systems Medical/cosmetic lasers Versatile R&D laser platforms Military & aerospace laser systems Product Feature: 1). Industry-proven performance; 2). Dry; 3). Highest (99.8% KD*P) deuteration levels in industry; 4). Adhesive/Epoxy-free assembly; 5). Apertures from 8mm diameter up to 20mm diameter; 6). Lowest absorption in industry; 7). High-reliability; 8). Economical upgrade/rebuild program; 9). Highest optical damage thresholds; 10). Accessible technical support; 11). Standard performance documentation; 12). One-year limited warranty. 13). Operation up to 1kHz. Specification/Models: D-EO-Q-25.4-39-X-C Outline Dimension: ª¦25.4x39mm Aperture: ª¦10mm Single pass optical transmission:>98% Voltage (V ª-/4) @1064nm: 3.2KV Extinction Ratio: >1000:1 Single Pass Insertion Loss:2000:1 VCR: >1500:1 Transmitted Wave Front Distortion: ª- /10 Capacitance: 3pF Spectral Range of Operation:240-1400nm Damage Threshold: >1GW/cm2
Fujikura fsm-60s fusion splicer is a updation of fujikura fsm-50s fusion splicer, 60s machine sets the standard for core alignment fusion splicing by incorporating a user-friendly interface with enhanced features to provide the most rugged and reliable fusion splicer in the market today. The new rugged construction adds improved reliability by resisting shock, dust, and rain, and can withstand a 30" drop test. The fsm-60s splices a optical fibre in 9 seconds and heats a 60mm splice sleeve (heat shrinkable tube)in 30 seconds, for a total cycle time of only 39 seconds. New features, such as automatic tube heater operation, user-selectable clamping method (sheath clamp or fibre holder system), automated monitor tuolima image orientation, and battery charge capability during splicer operation provide the end user a productivity tool they can count on. Description: Fujikura fusion splicer, 4.1" color screen, standard accessories, including cleaver ct-30a. Multiple foreign languages menu is optional. Features: >>> core to core fiber alignment system pas environment (rain, dust, shock) resistant features >>> world's most compact and lightest of its class >>> arc calibration-free system >>> 4.1" tft color lcd monitor >>> dual-directional operating system >>> long life battery >>> fiber holder option >>> detachable work plate (attached to carrying case) Standard original fujikura packing
Fusion splicer of fitel S199M4, fitel S175V2000
Otdr of agilent e6000b, anritsu mw9076b, in stock.
Fusion splicer.
