Ptek nr3 three phase is designed to recharge medium - large capacity traction and Start lead-acid batteries, developed using our forty-year experience in the field of Battery chargers and multi-years application of microprocessor control systems which On, short check of functions and Times, option to program the equalized charge automatically, lab tested electronic Circuit conforming to the directive on electromagnetic compatibility and ce marking, Automatic disconnection of battery charger due to battery disconnection, equalization Charge based on time, charging with decreasing current (wa characteristic): 9÷11 H charging time, transformer thermal protection, modular installation on galvanized Steel base, sheet steel case with modular panels, epoxy powder coating, oven-baked, Standard colour: ral 2004 orange, option: custom-made color, logo and silk-screen Printing, mains input and d.C. Output polarized cables, complete with mains and Battery cables; assembly of plugs and battery connectors on request. “wa” characteristic (din 41774): Charge at decreasing current with intervention of adjustable final Charge from 2.35 to 2.40 v/cell., final charge with timed control 9h / 11h, fixed charging time (equalization charge excluded), equalization Charge (week-end charge) to be recalled. It will start after 55’ from Charge end, duration of equalized charging phase: each hour 5’ (repeated for 48 hours), calculation to determine the size of suitable Battery charge: 16a for every 100 ah of the battery (e.G. 500 ah Battery: 16ax5 = 80a).
ier output, rectifier bridge with snubber protection, short check of functions and times, option to program the equalized charge automatically, lab tested electronic circuit conforming to the directive on electromagnetic compatibility and CE marking, automatic Start, automatic disconnection of battery charger due to battery disconnection, equalization charge based on time, charging with decreasing current (Wa characteristic): 9÷11 h charging time, transformer thermal protection, modular installation on galvanized steel base (20/10) – (30/10), sheet steel case with modular panels (10/10 - 12/10) - (12/10 – 15/10), epoxy powder coating, oven-baked, standard colour: RAL 2002 red, option: custom-made colour, logo and silk-screen printing, mains input and d.c. output polarized cables, complete with mains and battery cables; assembly of plugs and battery connectors on request. “WA” CHARACTERISTIC (DIN 41774): charge at decreasing current with intervention of the final charge at 2.40 V/cell., final charge with timed control 9h / 11h, fixed charging time (equalization charge excluded), equalization charge (week-end charge) to be recalled. It will start after 55’ from charge end, duration of equalized charging phase: each hour 5’ (repeated for 48 hours), calculation to determine the size of suitable battery charge: 16A for every 100 Ah of the battery (e.g. 500 Ah battery: 16Ax5 = 80A).
The battery chargers of the cemb-easy 3000 Series are designed to recharge medium capacity Traction and start lead-acid batteries and are O the directive on electomagnetic Compatibility and ce marking. • option: custom-made colour • custom-made logo and silk-screen printing • complete with mains and battery cables; assembly of plugs and battery connectors On request. Technical characteristics easy 3000: • 230v - 50hz one phase supply, (with possibility to request voltages different from The standard ones), adjustable to ± 5% or ± 10% • electronic control provided with final charge timer • on-off switch • rectifier bridge with silicon diodes, natural cooling, with snubber protection and Gemov • tropicalized stray-flux transformer : tenvex copper windings with double enamel Insulation; class h; impregnated in autoclave with ecological epoxy resins. • 12/10 sheet steel case provided with electrical bondings and ergonomic handle • epoxy powder coating, oven-baked • standard colour: ral2002 red • new lexan plate with charging data very easy to understand • lab-tested electronic circuit conforming to the directive on electomagnetic Compatibility and ce marking. • option: custom-made colour • custom-made logo and silk-screen printing • complete with mains and battery cables; assembly of plugs and battery connectors On request. • charge at decreasing current with intervention of the final charge At 2.40 v/cell • final charge with timed control 9h / 11h • fixed charging time (equalization charge excluded) • equalization charge (week-end charge) to be recalled. It will start after 55’ from Charge end • duration of equalized charging phase: each hour 5’ (repeated for 48 hours) • calculation to determine the size of suitable battery charge: 16a for every 100 Ah of the battery (e.G. 500 ah battery: 16ax5 = 80a)
Noiseless and ecological electric vehicole/tractor. 16 Km/h. Direct use: you get on, drive and stop (movement dynamics). For all employees who move in a range greater than 100 mt. For quick repair service and transport of small-sized components. Average time saving of about 40 to 60 minutes per day. TECHNICAL FEATURES: - Turning radius: cm. 120 - Length. 140 - Width cm. 85 - Height. 110-130 - Minimum height from ground cm. 5.4 - Weight: Kg 120/140 depending on the type of batteries installed. - fiberglass shell fully recyclable - tube frame with thick serial number for traceability - Handlebar adjustable in height - cover tires 3.00-4 with room air (can puncture tires) - Headlight and taillight - Safety button "ride-on" - Reverse insertable lever - horn, rear view mirror and the battery charge indicator - Electric motor 24 volt permanent magnet 780 watt - Electronic high-frequency MOSFET technology controlled by a microprocessor to recover energy during braking - N. Two 12-volt batteries - lightweight tubular plate traction - 105/125 Ah. - Built-in charger and automatic battery status. - Drive chain high strength pinion - Differential aluminum satellites treated steel - Shaft couplings with 6 quarries - Voltage reducer 24 to 12 volt lighting system - Brake system: front disc brake, rear differential, brake lever on the left and engine braking enhanced by the setting of the electronic control. - Colors: white, red, green , yellow, blue, black, orange (other colors on request).
Noiseless and ecological electric tractor. 10 Km/h. -offers two different advantages: it allows to move very quickly and transport up to 300 kg of materials by using a truck designed by us. Speedy, handy in narrow spaces, it spins around with the truck within a 200 cm radius allowing quick access to other departments. Quick repair and maintenance of big- sized and heavy materials (the truck is 120x80 cm with a carrying capacity of 300 kg). Allows to avoid using big and expensive vehicles to move small volumes of goods. TECHNICAL FEATURES: - Turning radius: cm. 120 - Length. 140 - Width cm. 85 - Height. 110-130 - Minimum height from ground cm. 5.4 - Weight: Kg 123/143 depending on the type of batteries installed. - fiberglass shell fully recyclable - tube frame with thick serial number for traceability - Handlebar adjustable in height - cover tires 3.00-4 with room air (can puncture tires) - Headlight and taillight - Safety button "ride-on" - Reverse insertable lever - horn, rear view mirror and charge indicator battery 24 volt 800 watt electric motor RR 1/10 - 24 volt electric motor permanent magnet 780 watt - Electronic high-frequency MOSFET technology controlled by a microprocessor to recover energy during braking - N. 2 Batteries 12 volt - tensile tubular plate - 102/157 Ah. - Built-in charger or external high frequency and automatic control of the state of charge. - Traction Chain gear ratio 1/10, 125 - Differential aluminum satellites treated steel - axle shafts with couplings 6 slot - Voltage reducer 24 to 12 volt lighting system - Brake system: front disc brake, rear differential, brake lever on the left and engine braking enhanced by the setting of the electronic control. - Colours: white, red, green, yellow, blue, black, orange (other colors on request).
Noiseless and ecological electric tractor. Moderate purchase price In these facilities, Bigà can be used for: - individual transport of personnel - control, inspection and security service - maintenance, cleaning and transport of small packages - towing with trucks up to 800 kg GENERAL FEATURES: - Turning radius: cm. 120 - Length. 140 - Width cm. 85 - Height. 110-130 - Minimum height cm. 5.4 - Weight: Kg 120/140 depending on the type of batteries installed - fiberglass shell fully recyclable - tube frame with thick serial number for traceability - Handlebar adjustable in height - cover with 3.00-4 tires room air (can puncture tires) - Headlight and taillight - Safety button "ride-on" - Reverse insertable lever - horn, rear view mirror and the battery charge indicator - Electric motor 24 volt permanent magnet 800 watt - 24 volt 800 watt motor RR 1/10 - Electronic high-frequency MOSFET technology controlled by a microprocessor to recover energy during braking - N. Two 12-volt batteries - Traction tubular plate - 102/157 Ah - Built-in charger or external high frequency and automatic control of the state of charge. - Drive chain high strength pinion - Differential aluminum satellites treated steel - Shaft with grafts and 6 hp - Voltage reducer 24 to 12 volts for lighting system - Brake system: front disc brake, rear differential, brake lever on the left and enhanced engine braking from the calibration of the electronic control. - Blue color.
Electric handling kit 1.500/2.000 kg autonomy 5 hours in continuous Functions Stop and Go forward / backward industrial radio remote control flashing and buzzer always on at cart on Speed 4 km / h SPECIFICATIONS: Dimensions: Shopping cart Weight: Your cart + kg. 120 motor 24 V - 600 W - 85 rpm with brake assist, with manual release N. 2 Batteries GEL - 12 V Capacity: 140 Ah C20 - 105 Ah C5 Charger HF 24V - 12 A - 220 V Electronic control technology MOSFET 24 W - 140A ignition key battery charge indicator Emergency button mushroom ex-battery flashing E24 xenon Horn Operating N. 2 6-ply tires 300-4 with inner tubes and aluminum wheels on request: A) lever 2 speed '4/6 km / h B) electric motor brake release lever TECHNICAL RADIO CE: with battery charger Protection transmitter / receiver: IP67 Operating temperature -20 / + 55 ° C Range 150 m. Operating Frequency ISM band: 868.0125 to 869.9878 MHz in Stop category 1 Technology LBT Range at 20 ° C: about 50 hours. transmitting apparatus: AT MYTH - MINI receiving apparatus: AR MYTH - MINI R & TTE Directive 99/05 / EC EMC Directive 2004/108/EC Low Voltage Directive 2006/95/EC Applicable standards EN 300 220 EN 301489-3 EN 61000-6 EN 60529
Pulse hot press used in product manufacturing process: soft line FFC and soft circuit board of FPC or rigid circuit board welding of PCB, TCP and PCB circuit board or a soft circuit board of FPC between the welding, soft circuit board of FPC and PCB between the circuit board welding etc The product is used in welding pulse hot pressing machine and it is pulse heating welding, through the pulse current heating thermocouple transmission to joint parts in close contact, without the heat effect on peripheral devices This product is used in pulse welding machine, It is the pulse welding Heating body, It by thermocouple transmission pulse electric current to Heat, make the joint part is in close contact condition, with no heat Affected around the device. Usage: Our products are widely used in various electronic components with a Small coil manufacturing production, Used in high-frequency Communications components, SMD transformers, SMD chip inductors, Winding inductanceï¼?Coil inductors,miniature,Speakers, induction IC card, Proximity card,Proximity key,RF Inlay smart card,buzzers, receivers, speakers, headphones, Antennas, microphones, transducers, hands-free headset, vibration Motor, micro-motors, clocks coil, the coil module and other small Electronic components soldered contacts and also can weld metal wire, Metal strip, metal sheet, a solar cell, the data lines, Telecommunications lead solder contacts. Welding head classification: 1. Resistance Welding Heads 2. Spot Welding Heads, 3. Butt Welding Head, 4. Hot Bar Reflow Soldering Heads 5. Ultrasonic Welding Machine Welding Head Note: Document prices and pictures are for reference only, We will according to customers drawings or samples of spot welding head for quotation. Advantage: Pulse hot press mainly used in normal SMT reflow oven should not perform welding device for welding operation, and the use of iron welding is easy to occur when welding appearance inconsistent, uneven, prone to dry and easy to weld the bad products. While the pulse hot press is different from the temperature soldering iron, pulse hot press in electrified instantly achieve the desired temperature, and once the head ends without voltage, instantly to reach room temperature; and the welding head flat, so the welding flat appearance, rarely weld bad.
Air conditioner, wash machine, film stretch, latex gloves, parquet, boilers.
Turn Milling Parts, Black Steel, Stainless Steel Welding Parts, Stamping Parts, Injection Moulded Parts..
We are TITLE HOLDER PARTNER! VERY IMPORTANT: The seller requires Proof of Funds (POF) before proceeding with any transaction. COMMERCIAL TERM SHEET - FOB DIP & PAY TRANSACTION PROCEDURES FOB ROTTERDAM/HOUSTON/FUJAIRAH JET FUEL A1 , EN 590 10 ppm Validity: End of August 2024 AVIATION KEROSENE JET FUEL A1: Origin: Any Non-Sanctioned country Trial Order Quantity: Minimum: 1,000,000 BBL Maximum: 4,000,000 BBL 12-Months contract Quantity: Minimum: 12,000,000 BBL Maximum: 48,000,000 BBL PRICE FOB Rotterdam: NWE Platt (Platt Code No: PJAAV00) Minus US$8.00 Per BBL PRICE FOB Houston: US Gulf Coast Platt (Platt Code No: PJABN00) Minus US$8.00 per BBL Terms of payment: By MT 103/TT for the First lift and Standby Letter of Credit (SBLC MT 760) or Documentary Letter of Credit (DLC MT 700) for 12 months contract Inspection: By SGS or equivalent Specifications: As per Exhibit 1 , attached DIESEL GAS OIL EN590 10PPM: Origin: Any Non-Sanctioned country Trial Order Quantity: Minimum: 50,000 MT Maximum: 400,000 MT 12-Months contract Quantity: Minimum: 600,000 MT Maximum: 4,800,000 MT PRICE FOB Rotterdam: NWE Platt (Platt Code No: AAWZD00) Minus US$90.00 Per MT PRICE FOB Houston: US Gulf Coast Platt (Platt Code No: AATGZ00) Minus US$90.00 Per MT PRICE FOB Fujairah: NWE Platt (Platt Code No: AAWZD00) Minus US$110.00 Per MT Terms of payment: By MT 103/TT for the first lift and Standby Letter of Credit (SBLC MT 760) or Documentary Letter of Credit (DLC MT 700) for 12 months contract Inspection: By SGS or equivalent Specifications: As per Exhibit 2 , attached FOB DIP & PAY TRANSACTION PROCEDURES: ( TANK TO TANK / TANK TO VESSEL )
Air freshener 250ml aluminum.
Air conditioning systems, office furniture, concrete, home appliances, concrete products, bathroom furniture, bathtubs, shower boxes, fire prevention devices, bricks, tiles, sanitary ware and fittings, hydraulic material, construction steel, marble, stone and, mosaic, urban furniture, awnings, green building materials, curtains and blinds, steel prefabricated elements, kitchen furniture, prefabricated reinforced concrete elements, gutters and down pipes, prefabricated wooden elements, plumbing and conditioning material, sand, gravel and crushed stone, home furnishings, lighting, building material, boilers and hardware, gypsum board, ceiling false panels.Sales & Logistic
Aluminum ingots, copper cathodes, zinc ingots.Agents
Polyurethane foam blocks, polyurethane foam sheets, mattresses.
Scrap metal, HMS1 and HMS 2, aluminum, steel, copper, brass, alloy wheels.Exporter
ABS with PC Scrap Our suppliers distribute different types of plastic materials that we transform and sell in the national and international market.
PP with glue for information contact us --> sales@tecompound.it
HDPE from pipes, drums and jerry cans - grinded diam.12/14 flakes, unwashed, mix color
- PVB scraps clean transparent single layer 1350€/ton --> 30 ton per month - PVB scraps clean transparent double layer 500€/ton --> 10 ton per month - PVB scraps mixed coloured/transparent single layer 500€/ton --> 10 ton per month - PVB scraps wiring transparent single layer 350€/ton --> 22 ton per month - PVB scraps wiring transparent double layer 300€/ton --> 25 ton per month Origin : Italy
