Power: 5.0
Voltage and current: 380v/13a
Adaptation bearing diameter: >30
Largest bearing diameter: 500
Maximum bearing width: 140
Maximum load-bearing: 65
Heating configuration: 20.30.40.60
We are the manufacturer and supplier of thermic fluid heater.
Features:
Thermic fluid heater temp : 30000 c. Standard model, 35000 c high temperature models & 40000 c vapour design.
Capacity : 30000 kcal/hr to 9 million kcal/hr.
Fuel : wood, coal, lignite, diesel, ldo, fo, bio-mass, husk, biogas, pet-coke fired, agro waste, electrical thermic fluid heater.
MODERN Series Induction Heaters carry the most advanced transduction control technology. By long distance induction, electric power is transmitted into heated conductors efficiently and the temperature of conductors is quickly up. The series is the best equipments to remove collision stress from thick metals.
The heating way is direct, no fire, safety, efficient and green. It has been the best heating equipments for auto frame, chassis, connection plate, etc. before and after straightening. It avoids the hidden danger of fire heating.
The heating equipments are equipped with handle torch of different shapes, so more efficient.
Our SPQ-10 has air conditioning water cooling system.
SPQ-06 has water cooling system.
SPQ-1.5 has air cooling system and special for 4S car shop.
Specification:
SPQ-1.5 Dimension300mm*300mm*220mm
Input Voltage2phases 220V
Output Power1.5KW
Tube Length6m
Cooling SystemWater cooled
Weight12kg
Model
SpecificationSPQ-06
Input Voltage1 Phrase 220V/50~60HZ
Input Power 6KW
Water Pump Power0.33KW
Load duration rate60%
Host Volume900mmX830mmX590mm
Weight120KG
Hand lead line /weight¦µ5.5X20CM/2KG
Hand lead line extension6M
Water Tank 25L
Cooling systemAir Condition Water cooled
Circulation Period>60Mins
1.Fast, effortless removal of glass, emblems, bonded body components, rusty bolts and much more.
2.Flameless heat reduces the need for torches, solvents and abrasives.
3.Less flame and solvents reduces potential safety hazards and insurance rates.
4.Only heats metal objects, enabling it to be used in or near heat-sensitive areas.
5.Wide range of heating inductors for increased versatility.
6.Easy-to-read heat output meter to quickly verify induction heat.
7.Output isolation transformer provides the safest possible operation.
Model: spq-1.5
Dimension: 300mm*300mm*220mm
Input: /input voltage: 2phases 220v
Working frequency: auto frequency locking and tracking.
Output power: 1.5kw
Tube length: 6m
Cooling system: air cooled
Working cycle: >45 minutes
Weight: 12kg
Model: spq-1.5
Dimension: 300mm*300mm*220mm
Input: /input voltage: 2phases 220v
Working frequency: auto frequency locking and tracking.
Output power: 1.5kw
Tube length: 6m
Cooling system: air cooled
Working cycle: >45 minutes
Weight: 12kg
MODERN Series Induction Heaters carry the most advanced transduction control technology. By long distance induction, electric power is transmitted into heated conductors efficiently and the temperature of conductors is quickly up. The series is the best equipments to remove collision stress from thick metals.
The heating way is direct, no fire, safety, efficient and green. It has been the best heating equipments for auto frame, chassis, connection plate, etc. before and after straightening. It avoids the hidden danger of fire heating.
The heating equipments are equipped with handle torch of different shapes, so more efficient.
SPQ-1.5 has air cooling system and special for 4S car shop.
SPQ-06 has water cooling system.
Our SPQ-10 has air conditioning water cooling system.
It has a very high degree of efficiency and is water-cooled using a closed compressor-powered system. Through the use of automatic control monitors, the power output remains constant during the heating process.
The SPQ -06/10 is designed for heavy work demanding fast and thorough heating of the material, for example, for straightening of chassis, and for coarser parts and axles. This machine is convenient for heavy-duty vehicle repairs.
SPQ-06/10 Induction Heater is the top efficient equipment used for repairing heavy duty and car chassis. When using our induction heater, the temperature can be up to 600¡ãC within seconds,which can soften 5mm plate within 8 seconds and soften 8mm plate within 12 seconds. The induction heater can work over 60 minutes constantly, which can save your time and improve working efficiency with a steady performance.
FEATURE:
Power Consumption: 850W-900W
Working Voltage: 220 -240volts, 50 Hz
Surface color: white
Front Surface Temperature
Materials: Aluminum
Protection : Inner Temperature control device protects again over heating
Energy Transfer Ratio 98%
Life span: 100000H
Mounting: Wall mounted or ceiling mounted or free standing
cable 3M with VDE certificate
SIZES / POWER
As mentioned four standard sizes, . Other sizes and powers are availabe in OEM production. Please send us your requirements and we design and quote your individual panel.
Higher surface temperatures provide better efficiency rates .We offer our standard sizes with different powers/surface temperatures according to customers demand.
INSTALLATION / USAGE
ALL panels are ready to use and fast installation possible (all necessary tools included in standard packing). Mounting of panel possible in 5 minutes (plug in type, 3m power cable). All panels can be either wall or/and ceiling mounted. Furthermore, we provide accessoires for floor standing.
Advantage:
1. Energy-saving
It can be used together with temperature controller to form infrared radiant heating system. According to the temperature needs of the user, the temperature in each room can be freely adjusted. When the indoor temperature reaches the preset temperature, the heating system will automatically stop and the heat accumulator begins to emit heat so as to maintain the preset temperature for a long time, saving energy and power.
2. Environmenal protection
Its energy is electricity so that is very evironmental.
3. Safety and comfortable
It won't explode or emit odor, wind or noist.
4. Long life expectancy
It can be used more than 20 years.
5. Health care
The heat radiant can change body microcirculation, cell organization under skin producing resonance, clearing the barrier of microcirculation, adjusting and balancing nervous system promoting metabolism, increasing body physical power. It is very good for your health.
Cast aluminum heating loop is a kind of electric heater, using tubular electric heating elements and a high-grade aluminum alloy shell, with a general operating temperature of 150 to 450 degreesc. It is applicable to plastics machinery, die heads, cable machinery, and equipment in chemical, rubber, and petroleum industry, etc. Cast aluminum heater is featured by long service life, excellent heat-insulating properties, outstanding mechanical properties, corrosion resistance, and magnetic reactance, etc.
1) customers shall provide product drawings or samples, if drawings or samples are not available, please provide specifications, models, voltage, and power, etc. Of the products.
2) power handling of the surface of cast aluminum heater is 2.5--4.0watts per square cm.
Use instructions,
Use instructions
1) the working voltage shall not exceed the rated value by 10 percent,
2) the wiring part shall be outside the heating layer and insulating layer, the shell shall have effective grounding,
3) cast aluminum heating loop shall be placed in a dry place, if the insulation resistance is lower than 1megohm because it has been unused for a long period of time, please bake the resistance in an oven at 200 degrees c for 5-6 hours.
1)temperature can be adjusted. 2)the heater adopts ss heating tubes, warming up rapidly. 3)various kinds of stainless steel or carbon steel electric water tank heaters are adoptable according customers' requirements.
As to small machine, we will package it with wooden cases, as to large machine, we can use safe deliver by bulk cargo ship.
Asphalt heater is characterized by rapid heating, uniform heating, environmental protection. The power can be customized according to special requirements.
As to small machine, we will package it with wooden cases, as to large machine, we can use safe deliver by bulk cargo ship.
Air duct heater is mainly used to heat up the air in the airduct, can be classified into three types by high temperature, medium temperature, low temperature.The common ground on the structure is adopting steel plate to support the heating tube, in the purpose of decrease the shake of the heating tube when the fan stops.Overtemperature controller is installed in the junction box.The low temperature type air duct heater can be directly installed on the airduct, due to the differences from the structure, the medium temperature type and high temperature type electric air heater has a 100mm thick thermal insulation material layer between the duct exine and the junction box clamp, not only to decrease the whole duct external heat dissipation, but also bring down the temperature in the junction box.
Characteristics
1.Heating tube adopts outer coiled ripple-type ss belt, which enlarges the heat dissipation area, thus, it greatly improves the heat exchange efficiency.
¡¡¡¡2.Professional design, low wind resistance, uniform heating, no high temperature or low temperature blind angle.
¡¡¡¡3.Duplex protection, good safety performance.Temperature controller and fuse protector are installed, which can be used for controlling the heater operates normally under the condition of overtemperature and without wind, thus, to guarantee not a single miss in a ten thousand times.
As to small machine, we will package it with wooden cases, as to large machine, we can use safe deliver by bulk cargo ship.
Silicon rubber electric heating plate is mainly consists of nickel-chromium alloy heating wire and silicon rubber high-temperature insulation cloth. It has advantages of short heating time, uniform temperature, high thermal efficiency, high strength, convenient operation, long service life (4 years), and slow aging. Generally, the output power range is 0.4-0.8w/cm2. Since the output power varies with different installation and temperature regulation conditions of the heating sheet, please contact with us when placing an order.
Technical parameters
1. Highest temperature resistance of insulation material: 250 degreesc
2. Highest service temperature: 250 degreesc
3. Insulation resistance: 5 m ohms
4. Compressive strength: 1500v/5s5, power deviation: +/-8%
5. Damp resistance: end face plates are used for basic damp proofing, the product will be out of use, after being placed in water or covered with frost for a long period of time.
1.áPiezo-Electric Ignition mode
2.áinfrared, fast heating, energy saving
3.áAnti-tilt device and flame-failure protection device
4.á3 ceramic plates, three heat settings
5.áPower setting: from 1.55 KW to 4.2KW
6.áCastors for easy moving
7.áCapacity for gas cylinder up to 15KG.
Pure energy extracted from the ground water
Extremely efficient
The energy performance of the water-to-water heat pump models sets standards
The ratio of the free environmental energy gained and the electric energy input is extremely favorable
Sunte offers the new generation of water-to-water heat pumps
The compact sunte heat pumps ensure powerful and comfortable heating in a minimum
Of floor space
Heating capacities of up to 27kw can be produced using ground water of nearly all quality levels
This means that the sturdiness of the sunte devices sets new standards
An innovative spiral-type heat exchanger made of corrosion-resistant stainless steel, with even its solder seams sealed, ensures permanent operational reliability
Innovative freeze protection
Sunte stands for maximum operational safety
The spiral heat exchanger is protected against local ice formation on the inside due to its special geometry
Silent cooling
The eliwell cooling controller, available as an accessory, extends the functionality of the heat pump controller (manager) by adding the cooling operating mode
The transfer of the cooling output is effected by a heat exchanger the size of which depends on the desired output and the water quality
Integrated heat pump manager with 4 x 20-character lc display, comfortable operation with 6 keys, menu with plain-text display and diagnosis function
Highly efficient and quiet-running scroll compressor for the environ-safe refrigerant r407c evaporator for optimal heat transfer via highly efficient spiral-type heat exchanger with its solder seams sealed for optimized protection against corrosion and freezing for optimization of cooling circuit to ensure high coefficient of performance
