Glass fiber rebar or GFRP is a new kind of composite material which is used as reinforcement materials that combines with epoxy resin and curing agent then through pultrusion molding process. Products Feature: 1. High Corrosion Resistance:The base materials used by the bolt are durable materials, and they are molded through the composite process. The life span is up to 100 years. They can be used as permanent support materials; 2. High Tensile Strength:The load is approximately double that of a steel bar with the same diameter; 3. Low weight-The weight is only 1/4 that of a steel bar with the same diameter, therefore, the labor intensity is greatly reduced, and the transportation cost is reduced at the same time 5. Anti-static-It has no electrical conductivity, and no sparks will be produced when being cut, it's particularly suitable for high gas zones; 6. Non-flammable-It's non-flammable and has high thermal isolation; 7. Culpability-It avoids damages to cutter heads, and does not delay excavation 8. Save cost-Use this material as reinforcing bars for road and bridge, could reduce secondary repair cost. Material: 100% glass fiber and epoxy Surface: all thread Diameter: 3-40 mm Tensile strength: 780-1200Mpa Density: 1.9-2.1 g/cm3 E-Modulus: >45 gpa
Alloy Steel plates and round bars hot rolled and forged cold work tool steel machined and peeled and grinded alloy steel round bar Grade: 4130 4140 4145 4150 5140 8620 4340 52100 SCM420 42CrMo4 Standard: AISI, ASTM, BS, DIN, GB, JIS Technique: Forged Process: EAF+LF+VD Delivery time: 60~70 days Packing: Standard export packing
We sell F51 bars,billets, UNS S31803 duplex stainless steel seamless pipes,tubes,and we also produce F60,S2205,SAF2205,F61,S32500,F53,S32750,F55,S32760 pipes,tubes
We supply UNS N06250 forged,forging steel round bars,slabs and forming products seamless pipes,tubes,welded tubings,plates,forged flanges,butt welded fittings from china ASTM,ASME standards UNS N06250 forged,forging steel round bars,slabs and forming products seamless pipes,tubes,welded tubings,plates,forged flanges,butt welded fittings from china
Deformed reinforcing steel bars Debars for constructions, sizes from 8mm up to 32 mm in 2 mt export bundles manufactured according to bs/din/gost/en or astm standards Origin: ukraine, turkey, iran, russia, china, india Payment: 100% sight lc or deferred payment lc is acceptable. Size: 8mm up to 32mm Bundle weight: 2 mt max. Length: 12 m or 11.7 m
Section steel: 1. Hot rolled i-beam Size: 8#-63# ( japan, europe standard ) Material: q235, q345 2. Hot rolled channel steel Size: 5#-40# ( japan, europe standard ) Material: q235, q345 3. Hot rolled angle bar Size: 20*20mm-200*200mm, 45*30-200*125 Material: q235, q345 4. Hot rolled h-beam Size: 100*50-800*300m Material: q235, q345 5. Hot rolled flat bar, chord plate, galvanized flat bar Size: 12mm-300mm Material: q235, q345, 60simn, 65mn 6. Ledge steel Specification: d15, m15, m18, e19, m22 Material: m540 7. Mining i-beam Specification: 9#, 10#, 11# 8. U-blacket steel Specification: 25u, 29u, 36u Material: 20mnk 9. Hot rolled square steel Size: 10*10mm-80*80mm Material: q235, q345, 10-45# as well as various alloy steel Standard export seaworthy packing
china coal 0001 Introduction of GB Standard Steel H Beam Hot rolled H-beam, h beam Grade: Q235B, SS400, Q235, Q345, Q345B, ST37-2, A36, S235JRG1 Technique: Hot Rolled, Welded We supply high quality H-beam steel with reasonable price. Including Chinese standard, Japanese standard and so on. Material: SS400, ST37-2, A36, S235JRG1, Q235, Q345 etc. Length: 6meter, 9meter, 12meter Parameter of GB Standard Steel H Beam Hot Rolled H-beam GB/T11263-1998 SIZE SECTION DIMENSIONS (MM) KG/M H B t1 t2 r 100X100 100 100 6 8 10 17.2 125X125 125 125 6.5 9 10 23.8 150X100 148 100 6 9 8 21.4 150X150 150 150 7 10 11 31.9 175X175 175 175 7.5 11 13 40.2 200X150 194 150 6 9 13 31.2 200X100 198 99 4.5 7 8 18.5 200X100 200 100 5.5 8 11 21.7 200X200 200 200 8 12 13 50.5 250X175 244 175 7 11 16 44.1 250X125 248 124 5 8 8 25.8 250X125 250 125 6 9 12 29.7 250X250 250 250 9 14 16 72.4 250X250 250 255 14 14 16 82.2 300X200 294 200 8 12 18 57.3
china coal 0001 Introduction of 50kg Railway Heavy Steel Rail U71Mn Steel Rail for Raileay Nominal weight per meter rail is greater than 30 kg, are heavy rail, heavy rail is divided into two general rail and crane rails. General rail means laying railway lines, dedicated lines, curves and tunnels by rail. Among them, the standard gauge length of 12.50 m and 25.00 m are two, laying rails bend curve, shorter length, there are 12.46 m, 12.42 m and 24.96 m, 24.92 m, are generally rail specifications for 38,43,45,50 , 60 (kg / m). Parameter of 50kg Railway Heavy Steel Rail U71Mn Steel Rail for Railway Model Head width Rail height Web Thickness Bottom Width Weight Material Rail length 38kg/m 68mm 134mm 13mm 114mm 38.733 kg/m U71Mn/U71 /45Mn 12,12.5m 43kg/m 70mm 140mm 14.5mm 114mm 44.653 kg/m U71Mn/U71 /45Mn 12,12.5m 50kg/m 70mm 152mm 15.5mm 132mm 51.514 kg/m U71Mn/U71 /45Mn 12,12.5m
china coal 0001 Introduction of 43kg Railway Heavy Steel Rail Normally, steel rail is devide into light rail heavy rail and crane rail . The nominal weight of light rails is 30kg or less. Our light rails are available in various specs. and are mainly used for laying temporary hauling tracks in forested areas, factories, mines, and construction areas. Heavy steel rail is the main component of railroad track.Heavy steel rail's function is to lead the locomotive wheels go forward, bear huge pressure of the wheels, and transfer to the sleeper. Heavy steel rail must provide wheels with continuous and smooth and the least resistance of the rolling surface. Besides all kinds of international standard steel and iron products, we also can develop and manufacture various non-standard products. Here are the types of steel rails: It is including light rails, heavy rails, crane rails and rail fittings. 1)Light rails: 9kg, 12kg, 15kg, 18kg, 22kg, 24kg, 30kg Steel grade: 55Q / Q235 Length: 6m~12m Executive standard: refer to GB11264-89?¦ 2)Heavy rails: 38kg, 43kg, 50kg, 60kg Steel grade: U71Mn / 50Mn and so on Length: 12.5m Executive standard: refer to GB2585-81/QB In order to ensure better quality, our steel rails have to undergo many tests, including chemical composition test, tensile strength test, hardness test and the drop weight test. According to clients' demands, we can provid various specification rails with different materail/steel grade . Parameter of 43kg Railway Heavy Steel Rail Name of Commodity Specificaton Materials Standard of Products Theory Weight Length of Dimension(m) Packed in bundle with iron wire (pcs/bundle) Heavy Rail 38kg/m U71Mn/U71/45Mn GB2585-2007 Q/YYG002-2008 38.733 12,12.5 10 43kg/m U71Mn/U71/45Mn GB2585-2007 Q/YYG002-2008 44.653 10 50kg/m U71Mn/U71/45Mn GB2585-2007 Q/YYG002-2008 51.514 10
china coal 0001 38kg Heavy Railway Steel Rail Keywords:Heavy Rail, 60 Kg Rail. Standard Steel Rail, Railway Steel Rail, Railway Track, Railroad Track, Railroad Track For Sale, Railroad Rail Introduction of 38kg 43kg 50kg Heavy Railway Steel Rail Nominal weight per meter rail is greater than 30 kg, are heavy rail, heavy rail is divided into two general rail and crane rails. General rail means laying railway lines, dedicated lines, curves and tunnels by rail. Among them, the standard gauge length of 12.50 m and 25.00 m are two, laying rails bend curve, shorter length, there are 12.46 m, 12.42 m and 24.96 m, 24.92 m, are generally rail specifications for 38,43, 45, 50,60 (kg/m). Parameter of 38kg 43kg 50kg Heavy Railway Steel Rail Model Head width Rail height Web Thickness Bottom Width Weight Material Rail length 38kg/m 68mm 134mm 13mm 114mm 38.733 kg/m U71Mn/U71 /45Mn 12,12.5m 43kg/m 70mm 140mm 14.5mm 114mm 44.653 kg/m U71Mn/U71 /45Mn 12,12.5m 50kg/m 70mm 152mm 15.5mm 132mm 51.514 kg/m U71Mn/U71 /45Mn 12,12.5m
Introduction of U71Mn Standard Crane Rail QU70 1.Size: QU70,QU80,QU100,QU120 2. Material : U71Mn 3.Standard: YB/T5055-93 STANDARD 4.Length: 12M Parameter of U71Mn Standard Crane Rail QU70 Mode Size mm AXBXCXD Weight(kg/m) Length(m) QU70 120x120x70x28 52.80 9/9.5/1010.5/11/11.512/12..5m QU80 130x130x80x32 63.69 9/9.5/1010.5/11/11.512/12..5m QU100 150x150x100x38 88.96 9/9.5/1010.5/11/11.512/12..5m QU120 170x170x120x44 118.10 9/9.5/1010.5/11/11.512/12..5m
Introduction of QU80 71Mnk 45Mnk Crane Steel Rails Size: QU70,QU80,QU100,QU120 2. Material: 71Mnk/45Mnk 3.Standard: YB/T5055-93 STANDARD 4.Length: 6m/8m/10m/12m 5.Application: for mining/Engineering and so on Parameter of QU80 71Mnk 45Mnk Crane Steel Rails Mode Size mm AXBXCXD Weight(kg/m) Length(m) QU70 120x120x70x28 52.80 9/9.5/1010.5/11/11.512/12..5m QU80 130x130x80x32 63.69 9/9.5/1010.5/11/11.512/12..5m QU100 150x150x100x38 88.96 9/9.5/1010.5/11/11.512/12..5m
china coal 0001 DJB600 Mental Roof Beam Keywords: Hinged Roof Beam, Roof Beam Price, Mental Roof Beam Introduction of DJB600 Mental Roof Beam This products are mainly used for the top plate support,it has two types : mental articulated roof beam Mental roof beam This products are mainly used for the top plate support,it has two types : mental articulated roof beam; mental non-articulated roof beam. technical parameter of mental non-articulated roof beam Parameter of DJB600 Mental Roof Beam Length:600mm  Permitted bending strength(KNM) girder:52.5 Permitted bending strength(KNM) articulated part:30 Adjust angle vertical angle:7 Adjust angle horizontal angle: 3 Weight :18.9
Product name:Stainless steel angle bar Gade:201,202,301,303,304,304L,305,316,316L,321,410,416,420,430... 1.4301, 1.4306, 1.4845, 1.4401, 1.4371, 1.4597,1.4541, etc Standard:ASTM, EN,DIN,JIS Shape:Right angle tolerance is 90 degrees ±2 Tolerance of cut-length or muitiple length: 0-+50mm Surface:Pickled or sand blasting.no harmful imperction exist. Usage:1.Widely used in the areas such as stainless steel fasteners,chains.kitchen and sanitarywares,furniture handles,handrail,electroplating and electrolyzing pendants,food,electro,petroleum,construction and decoration,etc. 2.electronic products parts,medical appliances,springs,bus inside and outside packing and building,street lamp posts,etc.decoration materials and outdoor publicity billboard.used for the products which have the anti-stress corrosion requirement.electron products,table-wares,bolts,nuts,screen mesh, combustor and so on. Max bending:4 mm/m Condition of delivery: Austenite in solution,ferrite in anneal or in accordance with client's detailed requirement MOQ:1 Metric ton Price terms:CIF or FOB Shanghai Payment terms:L/C or T/T supply ability:25 Metric tons per day Delivery Detail:7-30 days,according to the quantity. Packaging Detail:Full wrap by plastic packing-cloth
SS431 bright bar dia from 8mm to 250mm, Moq is 1 ton.
steel bar bender, rebar bending machine, cheap price.
We have Steel Rebar ASTM A615 Made in Saudi Arabia from SABIC (Saudi Basic Industries Corp.) International Standard Steel Rebars for Construction Industry.We are mandate holders for the Saudi Arabian Government. This is the first time that Saudi Government allows for export of steel rebars to out side countries. The quality of SABIC steel is one of the best in the world. Commodity: Hadeed Sabic Steel Rebar Quantity: 1,000,000 MT (one Million Metric Ton) PER MONTH Mode of Payment: 20% Advance at sight and 80% LC (Letter of Credit). Grade: ASTM 615 Grade 60, Free from Rust + Bend + Full Length Price: Negotiable. Manufacturing: Production of 2017-2018 (all new batch production) Sizes: 8mm to 32 mm Shipment: Steel rebars will be shipped in bulk, each shipment 35,000 to 40,000 MT. In cannot be loaded in containers. Length of steel rebars is 12 meters.
Hard chrome plated around bar : 1.. Supply condition Ground and chrome plated 2. Chrome thickness 20 to 30 micron 3. Surface roughness Ra0.2 micron and rt2 micro 4. Tolerances on dia Iso f7 on the diameter 5.Ovality Half of the tolerance iso f7 6. Straightness 0.2mm/m 7. Surface hardness 850-1150hv (vickers 100g) 8.Cohesion No cracks, breaking or detaching after thermic shock(warming up at 300 celsius degrees and cooling in water) 9 .Porosity Test according to iso 1456/1458 and result yaluation according to iso 4540 rating 8-10 10 corrosion resistance Test in natural salt spray according to astm b 117-72hours Results evaluation according to iso 4540 rating 7-10 11. Weldability Good 12. Packing Anti rust oil to be applied on material and each rod to be packed in paper sleeve
Our products subjected to heat treatment, thus improve the hardness and toughness, can reduce consumption for buyers
1,Size of 1020 steel round bar buy from China Round bar Diameter(mm) Length (mm) 20~800 3000~9000 Plate Thickness(mm) Width (mm) Length (mm) Max:800 Max:2200 Max:9000 The specification can be customized. 2,Chemical Compositons of 1020 steel round bar buy from China C Si Mn P S Cr Cu Ni 0.15-0.25 0.17-0.37 0.50-0.80 0.035 0.035 0.25 0.25 0.30 3,Features of 1020 steel round bar buy from China 1, Medium carbon structural steel 2, High strength and machinability 3, Good toughness, plasticity and abrasion resistance 4, Typically used in quenched and tempered or normalized conditions 4,Typical Applications 1, Widely used in machine manufacturing 2, For shaft parts 3, Stamping die drawing parts repair and hardfacing
