í( Laser: 50mW 473nm wavelength green laser, TE-cooled í( Play Mode: Sound Active, AUTO, DMX512 (7 channels), Master/Slave í( Interface: 3 pins XLR jack for DMX or Maser-Slave linking í(Power Supply: 100~250V, 50/60HZ, 30W í(Size: 360*260*100 mm í(Weight: 6.3Kg
Scanner: Micro-step motor scanner, big angle scanning Laser: 20~30mW 532nm wavelength green laser Play Mode: Sound active Power Supply: 100~250V, 50/60HZ, 20W Size: 50*260*100mm Weight: 2.8Kg
í( Features: RGB full color animation laser with high-speed optical scanner to create animated graphics,128 beam and graphics show patterns, and with the function of unique blanking, frequently flashing, rotating, movement, billowing, zoom (+/-), drawing, speed and color, ect. í( Scanner: High-speed optical scanner, big angle scanning í( Laser: 50mW 532nm wavelength green laser, TE-cooled 200mW 650nm wavelength red laser, TE-cooled 50mW 473nm wavelength blue laser, TE-cooled 300mW mixed white laser í( Play Mode: Sound Active, AUTO-Beam, AUTO-Animation, DMX512 (12 channels), Master/Slave, PC Control í( PC control: Compatible ILDA laser show software with ILDA interface. Use electronic switches to conversion full ILDA signal. í( Safety Capacity: Automatically identify ILDA or built-in program mode. Master/slave mode, DMX512 and PC control mode, will shut off laser automatically without trigger signal. Design according to security and good performance, safer to human and environment í( Power Supply: 100~250V, 50/60HZ, 100W Size: 500*330*170mm í( Weight: 10Kg
Features: Red, green and yellow firefly twinkling laser, more than 2000 beams shooted out from theaperture within 70 angles. The effect of rotating direction, frequently flashing, swarming and twinkling looks like firefly in the sky. Advanced design program, unique blanking effect. Four modes in one: Sound Active, AUTO, DMX512, Master/Slave for different applications Laser: 50mW 532nm wavelength green laser 100mW 650nm wavelength red laser Play Mode: Sound Active, AUTO, DMX512 (5 channels), Master/Slave Interface: 3 pins XLR jack for DMX or Maser-Slave linking Power Supply: 100~250V, 50/60HZ, 20W Size: 100*140*290 mm Weight: 3.5Kg
6.2 mega pixels Image SENSOR: 1/2.5" CCD Approx.6.2 Mega pixels Lens: FOCAL Length: Wide:5.8,Tele:17.4mm F No.: Wide: F2.8.Twlw: F4.8 LCD Display: 2.0" color TFT LCD Focusing: Type: Auto Focus with 3x optical zoom Range: Macro: 10cm to infinity;Normal: 50cm to infinity Digital Zoom: Capture Mode:5x & Play Mode:5-8x Shutter: Mechanical shutter and Electronic shutter Speed: Normal: 2f+1/1000 sec. Night Sense: 8f+1/1000 sec Exposure: Control: Programmed AE Compensation: f+2EV(0.5EV/steps) Equivalent: Auto,100,200,400 Flash: Modes: Auto/Flash off/Auto & Red-eye reduction Range: 0.2f+3.0m(Recharging time: Approx.:7sec.) White Balance: Auto/Daylight/Cloudy/Fluorescent/Tungsten/Sunset/Custom Shooting: Still Image: Single image, Live View: 25 fps for 320x240 at normal light level Movie Clip: Size: 640x480,320x240 with Audio Recording time is based on memory capacity Effect: B/W,Normal,Sepia,RGB custom;Sharpness: Soft,Normal,Vivid;Metering: Multi,Spot Self-timer: 10 SEC..2 SEC.,double with LED indicator Storage: Internal memory:16MB flash memory/External memory: Support SD Card File Format: Still Image: JPEG EXIF 2.2,DCF1.0,DPOF1.2 Movie Clip: AVI with Audio PictBridge(Direct printing) compatible Image Size: [8M]: 3264x2448 pixels via interpolation,[6M]: 2816x2112 pixels [5M]:2560X1920 pixels [4M]: 2304x1728 pixels,[3M]: 2048x1536 pixels,[2M]: 1600x1200 pixels Photo Frame: 9 Options and combine to image automatic Voice record: Yes Gaming: Yes Support Image Play: Single image/AVI play/Wav play/Thumbnails/Slide show Interface: Digital output connector: USB1.1 Mic-in,video out,Speaker,headphones Power Source: 2 pcs of AA alkaline/2 pcs of Ni-MH Dimensions: 105x52.2x30.8mm(TFT surface to Lens surface) (WxHxD) Weight: 142g(without batteries and card) Software: Mass Storage Driver for Windows 98 SE (Windows 2000/ME/XP,Mac OS 9.x or later) Accessories: 1)Pouch 2) Nect strap Colors Available : Sliver Type of Packing : Color Box Package Includes : Installatoin CD , USB Cable , User Manual
Laser engraving machine Many series of laser engraving machine.Fs900, fs1200, v-9, v-12, t-9, t-12 High efficiency and stable laser power Flexible laser power , speed and focus adjustment Professional mechanical design, accurate motion processing Free control software (windows platform), plt, bmp, dst, dsbm, dxf formats compatible
Vinyl cutter contour cutting We product s series servo vinyl cutter and c series step vinyl cutter All the machine can contour cutting and batch cutting C series stepper vinyl cutter C12, c24, c30, c48 the the pruducts has high precision, using steel axes, which can prevent slipping while cutting long materials. Using high speed arithmetic microprocessor, stable processing, have low noise and no zigzag while cutting . Have ultra pressure, capable of punching thick engneering materials, the cutting force and working speed can be adjusted while cutting . Using high resolution lcd back ligh dispalay. If you want to get more information welcome to communicate with me
Laser Type:Q-switched Nd:YAG Laser Wavelength:1064nm/532nm Output:200mj400mj600mj Pulse Duration:
Wavelength: 630~660nm, output pattern:1 vertical & 1 horizontal line, self-leveling range:+/-5 degree, self-leveling time:+/-5 sec. Safety protection lock assembly. Easy toch swith function. 1/4" thread adaptor can connect with almost camera tripods. Carton size: 48*42*29cm, n.W.:8.4kgs, g.W.:9.5kgs, single product:71*47*96mm
Image Pick-up Device: 1/3 OV COLOR CMOS Horizontal Resolution: 380 TV Lines Sync System: Internal Synchronization TV system: PAL/NTSC Gamma Characterlstic: >0. 45 Video Output: 1. 0Vp-p 75 ohm S/N Ratio: More than 46dB(AGC Off) Lens: 2.8mm 3.6mm Lens (optional) White Balance: AUTO Minimum Illumination: 0 Lux/F1. 2 BLC: AUTO Waterproof Rate: IP66 Mirror image and inverseimage can be chosen Power Supply: DC12V,
Two-way passive loudspeaker system--ct121 Features: Strong mdf enclosure Molded-in 70~{!c~}x40~{!c~} High power output Flexible mounting options Applications: Live club Club installs Specifications: Frequency response: 65hz-20khz(~{!@~}3db) Low frequency limit: 50hz (-10db) Hf drivers: 1x1.4~{!1~} (35mm) exit compression driver Lf drivers: 1x12~{!1~} (300mm)/3~{!1~}(75mm) voice coil Rated power: 250w rms 600w peak Recommended amplifier: 200-600w Sensitivity: 97db/1m/1w Max spl: 121db continuous, 127db peak Impedance: 8 ohms Dispersion(-6db): 70~{!c~}x40~{!c~} Crossover: 2.2 khz passive Finish: textured blue, black or white Grille: black perforated steel Dimensions (wxhxd): 412x553x352mm Weight: 20kg Dimensions (wxhxd): 412x553x352mm Weight: 20kg
Two-way passive loudspeaker system--ct121 Features: Strong mdf enclosure Molded-in 70~{!c~}x40~{!c~} High power output Flexible mounting options Applications: Live club Club installs Specifications: Frequency response: 60hz-20khz(~{!@~}3db) Low frequency limit: 50hz (-10db) Hf drivers: 1x1.4~{!1~} (35mm) exit compression driver Lf drivers: 1x15~{!1~} (380mm)/3~{!1~}(75mm) voice coil Rated power: 350w rms 600w peak Recommended amplifier: 200-600w Sensitivity: 97db/1m/1w Max spl: 121db continuous, 127db peak Impedance: 8 ohms Dispersion(-6db): 70~{!c~}x40~{!c~} Crossover: 1.5 khz passive Finish: textured blue, black or white Grille: black perforated steel Dimensions (wxhxd): 470x652x423mm Weight: 28kg Dimensions (wxhxd): 470x652x423mm Weight: 28kg
Ps3 at usd 420 Ipod 4gb @168 Ipod 2gb @149 1k/week supplied Enquire for more.
SHF800 ex-proof camera housing is designed for use in explosive atmosphere such as gas group ó=C (typical gas vapours: hydrogen, acetylene, ethene, coke-oven gas and methyl ether etc.) as well as flammable dust. The housing is designed to prevent explosion by containing any heat, sparks or flames generated. This prevents potentially explosive atmosphere or materials outside the equipment ignited. SHF800 is equipped with wiper to keep the glass clean. It accommodates most camera / lens combinations with sunshield and wiper matched. It transmits real-time video and on-the-spot scanning, with functions of real-time video storage and remote on-line transmission etc.. Features: * Explosion-proof mark: ExdIICT6/DIP A20 TA, T6 * Applicable to Zone 0 and flammable dust atmosphere * 316Líó316íó304 stainless steel and carbon steel optional * Polished finish appearance (plastic-spraying after carbon steel DACROMET is used) , corrosion-proof treated internal parts * Optional sunshieldíówiperíódefroster for lens and heating capability * Indoor / Outdoor applications * Design and manufacture on National GB3836-2000, GB12476.1-2000 basis Specification: * In accordance with IP68 * Cable Entries: 2í-G1/2í¦ Ex-proof cable entries, Dia. of inner hole ª¦12 * Unit weight: 10kg * Operating Temperature: -25-60íµ * Sight Glass Dimensions: ª¦70 mm * Outside Dimensions: 405 x 165 x 215 mm * Inside Dimensions: ª¦125 x 330 mm * High certification and moderate price * Heater works automatically to keep proper temperature of inside of the housing by built-in sensor Stamdard Lot Size: 46í-22.5í-26 cm
Description: SFY2006 integrated high-speed camera is designed for use in explosive atmosphere such as gas group ó=C (typical gas vapours: hydrogen, acetylene, ethene, coke-oven gas and methyl ether etc.) as well as flammable dust. With outside wash and water tank and all mechanical structure, it has integrated design, compact structure, small shape as well as easy installation and maintenance. With functions of maximum cruise speed of ex-proof products and characteristic speed change, it has flexible operation and quicker feedback. Features: * Ex-proof mark: ExdIICT6/DIP A20 TA, T6 * Applicable to Zone 0 and dust-ignition environment * 316Líó316íó304 stainless steel optional * Integrated configuration, built-in multifunctional decoder * Design and manufacture on GB3836-2000 and GB12476.1-2000 basis * Compact ex-proof camera housing and pan/tilt unit * Polished finish appearance, corrosion-proof treated internal parts * Its shell and rotational body are electro polished, 316L,316, 304 stainless steel construction that has a corrosion-proof design for both indoor and outdoor installation * Sunshield, wash and water tank, wiper, heater, presets, camera optional Specification: * Ex-proof mark: ExdIICT6/DIP A20 TA, T6 * IP68 * Pan rotate speed 45íp/s, tilt rotate speed 40íp/s * Pan range: 360íp; Tilt range: í+90íp * Pan rotate speed(íp/s): Fixed (6-20) / 4-20 adjustable / 0.1~40 adjustable Tilt rotate speed (íp/s): Fixed (6-20) / 4-20 adjustable / 0.1~40 adjustable * Baud Rate: 1200 2400 4800 9600 19200 * Preset Points: 80 * unit weight: 16kg * packed in carton * Packing size: 45 x 36.5 x 24cm
Description: SHJ400 Ex-proof Control Box is designed for use in explosive atmosphere such as gas group ó=C (typical gas vapours: hydrogen, acetylene, ethene, coke-oven gas and methyl ether etc.) as well as flammable dust. It is the remote front-end device that provides pan/tilt, cameraí»s lens aperture, zoom / focus and miscellaneous function control by matching monitoring host computer and decoding monitoring host computerí»s signal. Features: * Explosion-proof mark: ExdIICT6/DIP A20 TA, T6 * Design and manufacture on National GB3836-2000 GB12476.1-2000 basis * Applicable to Zone 0 and flammable dust atmosphere * Optional Decoder , Optional Preset positioning function * Polished finish appearance (plastic-spraying after carbon steel DACROMET is used) * 316Líó316íó304 stainless steel and Q235A carbon steel optional * Indoor / Outdoor applications * High certification and moderate price Specification: * Unit weight: 4.5kg * Operating temperature: -25~60íµ * Relative Humidity: í_95% ú¿+25íµú¬ * Cable Entries: 3í-G1/2í¦ Ex-cable entries , inner hole Dia.ºµ12 * Dimensions (L x W x H): 260 x 225 x 160 mm * Inside dimensions: ºµ149 x 110 mm * Communication Interface: RS-485 Half Duplex * Communication Distance: 1200 * Baud Rate: 2400 4800 9600 19200 * Voltage: 24V DC/220V AC * Current: 2 / 0.5A Lot Size: 26í-22í-26cm
Laser max power 30w Laser wave length (nm) 532 Frequency of laser power supply(hz) 400 Engraving range(mm) 80x80x100 650mmX650mmX785mm,12kg
Laser Medium :YAG Wavelength: 1064nm marking speed: 10-100mm/s marking dipth: 0.05-0.3mm marking scope 180X130mm Marking content: character & patten 1340mmX700mX1200mm
Wire less web camera
Pneumatic machine Product Description: Model No.: PEQD-100 Product Origin: China Brand Name: Perfect Supply Ability: 500 sets/month Price Term: FOB, CFR, CIF Payment Terms: T/T, L/C Minimum Order:1 set Delivery Lead Time: 7 days Certification: ISO9001 & CE Working principle: Computer controls the pin to move in X-Y plane and mark the logo on the target location of work piece. Applicable Material: It is suitable for flat surface marking on various kinds of steel, metal / non-metal labels & accessories. Application scope¦ It is applicable for the fields of automobile, motorcycle, mechanism, petroleum, aeronautical and space, electric apparatus and suitable for markings on steel, metal, nonmetal and hard plastic materials. It is adequate for marking logos, characters, serials numbers and VIN codes on bodywork of motorcycles, nameplates, connecting rods, engines, mechanical parts, machine tools, fastening pieces and various hard plastic products. Product Features: 1)Applying the most widely used up-down lifting structure to realize multi-functions. 2)Controlled by computer, with the easy-to-Coperate WINDOWS system, JIAXIN Lasers professional marking software has a wide application and can operate under WINDOWS 98/2000/XP. 3)Powerful edit function. It can mark any logo (character, letter and graph, data code, series number, VIN code, engine numbers) automatically. 4)It can support logos and graphs designed in DXF format from AutoCAD, CorelDraw. 5)It can support multi-kinds font: MG Font, SHX Font in Auto CAD, CHR in Borland, and TTF in Windows. 6)Marking contents could be saved automatically and not be destroyed during power-off of the machine. 7)It can be used online to share the database and data transmission with other equipment, such as match with electronic scales, bar code machines, leak detectors and other equipment. Technical Data Standard Marking Scope:150mm100mm / 200mm100mm Optional Marking Scope: 300mm200mm / 400mm300mm Marking Depth:0.01~2mm Marking Speed:ííí_50mm/s (for characters height of 3mm or 3-4 numbers /second) Lifting Range:0-300 mm Marking Accuracy:0.01 mm Pin Hardness:HRC 73 Power Supply:220V10¿¦, 50HZ Air Pressure:0.2-0.6 Mpa Machine Power:ííí_400 W Working Environment:-540 Whole Machine Weight: 60 Kgs Measurement:0.3 m2 Dimension Marking Machine Mainframe (LWH) :340420640 (mm) Controlling Cabinet (LWH) :483450177 (mm)
