Product introduction for busbar powered motorized transfer trolley The kinds of motorized transfer trolley is powered by busbar. The sliding line is usually installed between two rails or one side. The slider takes AC 380V from the sliding line to provide the motor through the electric control cabinet system. , to achieve the motorized transfer trolley to forward, back, start, stop and other operations. The power supply mode is as follows: a trench is opened on the side of the rail, a safety wire is installed in the trench, and a cover plate is laid on the trench. When the motorized transfer trolley is in operation, the cover is lifted by a flap device mounted on the flat cart, and the slider power is used to supply power to the motorized transfer trolley, and the motorized transfer trolley is automatically returned to the ground through the rear cover plate. Performance characteristics for busbar powered motorized transfer trolley The installation method of the trolley rails in this series is not fixed, and can be installed in the track or on one side of the trench or on the nearest wall according to the site layout. Suitable for medium and long distance, frequent start and stop, work environment with high work intensity. Usage and maintenance for busbar powered motorized transfer trolley During the use of the sliding wire, it should be taken to keep it free from foreign matter in the sliding wire. If there is any foreign matter, it should be cleaned in time to avoid poor contact and affect the use of the motorized transfer trolley. If you find that the cable insulation is damaged during use, replace the cable with new one.
