It is machine to adjust the mixing of pu, polysulphite and silicone type materials. This operating system is especially designed for the insulating glass production and improved. This machine can also be used as filling the cartridges by only releasing the mixing system. The mixed material can also be taken out of the gun. System works hydraulically and b component may work pneumatically if required. How to introduce the materials: A and b components seperately handled by the hydraulic system pumps. When the material is reloaded, it is necessary to empty the air inside the machine. Besides, time heaters available on specific parts to avoid the improper working under cold weather conditions. Mixing ratio: A and b component can be controlled seperately by either hydraulic system or dosing pump. The adjustment can be made as desired by any ratio figures are between 1:6 and 1:16 Mixing system: The mixers by the end of the extension output hoses mixes the materials homogenously and completely. Cleaning: It is necessary to clean and maintenance the machine after long periods of idle being of production. When the mixed material is forgotten inside the machine for a period of time, machine itself warns by the use of alert lamp. B component key is switched to the opposite direction allowing the by-pass system to fill the mixers with a component and so unwanted freeze can be avoided. Technical specifications: Mixing ratio: 1:6 / 1:16 Material output: approx 2.7 kg./min. Which may deviate according to material used Operating system: hydraulics ( a ve b compenant. B component may be pneumatic.) Operating pressure: between 250 - 450 bar Air pressure: max. 6 bar Power supply: 3 kw (380 v 59 hz.Expect the heaters) Controlling system: plc controlled Weight: 685 kg. Dimensions: 1700 x 1050 x 100 mm Weight: 685 kg. Dimensions: 1700 x 1050 x 100 mm In wooden case
