Acrylic foam tape: Application: 1. Ideal tape application temperature is range:20-30 2. Keep surface clean to obtain maximum adhesive power. 3. The holding power depends on the situation of surface. 4. The compress power should be at least 5kg/m2. 5. Holding power reaches its best after 72-96 hours the tape n adheres on. 6. Keep the tapes away from sunshine. 7. The using time span of tape is 30 years. Structure: Relative issues that may influence the holding power 1, time issue. There needs some time for acrylic adhere on the surface of spares. Usually the time span is 72-96 hours. 2, temperature issue. The suitable temperature is 21-28 3, pressure issue The suitable pressure is 5kg/cm2 4, situation of the surface It is better to be smooth. It is better to out of oil, water, finger print, dust, powder ect. Data sheet: DescriptionUnitresultTest method Adhesiveacrylic CarrierAcrylic foam ColorGray/clear/white Thicknessmm0.8±50um Release linerRed paper Standard widthmm400 Standard Lengthm33 Tensile strength (T-block) To aluminum Room temperatureGf/cm2�6500ASTM D-897 Holding power To stainless steel 80temperature 1000g static loadHr�24ASTM D-3300 Dynamic shear strength To stainless steel Room temperature after 20 minutes To stainless steel Room temperature after 24 hoursGf/cm2�3700ASTM D-1002 Temperature tolerance Short term 4 hours conditioning at indicated Temperature with 100g static load Long term Maximum temperature where tape Support 250g in static shear for 10,000 minutes160