Dust Collector Filter Overview Dust is mainly the equipment of separating dust from the flue gas. The performance of the dust collector can handle the amount of gas, gas through the resistance loss and the efficiency of dust control. Filter types including mechanical filter, static and wet dust collector, cyclone dust collector, filter cartridge dust collector, dust, etc. Commonly the filter used in removing dust project is divided into four categories. The dust catcher is rely on a variety of power separation and filtration of dust particles from the gas. Ordering Instruction Parameters of 2) medium characteristics (3) equipment materials 4. Inlet medium concentration 5. Other related requirements UnI-Filter Dust into the casing gas filtered by the bag (cartridge) dust, be trapped on external surface of the filter bag has been purified gas through the filter bag into the fan, the fan inhaled directly discharge, with the increase of filtering time outside of the filter bag adhesion of dust is also increasing, filter bag resistance also increases accordingly, which affect the dust removal efficiency, at the moment to start shaking institutions adhere shake down on the surface of the filter bag, dust, dust removed by manual pull out of the drawer. The working principle of single filter Dust gas from the air inlet into the box body by the filter bag filter, dust be trapped on external surface of the filter bag, after purification, the gas is removed by the fan through the outlet, outside the box directly into the interior can also answer the duct to the outdoor. As the host of continuous increasing work outside of the filter bag adhesion of dust, the device resistance rising, therefore must clear grey, to stick to the outside of the filter bag dust shake down, the ash bucket fell to the dust collector drawer by manual removal.