anifolds Suitable for any number of cylinders to be used at a time. Centre distance between the consecutive lugs is 350mm (14”) or 425mm (17”), 2 x 2, 3 x 3, 4 x 4, 5 x 5, 6 x 6, 7 x 7, 8 x 8 etc. Also manufactured as per customers requirement. We manufacture manifolds for all industrial gases in stainless steel pipe and forged blocks. As depicted below : For LPG in LOT or VOT Systems Part No. 1171 to 1177 Suitable for any number of S.C.V. type cylinders to be used at a time. Centre distance between the consecutive lugs is 350mm (14”) or 425mm (17”), 2 x 2, 3 x 3, 4 x 4, 5 x 5, 6 x 6, 7 x 7, 8 x 8 etc. Also manufactured as per customers requirement. As depicted below : Multi Lock Bearing Adapter cylinders fitted with self-closing valves to a high pressure system through a standard M.E.C.V. thread with unreduced pressure and a high flow rate. The adopters are fitted with a non return valve to ensure that there is no return flow of LPG whilst cylinders are being disconnected. The salient features of these adopters is the multipoint locking mechanism which combined with a face seal ensures that the adopter will not leak even if it is loaded off axis. The quick disconnecting arrangement coupled with a safety interlock ensures that the device can only be disconnected after turning off the gas flow. Both adopters featured above are available in 22 mm and 25.6 mm seats, and 3/8” or MECV outlet size. Makes available : Kosan | Vel | Gasman cylinders fitted with self-closing valves to a high pressure system through a standard M.E.C.V. thread with unreduced pressure and a high flow rate. The adopters are fitted with a non return valve to ensure that there is no return flow of LPG whilst cylinders are being disconnected. The salient features of these adopters is the multipoint locking mechanism which combined with a face seal ensures that the adopter will not leak even if it is loaded off axis. The quick disconnecting arrangement coupled with a safety interlock ensures that the device can only be disconnected after turning off the gas flow. Both adopters featured above are available in 22 mm and 25.6 mm seats, and 3/8” or MECV outlet size. Makes available : Kosan | Vel | Gasman Manifold Fittings for LPG Manifold Lug MECV MS Adopter • Union Pin Set With Nut • Non return valve for VOT manifold • M.S. Adopter 3/8” B.S.P.P.M. X Bull nose for FECV Nut. Available for ½" and 1" pipelines • Bung: Manifold bung for F valve fitting size ¾” B.S.P.T.M or ½”B.S.P.T.M. Standard Lot Size