Material: Q235B Steel (Chinese standard steel), SS304, SS316 & SS316L Surface Finish: Electro zinc plated ¨C for indoor use to BS EN 12329-2000, 12microns thick. Powder coated - for indoor use to JG/T3045-1998, between 6 and 10 microns thick Hot Dipped Galvanized ¨C for outdoor use to BS EN 1461-1999, between 60 and 80 microns thick Electrolytic Polishing ¨C for stainless steel use. Specification: Model W H L Thichkness LDT050TR 50 12 3000 1.0 LDT075TR 75 12 3000 1.0 LDT100TR 100 12 3000 1.0 The advantages of our cable ladder: 1. Low cost, significant cost savings compared to standard traditional tray products. 2. Light in weight, wide range of sizes. 3. Fast heat dispersion. 4. Strong enough to withstand short circuits. Provides strength, rigidity without additional hardware 5. Adapts to difficult architectural designs to accommodate changes in direction and elevation of cable runs. 6. Flexible, easy and fast installation. Design allows cable exit or entry at any point. 7. Cables can be secured to clamps or ties. 8. Various hardware accessories available to fix, support and install. 9. Safe smooth edge design to protect cable 10. Easy for line check and cleaning , easy maintained. Application: The electric cable tray system are widely used for construction projects, such as layingelectrical wire and cable. Making the lay of the electric wire, electric cable andpipeline achieved the universalized level. Installation Notice: Bends, Risers, T Junctions, Crosses & Reducers can be made from wire mesh cable tray straight sections flexibly in projects. Trays shall be supported at a maximum span of 2.5m by trapeze, wall, floor or channel mounting methods and will not exceed maximum loads as specified by the manufacturer. Wire Mesh Cable Tray systems can be safely employed in places where the temperature ranges between -40¡ãC and +150¡ãC without any change to their characteristics. Standard packing or customerized packing.