Bcm washing filter Characteristic of products: flow rate can reach 681 m3/hr for single system, auto-back-wash (without people operation). Model of products: waf-bcm Structure & working principle: When it need wash(controlled by time or differential pressure), especially for the housings, please turn off the inlet, and then turn on the contamination-draining passage, differential pressure lead partial fluid after filtration change its way and flow down, to make dregs wash/rinse to contamination-draining vent . If the filtrate is quite dear/expensive or harmful, we suggest you use the exterior kick-back washing configuration. Filter is self-service operation, and it can work at a long time. The precision of filtration is from 1¼¬m to 1, 700¼¬m. Filter is widely used in many kinds of fields, it owes to its design of modularization(standard), and it can not only satisfy the throughput of production , but also can be configured flexibly/neatly. Bcm(back-cleaning motor) can put 2 to 20 housings on to the same bracket , therefore, it makes its low cost changing into expansion of productivity come true. Using easy-clean cartridge greatly saves the labour costs, clean costs and production loss in using bag and container-filter, furtherly reduce the operation costs of productive periods, extend your firmf+s throughput. Features:: 1. Flow rate for single system up to 681 m3/hr 2. Slippery pipe and nozzle connecting, avoiding dead angle, lower pressure drop 3. The material and precision of cartridge can be widely chosen, to meet different application demand 4. Straight through valve allow speedly & frequently kick-back washing operation, and make its capacity maximum 5. During the backwash, each housing backwash in turn , to make sure mesh completely clean, and 6. The other housings not been affected and keep on filtrating 7. Automatic backwash (no people operation); consume little liquid, 2%less than the total flow rate.
