DAQ-GP-CAM is a wireless time-lapse camera based on 4G or WiFi, which can take pictures at certain intervals and upload to FTP server, launched by Shanghai Data Acquisition IOT Technology Co., Ltd. It can be widely used to capture the data of instruments, and can also be used for photo capture and video surveillance in the fields of cultural relics, rock and soil, hydrology and water conservancy. This product supports WiFi/4G Ethernet access to the network, take photos regularly and upload the photos to the designated FTP server or store them in an SD card. With 4G wireless network card, it can be used in scenarios where there is no WiFi network outdoors. 2 Service Concept Our company solemnly promise you: You buy more than just products, but also meticulous and thoughtful technical support. We provide free remote guidance, remote configuration and commissioning services, and send data to the server specified by the customer. Free IOT solution consulting services! 3.1 Camera Parameters and Selection Pixels: 2 million, 3 million, 5 million optional, default 2 million Lens: 2.8mm/4mm/6mm SD card: Yes Power supply: 12V DC Weight: 0.35kg 3.2 Electrical Characteristics Power supply mode: 12V DC or battery power (Power interface: DC5.5*2.1mm female socket, internal positive and negative outside). 3.3 Communication Characteristics Default networking mode: Ethernet/WiFi, 4G Image upload: FTP server 3.4 Structural Characteristics Antenna type: glue stick type external antenna Material: PC plastic (shell) Main body protection level: IP65 Size: 50mm 50mm 30mm 3.5 Working Environment Ambient temperature -30C~70C, humidity 0~95% (non-condensing) 4 The Core Advantages of the Product Simple installation and rapid deployment, helping IoT projects to land quickly Small size Rainproof, suitable for outdoor environments Comes with fill light, suitable for taking photos at night Remote configuration of parameters 5 WiFi Camera Configuration 6.1 Connect to Computer Power on the camera and connect it to the computer with a network cable. Check the IP address on the camera label, the default is 192.168.1.88 (the actual value on the camera label shall prevail). Set the computer IP to the same network segment as the camera, enter the camera IP in the browser, and enter the login interface By default, the username and password are admin (actually subject to the camera label). 7 Timed Photo Upload Settings Capture photos can be stored to SD card or uploaded to FTP server at any time and interval.
