Description CY9006 is a low cost, highly integrated 2.4GHZ wireless Line transceiver chip. The chip integrated transmitter, receiver, frequency synthesizer, and GFSK modem. The peripheral circuit is simple and only needs to be matched with MCU and a few peripheral passive devices. CY9006 transmits GFSK signal, and the maximum transmit power can reach 6dBm. The receiver adopts a low-IF structure, and the receiving sensitivity can reach -87dBm. The digital channel energy detection can monitor the channel quality at any time. The on-chip transmit and receive FIFO registers can communicate with the MCU, store data, and then transmit over the air at a 1Mbps data rate. It has built-in CRC, FEC, auto-ack and retransmission mechanisms, which can greatly simplify system design and optimize the performance. In order to improve the battery life, the chip reduces the power consumption in each link. The minimum operating voltage of the chip can reach 1.9V, and the minimum current is 1uA under the condition of holding the register value. Features Single-chip solution including RF front-end and digital baseband. Support frequency hopping Support SPI and I2C interface Built-in auto_ack function Data rate 1Mbps Very low power consumption Support signal energy detection Support SSOP16 and TSSOP16 packages APPLICATIONS Remote control Wireless keyboard and mouse Wireless networking Smart home Industrial and commercial short-range communications IP phones, cordless phones Intercommunication between machines